Alle auswählen
Ref.
Menge
Teilenummer
Beschreibung
Img
-
16DRUCKSCHEIBE; planet gear thrust
-
23PIN 15.88mm OD x 38.1mm L; SHAFT, planet gear
-
3VERRIEGELUNGSSTIFT 5/32'' x 1'', Slotted; Pin, 5/32'' x 1'', Slotted
-
31NADELLAGER Needle, 5mm ID x 2.38mm OD x 20.32mm W; SET, planet gear rollers (consists of 72 rollers)
-
43ZAHNRAD; planet (15 teeth)
-
51SCHLÜSSEL; creeper brake drum
-
61TRÄGER; planet and rear shaft
-
71NADELLAGER; BEARING, drive shaft needle
-
91KUGELLAGER 45 mm ID x 75 mm OD x 16 mm; BALL BEARING, drive shaft rear
-
101SPRENGRING; SNAP RING, drive shaft rear bearing
-
111DICHTUNG; drive shaft bearing cage
-
131KUGELLAGER 40 mm ID x 68 mm OD x 15 mm; drive shaft front
-
141RING; SNAP RING, drive shaft front bearing
-
151DICHTUNG; front bearing retainer
-
171OIL RESERVOIR; OIL SEAL, front bearing retainer
-
182KUPPLUNG 12T; shaft
-
201ENTLÜFTER; housing (order bushing, 112877 and plug, 110891H)
-
211DICHTUNG; anchor bolt cover
-
232SCHRAUBE 1/2'' - 13 x 4 5/8''; brake band anchor
-
2VENTILFEDER; PLUG, 1/2'' CI sq. socket pipe (optional with 116566 and 362356R3)
-
2STOPFEN; 1/2'' CI sq. socket pipe (optional with 103874 and 362356R3)
-
261KUGELLAGER 66.67mm ID x 104.76mm OD x 17.46mm W; sun gear brake shaft front
-
271SPRENGRING M66.67 x 3.23mm Thk, Ext; SNAP RING, sun gear and brake shaft front
-
281RING; O-RING, housing (7-1/8 x 7-17/32 x 13/64'')
-
291ÖLDICHTUNG; OIL SEAL, brake band actuating lever
-
301RING; SNAP RING, band actuating lever bushing
-
311BUCHSE; band actuating lever
-
321HEBEL; secondary brake band operating
-
331FEDERKEIL #7, 1/8'' x 3/4'', HT; Primary operating lever #7, 1/8'' x 3/4'', HT
-
341KUGELLAGER 75 mm ID x 115 mm OD x 20 mm; sun gear brake shaft rear
-
352GURT; W/THREE LININGS, brake (optional with 373304R91)
-
351BREMSE; BAND W/LINING ASSEMBLY, brake (optional with 359059R91)
-
371UNTERLEGSCHEIBE; SPACER, creeper brake drum
-
381TROMMEL; creeper brake (optional with 363906R1)
-
381TROMMEL; creeper brake (optional with 360172R1)
-
391DICHTUNG; housing cover
-
431KUGELLAGER 40 mm ID x 80 mm OD x 18 mm; rear shaft
-
441UNTERLEGSCHEIBE 38.89mm ID x 61.91mm OD x 1.52mm Thk; PLATE, rear shaft rear bearing nut lock
-
451MUTTER; rear shaft rear bearing
-
461DICHTUNG; rear shaft bearing retainer
-
471NABE; RETAINER ASSEMBLY, rear shaft bearing
-
481DICHTUNG; OIL SEAL, rear shaft bearing
-
491SCHILD; ASSEMBLY, safety (see note B)
-
3ACHSZAPFEN; BOLT, safety shield (see note B)
-
501ENTLÜFTER 1/8''-27 NPT, Short, w/washer; PLUG, vent
-
1ADAPTER 1/4'' NPT Male x 1/8'' NPT Fem; BUSHING, 1/4 x 1/8'' reducing pipe
Alle auswählen
Select
Ref.
Menge
3Verfügbarkeit
Teilenummer
17141R1Beschreibung
VERRIEGELUNGSSTIFT 5/32'' x 1'', SlottedImg
Select
Ref.
3Menge
1Verfügbarkeit
Teilenummer
360526R91Beschreibung
NADELLAGER Needle, 5mm ID x 2.38mm OD x 20.32mm WImg
Select
Ref.
9Menge
1Verfügbarkeit
Teilenummer
ST560Beschreibung
KUGELLAGER 45 mm ID x 75 mm OD x 16 mmImg
Select
Ref.
13Menge
1Verfügbarkeit
Teilenummer
ST559Beschreibung
KUGELLAGER 40 mm ID x 68 mm OD x 15 mmImg
Select
Ref.
23Menge
2Verfügbarkeit
Teilenummer
360175R1Beschreibung
SCHRAUBE 1/2'' - 13 x 4 5/8''Img
Select
Ref.
26Menge
1Verfügbarkeit
Teilenummer
ST564Beschreibung
KUGELLAGER 66.67mm ID x 104.76mm OD x 17.46mm WImg
Select
Ref.
27Menge
1Verfügbarkeit
Teilenummer
360171R1Beschreibung
SPRENGRING M66.67 x 3.23mm Thk, ExtImg
Select
Ref.
33Menge
1Verfügbarkeit
Teilenummer
124547Beschreibung
FEDERKEIL #7, 1/8'' x 3/4'', HTImg
Select
Ref.
34Menge
1Verfügbarkeit
Teilenummer
ST563Beschreibung
KUGELLAGER 75 mm ID x 115 mm OD x 20 mmImg
Select
Ref.
43Menge
1Verfügbarkeit
Teilenummer
ST239Beschreibung
KUGELLAGER 40 mm ID x 80 mm OD x 18 mmImg
Select
Ref.
44Menge
1Verfügbarkeit
Teilenummer
359081R1Beschreibung
UNTERLEGSCHEIBE 38.89mm ID x 61.91mm OD x 1.52mm ThkImg
Select
Ref.
50Menge
1Verfügbarkeit
Teilenummer
110891HBeschreibung
ENTLÜFTER 1/8''-27 NPT, Short, w/washerImg
Select
Ref.
Menge
1Verfügbarkeit
Teilenummer
112877Beschreibung
ADAPTER 1/4'' NPT Male x 1/8'' NPT FemImg