47631805 - Montagesatz Abblasvorrichtung für Motor - NEW HOLLAND AGRICULTURE
Part # 47631805
Der Montagesatz Abblasvorrichtung für Motor #47631805 verwendet schwenkbare Rohre, um in regelmäßigen Abständen Luftstöße um den Motor herum zu leiten und so die Staubablagerung zu reduzieren.
• Empfohlen für sehr trockene Bedingungen
• Erfordert einen Luftkompressor für den Motor
*Bei diesem Artikel handelt es sich um ein vom Händler installiertes Zubehör.
Package Weight:
- 41.0 kg
Package Length:
- 1580 mm
Package Width:
- 480 mm
Package Height:
- 370 mm
Package Quantity
- 1
Der Montagesatz Abblasvorrichtung für Motor #47631805 verwendet schwenkbare Rohre, um in regelmäßigen Abständen Luftstöße um den Motor herum zu leiten und so die Staubablagerung zu reduzieren.
• Empfohlen für sehr trockene Bedingungen
• Erfordert einen Luftkompressor für den Motor
*Bei diesem Artikel handelt es sich um ein vom Händler installiertes Zubehör.
This Kit includes the following parts:
-
Sechskantschraube - Vollgewinde - M8 x 16 mm L3
-
SCHRAUBE1
-
SCHRAUBE1
-
Sechskantschraube – Cl 8,8 – M10 x 501
-
Sechskantschraube - Cl 8.8 - Vollgewinde - M6 x 1 x 402
-
Sechskantschraube - Vollgewinde - M8 x 20 mm L8
-
STELLSCHRAUBE1
-
SCHRAUBE2
-
SICHERUNGSRING2
-
Sprengring - 51,6 mm AD x 1,75 mm Dicke2
-
PIN1
-
ARMATUR2
-
ELEKTROMOTOR1
-
Tellerfeder - 14 mm AD x 1,3 mm Dicke2
-
Tellersicherungsscheibe – M8 Bolzengröße x 18 mm AD x 1,4 mm Dicke20
-
LUFTEINLASSROHR1
-
LUFTEINLASSROHR1
-
PLATTE1
-
ADJUSTING PLATE1
-
PIPE FITTING4
-
PLUG1
-
FERRULE1
-
PIPE UNION NUT1
-
TUBE NUT1
-
SHIM2
-
Hex Lock Nut - M6 x 11
-
Deep Groove Ball Bearing - 20 mm ID x 42 mm OD x 12 mm W2
-
Hex Lock Nut - Cl 8.8 - M8 x 1.252
-
SNAP RING2
-
TUBE1
-
SUPPORT1
-
SUPPORT1
-
PLATE1
-
SEAL2
-
SEAL2
-
HYDRAULIC VALVE1
-
Pneumatic Filter - 190 mm L x 60 mm H x 60 mm W1
-
Cable Ball Joint - Zinc-Plated - 39 mm L x 19 mm W2
-
BELLEVILLE WASHER1
-
RACCORD1
-
RACCORD EN T3
-
Roulement à billes à gorge profonde - 6303 - 17 mm (DI) x 47 mm (DE) x 14 mm (l) 7278742
-
COLLIER2
-
Écrou hexagonal - Cl 10 - M8 x 1,256
-
COUDE1
-
BAGUE2
-
RACCORD2
-
PLAQUE1
-
GUIDE2
-
CARTER2
-
ADMISSION D'AIR1
-
TUBE1
-
TIGE FILETEE1
-
SUPPORT1
-
PLAQUE1
-
SUPPORT1
-
TUBE ADMISSION D'AIR1
-
SUPPORT1
-
Faisceau de câbles pour ventilateur de moteur1
-
SUPPORT1
-
ENTRETOISE2
-
Tuyau d'admission d'air1
-
ENTRETOISE2
-
RESSORT DE COMPRESS.2
-
Écrou hexagonal - M6 x 1.02
This Kit includes the following parts:
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Quantity3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Quantity3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Quantity3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Quantity3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Quantity3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Quantity3
This Kit includes the following parts:
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Quantity3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Quantity3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Quantity3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Quantity3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Quantity3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Quantity3
This Kit includes the following parts:
This Kit includes the following parts:
-
TypeKitPart NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
TypeKitPart NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
TypeKitPart NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
TypeKitPart NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
TypeKitPart NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
TypeKitPart NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.
There are no fitments for this product.
-
Model Name -
EQUIPMENT FITMENT -
Product Type -
Product Line
Check fitment and access technical drawings #47631805
Designed to guarantee top performance in all weather conditions, choose Alternator #84141452 for your tractor and harvesting equipment
High Power
- New generation able to supply high eleltrical demand
- optimal charging speed at all temperatures
Maintenance Free
- Superior design to ensure long lifespan with zero maintenance
High Power
- New generation able to supply high eleltrical demand
- optimal charging speed at all temperatures
Maintenance Free
- Superior design to ensure long lifespan with zero maintenance
Der Montagesatz Abblasvorrichtung für Motor #47631805 verwendet schwenkbare Rohre, um in regelmäßigen Abständen Luftstöße um den Motor herum zu leiten und so die Staubablagerung zu reduzieren.
• Empfohlen für sehr trockene Bedingungen
• Erfordert einen Luftkompressor für den Motor
*Bei diesem Artikel handelt es sich um ein vom Händler installiertes Zubehör.
Package Weight:
- 41.0 kg
Package Length:
- 1580 mm
Package Width:
- 480 mm
Package Height:
- 370 mm
Package Quantity
- 1
This Kit includes the following parts:
-
Lorem, ipsum dolor sit amet consectetur adipisicing elit.3
-
Lorem, ipsum dolor sit amet consectetur adipisicing elit.3
-
Lorem, ipsum dolor sit amet consectetur adipisicing elit.3
-
Lorem, ipsum dolor sit amet consectetur adipisicing elit.3
-
Lorem, ipsum dolor sit amet consectetur adipisicing elit.3
-
Lorem, ipsum dolor sit amet consectetur adipisicing elit.3
This Kit includes the following parts:
-
Part NumberDescriptionSechskantschraube - Vollgewinde - M8 x 16 mm L.Quantity3
-
Part NumberDescriptionSCHRAUBE.Quantity1
-
Part NumberDescriptionSCHRAUBE.Quantity1
-
Part NumberDescriptionSechskantschraube – Cl 8,8 – M10 x 50.Quantity1
-
Part NumberDescriptionSechskantschraube - Cl 8.8 - Vollgewinde - M6 x 1 x 40.Quantity2
-
Part NumberDescriptionSechskantschraube - Vollgewinde - M8 x 20 mm L.Quantity8
-
Part NumberDescriptionSTELLSCHRAUBE.Quantity1
-
Part NumberDescriptionSCHRAUBE.Quantity2
-
Part NumberDescriptionSICHERUNGSRING.Quantity2
-
Part NumberDescriptionSprengring - 51,6 mm AD x 1,75 mm Dicke.Quantity2
-
Part NumberDescriptionPIN.Quantity1
-
Part NumberDescriptionARMATUR.Quantity2
-
Part NumberDescriptionELEKTROMOTOR.Quantity1
-
Part NumberDescriptionTellerfeder - 14 mm AD x 1,3 mm Dicke.Quantity2
-
Part NumberDescriptionTellersicherungsscheibe – M8 Bolzengröße x 18 mm AD x 1,4 mm Dicke.Quantity20
-
Part NumberDescriptionLUFTEINLASSROHR.Quantity1
-
Part NumberDescriptionLUFTEINLASSROHR.Quantity1
-
Part NumberDescriptionPLATTE.Quantity1
-
Part NumberDescriptionADJUSTING PLATE.Quantity1
-
Part NumberDescriptionPIPE FITTING.Quantity4
-
Part NumberDescriptionPLUG.Quantity1
-
Part NumberDescriptionFERRULE.Quantity1
-
Part NumberDescriptionPIPE UNION NUT.Quantity1
-
Part NumberDescriptionTUBE NUT.Quantity1
-
Part NumberDescriptionSHIM.Quantity2
-
Part NumberDescriptionHex Lock Nut - M6 x 1.Quantity1
-
Part NumberDescriptionDeep Groove Ball Bearing - 20 mm ID x 42 mm OD x 12 mm W.Quantity2
-
Part NumberDescriptionHex Lock Nut - Cl 8.8 - M8 x 1.25.Quantity2
-
Part NumberDescriptionSNAP RING.Quantity2
-
Part NumberDescriptionTUBE.Quantity1
-
Part NumberDescriptionSUPPORT.Quantity1
-
Part NumberDescriptionSUPPORT.Quantity1
-
Part NumberDescriptionPLATE.Quantity1
-
Part NumberDescriptionSEAL.Quantity2
-
Part NumberDescriptionSEAL.Quantity2
-
Part NumberDescriptionHYDRAULIC VALVE.Quantity1
-
Part NumberDescriptionPneumatic Filter - 190 mm L x 60 mm H x 60 mm W.Quantity1
-
Part NumberDescriptionCable Ball Joint - Zinc-Plated - 39 mm L x 19 mm W.Quantity2
-
Part NumberDescriptionBELLEVILLE WASHER.Quantity1
-
Part NumberDescriptionRACCORD.Quantity1
-
Part NumberDescriptionRACCORD EN T.Quantity3
-
Part NumberDescriptionRoulement à billes à gorge profonde - 6303 - 17 mm (DI) x 47 mm (DE) x 14 mm (l) 727874.Quantity2
-
Part NumberDescriptionCOLLIER.Quantity2
-
Part NumberDescriptionÉcrou hexagonal - Cl 10 - M8 x 1,25.Quantity6
-
Part NumberDescriptionCOUDE.Quantity1
-
Part NumberDescriptionBAGUE.Quantity2
-
Part NumberDescriptionRACCORD.Quantity2
-
Part NumberDescriptionPLAQUE.Quantity1
-
Part NumberDescriptionGUIDE.Quantity2
-
Part NumberDescriptionCARTER.Quantity2
-
Part NumberDescriptionADMISSION D'AIR.Quantity1
-
Part NumberDescriptionTUBE.Quantity1
-
Part NumberDescriptionTIGE FILETEE.Quantity1
-
Part NumberDescriptionSUPPORT.Quantity1
-
Part NumberDescriptionPLAQUE.Quantity1
-
Part NumberDescriptionSUPPORT.Quantity1
-
Part NumberDescriptionTUBE ADMISSION D'AIR.Quantity1
-
Part NumberDescriptionSUPPORT.Quantity1
-
Part NumberDescriptionFaisceau de câbles pour ventilateur de moteur.Quantity1
-
Part NumberDescriptionSUPPORT.Quantity1
-
Part NumberDescriptionENTRETOISE.Quantity2
-
Part NumberDescriptionTuyau d'admission d'air.Quantity1
-
Part NumberDescriptionENTRETOISE.Quantity2
-
Part NumberDescriptionRESSORT DE COMPRESS..Quantity2
-
Part NumberDescriptionÉcrou hexagonal - M6 x 1.0.Quantity2
This Kit includes the following parts:
-
KitLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
KitLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
KitLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
KitLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
KitLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
KitLorem, ipsum dolor sit amet consectetur adipisicing elit.
This Kit includes the following parts: