-
1ASSALE; ASSEMBLY - front, GKN No. RP10.10H-10133-00307, Includes: Ref. 1 - 43;See Figure 6-56 for identification and service information.
-
1ALLOGGIAMENTO ASSALE; AXLE ASSEMBLY - rear, GKN No. RP10.10H-10133-00306, Includes: Ref. 1 - 43;See Figure 6-56 for identification and service information.
-
1ASSALE; ASSEMBLY - rear, GKN No. RP10.10-309, Includes: Ref. 1 - 43;See Figure 6-56 for identification and service information.
-
1ALLOGGIAMENTO ASSALE; AXLE ASSEMBLY - rear, GKN No. RP10.10-314, Includes: Ref. 1 - 43;See Figure 6-56 for identification and service information.
-
11ALLOGGIAMENTO; - axle
-
21SFIATO; - axle
-
31TAPPO; - housing
-
42MANDRINO; - rear axle original production, order N7769 kit
-
2KIT; - spindle, front or rear axle, Includes: Ref. 4 - 8
-
41MANDRINO; - front axle original production
-
51RONDELLA; THRUST WASHER - spindle
-
61MOLLA DELLA VALVOLA; RETAINING RING - spring
-
72ANELLO; - spring, Includes: Ref. 12A - 14
-
81DADO DI BLOCCAGGIO; - locking
-
914BULLONE Hex, M20 x 2.5 x 80mm, Cl 10.9; - hex, self-locking, 20 - 2.5 x 80 mm, class 10.9
-
1014RONDELLA; - flat
-
1114BULLONE Hex, M20 x 2.5 x 55mm, Cl 10.9; - hex, self-locking, 20 - 2.5 x 55 mm, class 10.9
-
122PARAOLIO; SEAL - spindle, one piece, 102 mm ID, if used
-
2MANICOTTO; KIT - seal, spindle, used with D77567 spindle, includes 8-30240 installation instructions, Includes: Ref. 12A - 14
-
1MANICOTTO; ASSEMBLY - wear
-
1FERMO GUARNIZIONI; SEAL ASSEMBLY - spindle, two piece, if used
-
12A1NON VENDUTO SEPARATA; OIL SEAL - spindle, 110 mm ID
-
131NON VENDUTO SEPARATA; RETAINER - oil seal
-
141NON VENDUTO SEPARATA; SLEEVE - wear
-
152SCODELLINO DEL CUSCI; CUP - bearing, inner
-
162CUSC. RULLINI CILINDRICI 3.375'' ID x 1.172''; BEARING - tapered roller
-
1720DADO; - lock
-
1820RONDELLA; - flat
-
1920PRIGIONIERO; - hub
-
202DISCO; - brake
-
212MOZZO; - wheel
-
2224PRIGIONIERO; BOLT - press in
-
2324DADO RUOTA; - hex
-
242CUSCINETTO; CUP - bearing, outer
-
252CUSCINETTO A RULLINI; BEARING - tapered roller
-
261ALBERO; - axle, left-hand front and right-hand rear, 39.724 inch (1009 mm) long
-
261ALBERO; - axle, right-hand front and left-hand rear, 42.008 inch (1067 mm) long
-
272INGRANAGGIO; SUN GEAR - planetary, used with L60900 and L78001 axles
-
272INGRANAGGIO, SOLE; - planetary, used with L113585 and L118130 axles;If items are ordered for L60900 and L78001 axles, Service Bulletin W06-85 must be consulted.
-
282ANELLO ELASTICO; SNAP RING - sun gear
-
292INGRANAGGIO; RING GEAR - planetary, used with L60900 and L78001 axles
-
292ANELLO GIREVOLE; RING GEAR - planetary, used with L113585 and L118130 axles;If items are ordered for L60900 and L78001 axles, Service Bulletin W06-85 must be consulted.
-
302INGRANAGGIO; HUB - ring gear, used with L60900 and L78001 axles
-
302RING, FLYWHEEL; HUB - ring gear, used with L113585 and L118130 axles;If items are ordered for L60900 and L78001 axles, Service Bulletin W06-85 must be consulted.
-
312ANELLO; SNAP RING - ring gear
-
322COPERCHIO; SPIDER - planetary
-
332TAPPO; BUTTON - thrust
-
346VITE DI FERMO M10 x 1.5 x 1.50mm, Gr 8.8; SET SCREW - spider
-
356ALBERO; - pinion
-
366ANELLO TOROIDALE 41.6 mm ID; - shaft seal
-
376PIGNONE; GEAR - planetary, used with L60900 and L78001 axles
-
376INGRANAGGIO; PINION GEAR - planetary, used with L113585 and L118130 axles;If items are ordered for L60900 and L78001 axles, Service Bulletin W06-85 must be consulted.
-
382TAPPO; - oil fill, spider
-
3946BULLONE Hex, M12 x 1.75 x 35mm, Cl 10.9; - hex, self-locking, 12 - 1.75 x 35 mm, class 10.9
-
4046RONDELLA; - flat, special
-
412BULLONE Hex, M14 x 2 x 35mm, Cl 10.9; - hex, self-locking, 14 - 2 x 35 mm, class 10.9, oil drain
-
422RONDELLA; - flat, special
-
432PIASTRA; PLATE - caliper mount
-
4424BULLONE Hex, 3/4'' - 10 x 2-1/2'', Gr 8; - hex, 3/4 NC x 2-1/2 inch, grade 8, brake caliper mounting to plate
-
4524RONDELLA; - flat, special
Ref.
Qtà
1Disponibilità
#Parte di ricambio
L60900Descrizione
ASSALE; ASSEMBLY - front, GKN No. RP10.10H-10133-00307, Includes: Ref. 1 - 43;See Figure 6-56 for identification and service information.Img
Alts
Ref.
Qtà
1Disponibilità
#Parte di ricambio
L78001Descrizione
ALLOGGIAMENTO ASSALE; AXLE ASSEMBLY - rear, GKN No. RP10.10H-10133-00306, Includes: Ref. 1 - 43;See Figure 6-56 for identification and service information.Img
Alts
Ref.
Qtà
1Disponibilità
#Parte di ricambio
L113585Descrizione
ASSALE; ASSEMBLY - rear, GKN No. RP10.10-309, Includes: Ref. 1 - 43;See Figure 6-56 for identification and service information.Img
Alts
Ref.
Qtà
1Disponibilità
#Parte di ricambio
L118130Descrizione
ALLOGGIAMENTO ASSALE; AXLE ASSEMBLY - rear, GKN No. RP10.10-314, Includes: Ref. 1 - 43;See Figure 6-56 for identification and service information.Img
Alts
Ref.
4Qtà
2Disponibilità
#Parte di ricambio
D77567Descrizione
MANDRINO; - rear axle original production, order N7769 kitImg
Alts
Ref.
Qtà
2Disponibilità
#Parte di ricambio
N7769Descrizione
KIT; - spindle, front or rear axle, Includes: Ref. 4 - 8Img
Alts
Ref.
4Qtà
1Disponibilità
#Parte di ricambio
N6813Descrizione
MANDRINO; - front axle original productionImg
Alts
Ref.
5Qtà
1Disponibilità
#Parte di ricambio
D77572Descrizione
RONDELLA; THRUST WASHER - spindleImg
Alts
Ref.
6Qtà
1Disponibilità
#Parte di ricambio
D77571Descrizione
MOLLA DELLA VALVOLA; RETAINING RING - springImg
Alts
Ref.
7Qtà
2Disponibilità
#Parte di ricambio
D77570Descrizione
ANELLO; - spring, Includes: Ref. 12A - 14Img
Alts
Ref.
8Qtà
1Disponibilità
#Parte di ricambio
D77568Descrizione
DADO DI BLOCCAGGIO; - lockingImg
Alts
Ref.
9Qtà
14Disponibilità
#Parte di ricambio
514-1203Descrizione
BULLONE Hex, M20 x 2.5 x 80mm, Cl 10.9; - hex, self-locking, 20 - 2.5 x 80 mm, class 10.9Img
Alts
Ref.
11Qtà
14Disponibilità
#Parte di ricambio
514-1202Descrizione
BULLONE Hex, M20 x 2.5 x 55mm, Cl 10.9; - hex, self-locking, 20 - 2.5 x 55 mm, class 10.9Img
Alts
Ref.
12Qtà
2Disponibilità
#Parte di ricambio
D80561Descrizione
PARAOLIO; SEAL - spindle, one piece, 102 mm ID, if usedImg
Alts
Ref.
Qtà
2Disponibilità
#Parte di ricambio
L36208Descrizione
MANICOTTO; KIT - seal, spindle, used with D77567 spindle, includes 8-30240 installation instructions, Includes: Ref. 12A - 14Img
Alts
Ref.
Qtà
1Disponibilità
#Parte di ricambio
N6593Descrizione
FERMO GUARNIZIONI; SEAL ASSEMBLY - spindle, two piece, if usedImg
Alts
Ref.
12AQtà
1Disponibilità
#Parte di ricambio
NSSDescrizione
NON VENDUTO SEPARATA; OIL SEAL - spindle, 110 mm IDImg
Alts
Ref.
13Qtà
1Disponibilità
#Parte di ricambio
NSSDescrizione
NON VENDUTO SEPARATA; RETAINER - oil sealImg
Alts
Ref.
14Qtà
1Disponibilità
#Parte di ricambio
NSSDescrizione
NON VENDUTO SEPARATA; SLEEVE - wearImg
Alts
Ref.
15Qtà
2Disponibilità
#Parte di ricambio
A7892Descrizione
SCODELLINO DEL CUSCI; CUP - bearing, innerImg
Alts
Ref.
16Qtà
2Disponibilità
#Parte di ricambio
A7893Descrizione
CUSC. RULLINI CILINDRICI 3.375'' ID x 1.172''; BEARING - tapered rollerImg
Alts
Ref.
22Qtà
24Disponibilità
#Parte di ricambio
D80560Descrizione
PRIGIONIERO; BOLT - press inImg
Alts
Ref.
24Qtà
2Disponibilità
#Parte di ricambio
64371HDescrizione
CUSCINETTO; CUP - bearing, outerImg
Alts
Ref.
25Qtà
2Disponibilità
#Parte di ricambio
A14984Descrizione
CUSCINETTO A RULLINI; BEARING - tapered rollerImg
Alts
Ref.
26Qtà
1Disponibilità
#Parte di ricambio
D74465Descrizione
ALBERO; - axle, left-hand front and right-hand rear, 39.724 inch (1009 mm) longImg
Alts
Ref.
26Qtà
1Disponibilità
#Parte di ricambio
D74466Descrizione
ALBERO; - axle, right-hand front and left-hand rear, 42.008 inch (1067 mm) longImg
Alts
Ref.
27Qtà
2Disponibilità
#Parte di ricambio
D74464Descrizione
INGRANAGGIO; SUN GEAR - planetary, used with L60900 and L78001 axlesImg
Alts
Ref.
27Qtà
2Disponibilità
#Parte di ricambio
N9839Descrizione
INGRANAGGIO, SOLE; - planetary, used with L113585 and L118130 axles;If items are ordered for L60900 and L78001 axles, Service Bulletin W06-85 must be consulted.Img
Alts
Ref.
28Qtà
2Disponibilità
#Parte di ricambio
K12922Descrizione
ANELLO ELASTICO; SNAP RING - sun gearImg
Alts
Ref.
29Qtà
2Disponibilità
#Parte di ricambio
D74454Descrizione
INGRANAGGIO; RING GEAR - planetary, used with L60900 and L78001 axlesImg
Alts
Ref.
29Qtà
2Disponibilità
#Parte di ricambio
N9835Descrizione
ANELLO GIREVOLE; RING GEAR - planetary, used with L113585 and L118130 axles;If items are ordered for L60900 and L78001 axles, Service Bulletin W06-85 must be consulted.Img
Alts
Ref.
30Qtà
2Disponibilità
#Parte di ricambio
D77569Descrizione
INGRANAGGIO; HUB - ring gear, used with L60900 and L78001 axlesImg
Alts
Ref.
30Qtà
2Disponibilità
#Parte di ricambio
N9841Descrizione
RING, FLYWHEEL; HUB - ring gear, used with L113585 and L118130 axles;If items are ordered for L60900 and L78001 axles, Service Bulletin W06-85 must be consulted.Img
Alts
Ref.
31Qtà
2Disponibilità
#Parte di ricambio
D74456Descrizione
ANELLO; SNAP RING - ring gearImg
Alts
Ref.
32Qtà
2Disponibilità
#Parte di ricambio
D74451Descrizione
COPERCHIO; SPIDER - planetaryImg
Alts
Ref.
34Qtà
6Disponibilità
#Parte di ricambio
D74502Descrizione
VITE DI FERMO M10 x 1.5 x 1.50mm, Gr 8.8; SET SCREW - spiderImg
Alts
Ref.
36Qtà
6Disponibilità
#Parte di ricambio
D80559Descrizione
ANELLO TOROIDALE 41.6 mm ID; - shaft sealImg
Alts
Ref.
37Qtà
6Disponibilità
#Parte di ricambio
D74452Descrizione
PIGNONE; GEAR - planetary, used with L60900 and L78001 axlesImg
Alts
Ref.
37Qtà
6Disponibilità
#Parte di ricambio
N9837Descrizione
INGRANAGGIO; PINION GEAR - planetary, used with L113585 and L118130 axles;If items are ordered for L60900 and L78001 axles, Service Bulletin W06-85 must be consulted.Img
Alts
Ref.
38Qtà
2Disponibilità
#Parte di ricambio
D74516Descrizione
TAPPO; - oil fill, spiderImg
Alts
Ref.
39Qtà
46Disponibilità
#Parte di ricambio
514-806Descrizione
BULLONE Hex, M12 x 1.75 x 35mm, Cl 10.9; - hex, self-locking, 12 - 1.75 x 35 mm, class 10.9Img
Alts
Ref.
40Qtà
46Disponibilità
#Parte di ricambio
D74508Descrizione
RONDELLA; - flat, specialImg
Alts
Ref.
41Qtà
2Disponibilità
#Parte di ricambio
514-901Descrizione
BULLONE Hex, M14 x 2 x 35mm, Cl 10.9; - hex, self-locking, 14 - 2 x 35 mm, class 10.9, oil drainImg
Alts
Ref.
42Qtà
2Disponibilità
#Parte di ricambio
D74509Descrizione
RONDELLA; - flat, specialImg
Alts
Ref.
43Qtà
2Disponibilità
#Parte di ricambio
D74463Descrizione
PIASTRA; PLATE - caliper mountImg
Alts
Ref.
44Qtà
24Disponibilità
#Parte di ricambio
26-1240Descrizione
BULLONE Hex, 3/4'' - 10 x 2-1/2'', Gr 8; - hex, 3/4 NC x 2-1/2 inch, grade 8, brake caliper mounting to plateImg
Alts
Ref.
45Qtà
24Disponibilità
#Parte di ricambio
L79179Descrizione
RONDELLA; - flat, specialImg
Alts