TABLE OF CONTENTS
DIAGRAM
PART LIST
Clear callout
Select All
Ref.
Qty
Part #
Alts
Description
Image
-
1X; TRANSMISSION AND DIFFERENTIAL - complete (Used on tractor serial #3018001) when stock is exhausted, order D29500, Includes: Ref. 1 - 67
-
1X; TRANSMISSION AND DIFFERENTIAL - complete (Used on tractor serial #3018001 and after) see D23400, Includes: Ref. 1 - 67
-
11BALL BEARING; CASE - transmission (Includes ref #26) D23400 transmission (Has recess in faced surface) when stock is exhausted order D29527 (See 32369 D27642 and D29309)
-
21PLUG Sq Hd, 1''-11 1/2 NPTF; - pipe transmission filler (1'' NPT square head)
-
31X; PLUG - pipe oil level (1/2'' NPT extended square head)
-
42X; PLUG - pipe magnetic (Drain)
-
51CUP ASSY.; CUP - oil main shaft rear bearing
-
61TAPERED BEARING; RING snap - main shaft rear bearing
-
71CUP; - bearing
-
81X; CONE - bearing
-
91PINION; GEAR - main shaft low and reverse
-
101NO LONGER SERVICED; - main shaft gear
-
111GEAR; - main shaft second speed
-
121GEAR; - main shaft constant mesh
-
131X; RING - snap, main shaft front bearing
-
141X; CONE - bearing
-
151CUP; - bearing
-
161MAIN SHAFT;
-
171GASKET; - main shaft front bearing cap
-
18UARSHIM; - main shaft front bearing cap (.005'' thick)
-
19UARSHIM; - main shaft front bearing cap (.010'' thick)
-
UARSHIM .020'' Thk; Main shaft front bearing cap (Not shown) .020'' Thk
-
201X; CAP - main shaft front bearing, Includes: Ref. 21
-
211RESERVOIR; SEAL - oil bearing cap
-
223CAP; HHCS AND LOCKWASHER - 3/8'' - 16 NC x 1''
-
231GEAR; COUNTERSHAFT AND BEVEL - (Included with differential)
-
241BEARING, ROLLER, CYL; CONE
-
251BEARING ASSY; CUP
-
261SNAP RING; RING snap - countershaft rear bearing
-
271BALL BEARING; - countershaft first and reverse
-
281GEAR; - sliding second and third
-
281DISC; - sliding second and third
-
291GEAR; AND BUSHING - third, Includes: Ref. 30
-
301BUSHING; - countershaft third gear
-
311SNAP RING #250, 2.673'', Int; RING snap - countershaft front bearing
-
321BELLEVILLE WASHER; - retaining countershaft third gear
-
331X; WASHER - spring countershaft third gear retaining (Use D11205)
-
1SHIM KIT; KIT - pack countershaft third gear retaining
-
1SPACER; WASHER - hardened (1-1/32'' I.D. x 1-7/16 O.D. x 3/64'' thick)
-
2SHIM .004'' Thk; Steel (Not shown) .004'' Thk
-
2SHIM .007'' Thk; Steel (Not shown) .007'' Thk
-
5SHIM .010'' Thk; Steel (Not shown) .010'' Thk
-
341CUP; - bearing
-
351CUP ASSY.; CONE - bearing
-
361NUT; - adjusting countershaft front bearing
-
371GASKET; - countershaft front bearing cap
-
381CAP; - countershaft front bearing
-
393X; HHCS AND LOCKWASHER - bearing cap
-
401SHAFT; ASSY - reverse idler, Includes: Ref. 41
-
411X; PLUG - pipe slotted headless
-
421LOCK; LOCK - reverse idler shaft
-
431BOLT Hex, 3/8'' - 16 x 5/8'', Gr 5, Full Thd; Reverse idler shaft lock Hex, 3/8''-16 x 5/8'', G5, Full Thd
-
441LOCK WASHER Ext Tooth, 0.391'' ID x 0.682'' OD, STL, PLN; WASHER - Shakeproof lock internal tooth (3/8'')
-
452TAPERED BEARING; BEARING - needle reverse idler
-
461GEAR; - reverse idler
-
46A2WASHER; - thrust, reverse idler gear (D29500 transmission only)
-
471LEVER; - gear shift
-
481X; KNOB - gear shift lever
-
491X; COVER - dust gear shift lever
-
501PIN; - stake gear shift lever
-
511SNAP RING; RING snap - gear shift lever
-
531GUIDE; GUIDE - control, Includes: Ref. 54 and 55
-
541PLATE; - guide control cover
-
552RIVET But Hd, 1/4'' x 7/8''; - button head guide plate to control cover (1/4'' x 7/8'')
-
561GASKET; - control cover
-
574BOLT Hex, 3/8'' - 16 x 7/8'', Gr 5, Full Thd;
-
584LOCK WASHER 3/8''; med. sec. 3/8''
-
591ROD; - shift first and reverse
-
605WASHER; - spacer first and reverse shift fork
-
611PIN; - lock first and reverse shift rod (short)
-
621FORK TEDDER; FORK - shift first and reverse
-
632SPRING; - mesh lock shift fork
-
642X; BALL - mesh lock shift fork (3/8'' dia.) use 211-11
-
2BALL 3/8'' Dia; - mesh lock shift fork (.) 3/8'' Dia
-
651ROD; - shift second and third
-
661PIN; - lock second and third shift rod (Long)
-
671NO LONGER SERVICED; FORK - shift second and third
-
684BOLT Hex, 9/16'' - 12 x 1'', Gr 5; HHCS - 9/16'' - 12 NC x 1
-
691GASKET; - transmission cover plate
-
701PLATE; - cover transmission
-
7111BOLT Hex, 7/16'' - 14 x 1-1/4'', Gr 5, Full Thd;
-
7211LOCK WASHER 7/16''; med. sect., used up to tractor S/N 3017412 (Use Loctite Grade CV ) 7/16'';When reassembling transmission cover plate on tractors prior to serial number 3017412, discard lockwasheres and apply LOCTITE ''Grade CV'' to mounting bolts, also on Models serial number 3017412 and after, be sure to apply LOCTITE to cover plate mounting volts before installing.
-
732SEAL; - cork final drive spacer to transmission case (Used with transmission case that has recess in faced surface and any spacer tubes with or without ''o'' ring groove) see D27642 and D29309
-
73A2X; SEAL - ''o'' ring final drive spacer to transmission case (Used with transmission case that has solid faced surface and spacer tube with ''o'' ring groove) see D32369 and D29309
-
73B2GASKET; - final drive spacer to transmission case (Used with transmission case that has solid faced surface and spacer tube without ''o'' ring groove) see 23269 and D27642
-
741NO LONGER SERVICED; SPACER - final drive R.H. (Standard 48'' gauge tractor) has plain faced surface on transmission side (Original equipment on tractors up to serial number 3017316) when stock is exhausted, for Drawbar Models order 1-D29728, 4-14-1228, 4-92-12, and 4-25-1112
-
741ACCUMULATOR; SPACER - final drive R.H. (42'' gauge tractor) has plain faced surface on transmission side (Original equipment on tractors up to serial number 3018001) when stock is exhausted, order 1 - D29788, 4 - 14-1228, 4 - 92-12, and 4 - 25-1112
-
741DRIVER SEAT; SPACER - final drive R H. (42'' gauge tractor) has plain faced surface on transmission side (Original equipment on tractors serial number 3018001 and after) see 11977
-
741PLATE; SPACER - final drive R.H. (60'' gauge tractor) has plain faced surface on transmission side (Original equipment on tractors up to serial number 3018001) when stock is exhausted, order 1 - D29792, 4 - 14-1228, 4 - 92-12, and 4 - 25-1112
-
741X; SPACER - final drive R H (60'' gauge tractor) has plain faced surface on transmission side (Original equipment on tractors serial number 3018001 and after) see 11970
-
741O-RING; SPACER - final drive R.H. (72'' gauge tractor) has plain faced surface on transmission side (Original equipment on tractors up to serial number 3018001) when stock is exhausted, order 1 - D29794, 4 - 14-1228, 4 - 92-12, and 4 - 25-1112
-
741X; SPACER - final drive R.H. (72'' gauge tractor) has plain faced surface on transmission side (Original equipment on tractors serial number 3018001 and after) see 11974
-
751NO LONGER SERVICED; SPACER - final drive L.H. (Standard 48'' gauge tractor) has plain faced surface on transmission side (Original equip.on tractors up to ser. no. 3017316) when stock is exhausted, for Drawbar Models order 1-D29729, 4-14-1228, 4-92-12, 4-25-1112
-
751ROLLER; SPACER - final drive L.H (36'' gauge tractor) has plain faced surface on transmission side
-
751PULLER; SPACER - final drive L.H. (42'' gauge tractor) has plain faced surface on transmission side (Original equipment on tractors up to serial number 3018001) when stock is exhausted, order 1 - D29729, 4 - 14-1228, 4 - 92-12, and 4 - 25-1112)
-
751O-RING; SPACER - final drive L.H. (60'' gauge tractor) has plain faced surface on transmission side (Original equipment on tractors up to serial number 3018001) when stock is exhausted, order 1 - D29793, 4 - 14-1228, 4 - 92-12, and 4 - 25-1112
-
751SPACER; - final drive L.H. (60'' gauge tractor) has plain faced surface on transmission side (Original equipment on tractors serial #3018001 and after)
-
751FITTING; SPACER - final drive L.H. (72'' gauge tractor) has plain faced surface on transmission side (Original equipment on tractorsup to serial number 3018001) when stock is exhausted, order 1 - D29795, 4 - 14-1228, 4 - 92-12, and 4 - 25-1112
-
751X; SPACER - final drive L.H. (72'' gauge tractor) has plain faced surface on transmission side (Original equipment on tractors serial number 3018001 and after) See 11975
-
7612STUD; STD - final drive spacer to transmission (9/16'' x 1'')
-
7712LOCK NUT 9/16''-18, GB; NUT - lock, (9/16'' - 18 NF)
-
788BOLT Hex, 5/8'' - 18 x 1-3/4'', Gr 5; (Used up to tractor S/N 3018001) see 14-1228 Hex, 5/8''-18 x 1 3/4'', G5
-
8BOLT Hex, 3/4'' - 16 x 1-3/4'', Gr 5; HHCS - 3/4'' - 16 NF x 1-3/4'' (Used on tractor serial #3018001 and after) see 14-1028
-
798LOCK WASHER 5/8''; WASHER, LOCK, 5/8''
-
8LOCK WASHER 3/4''; WASHER, LOCK, 3/4''
-
808NUT 5/8''-18, G5; - hex (5/8'' - 18 NF)
-
8NUT 3/4''-16, G5; - hex (3/4'' - 16 NF)
-
812X; SEAL - ''o'' ring final drive spacer outer flange
Select All
Ref.
Qty
1Availability
Part #
D23400Description
X; TRANSMISSION AND DIFFERENTIAL - complete (Used on tractor serial #3018001) when stock is exhausted, order D29500, Includes: Ref. 1 - 67Img
Alts
Ref.
Qty
1Availability
Part #
D29500Description
X; TRANSMISSION AND DIFFERENTIAL - complete (Used on tractor serial #3018001 and after) see D23400, Includes: Ref. 1 - 67Img
Alts
Ref.
1Qty
1Availability
Part #
11361Description
BALL BEARING; CASE - transmission (Includes ref #26) D23400 transmission (Has recess in faced surface) when stock is exhausted order D29527 (See 32369 D27642 and D29309)Img
Alts
Ref.
2Qty
1Availability
Part #
221-16Description
PLUG Sq Hd, 1''-11 1/2 NPTF; - pipe transmission filler (1'' NPT square head)Img
Alts
Ref.
3Qty
1Availability
Part #
221-834Description
X; PLUG - pipe oil level (1/2'' NPT extended square head)Img
Alts
Ref.
5Qty
1Availability
Part #
11371Description
CUP ASSY.; CUP - oil main shaft rear bearingImg
Alts
Ref.
6Qty
1Availability
Part #
11453Description
TAPERED BEARING; RING snap - main shaft rear bearingImg
Alts
Ref.
9Qty
1Availability
Part #
CAS11363Description
PINION; GEAR - main shaft low and reverseImg
Alts
Ref.
13Qty
1Availability
Part #
VT2111Description
X; RING - snap, main shaft front bearingImg
Alts
Ref.
17Qty
1Availability
Part #
51200023Description
GASKET; - main shaft front bearing capImg
Alts
Ref.
18Qty
UARAvailability
Part #
11368Description
SHIM; - main shaft front bearing cap (.005'' thick)Img
Alts
Ref.
19Qty
UARAvailability
Part #
11367Description
SHIM; - main shaft front bearing cap (.010'' thick)Img
Alts
Ref.
Qty
UARAvailability
Part #
D20541Description
SHIM .020'' Thk; Main shaft front bearing cap (Not shown) .020'' ThkImg
Alts
Ref.
20Qty
1Availability
Part #
11369Description
X; CAP - main shaft front bearing, Includes: Ref. 21Img
Alts
Ref.
22Qty
3Availability
Part #
23016Description
CAP; HHCS AND LOCKWASHER - 3/8'' - 16 NC x 1''Img
Alts
Ref.
23Qty
1Availability
Part #
R25584Description
GEAR; COUNTERSHAFT AND BEVEL - (Included with differential)Img
Alts
Ref.
26Qty
1Availability
Part #
11451Description
SNAP RING; RING snap - countershaft rear bearingImg
Alts
Ref.
27Qty
1Availability
Part #
11373Description
BALL BEARING; - countershaft first and reverseImg
Alts
Ref.
29Qty
1Availability
Part #
11375Description
GEAR; AND BUSHING - third, Includes: Ref. 30Img
Alts
Ref.
31Qty
1Availability
Part #
101-21250Description
SNAP RING #250, 2.673'', Int; RING snap - countershaft front bearingImg
Alts
Ref.
32Qty
1Availability
Part #
11378Description
BELLEVILLE WASHER; - retaining countershaft third gearImg
Alts
Ref.
33Qty
1Availability
Part #
11377Description
X; WASHER - spring countershaft third gear retaining (Use D11205)Img
Alts
Ref.
Qty
1Availability
Part #
D11205Description
SHIM KIT; KIT - pack countershaft third gear retainingImg
Alts
Ref.
Qty
1Availability
Part #
D27621Description
SPACER; WASHER - hardened (1-1/32'' I.D. x 1-7/16 O.D. x 3/64'' thick)Img
Alts
Ref.
Qty
2Availability
Part #
D27618Description
SHIM .004'' Thk; Steel (Not shown) .004'' ThkImg
Alts
Ref.
Qty
2Availability
Part #
D27619Description
SHIM .007'' Thk; Steel (Not shown) .007'' ThkImg
Alts
Ref.
Qty
5Availability
Part #
D27620Description
SHIM .010'' Thk; Steel (Not shown) .010'' ThkImg
Alts
Ref.
36Qty
1Availability
Part #
11380Description
NUT; - adjusting countershaft front bearingImg
Alts
Ref.
37Qty
1Availability
Part #
51200023Description
GASKET; - countershaft front bearing capImg
Alts
Ref.
40Qty
1Availability
Part #
34592Description
SHAFT; ASSY - reverse idler, Includes: Ref. 41Img
Alts
Ref.
43Qty
1Availability
Part #
13-610Description
BOLT Hex, 3/8'' - 16 x 5/8'', Gr 5, Full Thd; Reverse idler shaft lock Hex, 3/8''-16 x 5/8'', G5, Full ThdImg
Alts
Ref.
44Qty
1Availability
Part #
193-10Description
LOCK WASHER Ext Tooth, 0.391'' ID x 0.682'' OD, STL, PLN; WASHER - Shakeproof lock internal tooth (3/8'')Img
Alts
Ref.
45Qty
2Availability
Part #
11450Description
TAPERED BEARING; BEARING - needle reverse idlerImg
Alts
Ref.
46AQty
2Availability
Part #
D29626Description
WASHER; - thrust, reverse idler gear (D29500 transmission only)Img
Alts
Ref.
51Qty
1Availability
Part #
CAS11454Description
SNAP RING; RING snap - gear shift leverImg
Alts
Ref.
53Qty
1Availability
Part #
37911Description
GUIDE; GUIDE - control, Includes: Ref. 54 and 55Img
Alts
Ref.
55Qty
2Availability
Part #
45-414Description
RIVET But Hd, 1/4'' x 7/8''; - button head guide plate to control cover (1/4'' x 7/8'')Img
Alts
Ref.
57Qty
4Availability
Part #
13-614Description
BOLT Hex, 3/8'' - 16 x 7/8'', Gr 5, Full Thd;Img
Alts
Ref.
60Qty
5Availability
Part #
D28299Description
WASHER; - spacer first and reverse shift forkImg
Alts
Ref.
61Qty
1Availability
Part #
11398Description
PIN; - lock first and reverse shift rod (short)Img
Alts
Ref.
62Qty
1Availability
Part #
11400Description
FORK TEDDER; FORK - shift first and reverseImg
Alts
Ref.
64Qty
2Availability
Part #
VT4913Description
X; BALL - mesh lock shift fork (3/8'' dia.) use 211-11Img
Alts
Ref.
Qty
2Availability
Part #
211-11Description
BALL 3/8'' Dia; - mesh lock shift fork (.) 3/8'' DiaImg
Alts
Ref.
66Qty
1Availability
Part #
11399Description
PIN; - lock second and third shift rod (Long)Img
Alts
Ref.
67Qty
1Availability
Part #
NLSDescription
NO LONGER SERVICED; FORK - shift second and thirdImg
Alts
Ref.
68Qty
4Availability
Part #
13-916Description
BOLT Hex, 9/16'' - 12 x 1'', Gr 5; HHCS - 9/16'' - 12 NC x 1Img
Alts
Ref.
71Qty
11Availability
Part #
13-720Description
BOLT Hex, 7/16'' - 14 x 1-1/4'', Gr 5, Full Thd;Img
Alts
Ref.
72Qty
11Availability
Part #
92-7Description
LOCK WASHER 7/16''; med. sect., used up to tractor S/N 3017412 (Use Loctite Grade CV ) 7/16'';When reassembling transmission cover plate on tractors prior to serial number 3017412, discard lockwasheres and apply LOCTITE ''Grade CV'' to mounting bolts, also on Models serial number 3017412 and after, be sure to apply LOCTITE to cover plate mounting volts before installing.Img
Alts
Ref.
73Qty
2Availability
Part #
32369Description
SEAL; - cork final drive spacer to transmission case (Used with transmission case that has recess in faced surface and any spacer tubes with or without ''o'' ring groove) see D27642 and D29309Img
Alts
Ref.
73AQty
2Availability
Part #
D27642Description
X; SEAL - ''o'' ring final drive spacer to transmission case (Used with transmission case that has solid faced surface and spacer tube with ''o'' ring groove) see D32369 and D29309Img
Alts
Ref.
73BQty
2Availability
Part #
D29309Description
GASKET; - final drive spacer to transmission case (Used with transmission case that has solid faced surface and spacer tube without ''o'' ring groove) see 23269 and D27642Img
Alts
Ref.
74Qty
1Availability
Part #
NLSDescription
NO LONGER SERVICED; SPACER - final drive R.H. (Standard 48'' gauge tractor) has plain faced surface on transmission side (Original equipment on tractors up to serial number 3017316) when stock is exhausted, for Drawbar Models order 1-D29728, 4-14-1228, 4-92-12, and 4-25-1112Img
Alts
Ref.
74Qty
1Availability
Part #
11977Description
ACCUMULATOR; SPACER - final drive R.H. (42'' gauge tractor) has plain faced surface on transmission side (Original equipment on tractors up to serial number 3018001) when stock is exhausted, order 1 - D29788, 4 - 14-1228, 4 - 92-12, and 4 - 25-1112Img
Alts
Ref.
74Qty
1Availability
Part #
D29788Description
DRIVER SEAT; SPACER - final drive R H. (42'' gauge tractor) has plain faced surface on transmission side (Original equipment on tractors serial number 3018001 and after) see 11977Img
Alts
Ref.
74Qty
1Availability
Part #
11970Description
PLATE; SPACER - final drive R.H. (60'' gauge tractor) has plain faced surface on transmission side (Original equipment on tractors up to serial number 3018001) when stock is exhausted, order 1 - D29792, 4 - 14-1228, 4 - 92-12, and 4 - 25-1112Img
Alts
Ref.
74Qty
1Availability
Part #
D29792Description
X; SPACER - final drive R H (60'' gauge tractor) has plain faced surface on transmission side (Original equipment on tractors serial number 3018001 and after) see 11970Img
Alts
Ref.
74Qty
1Availability
Part #
11974Description
O-RING; SPACER - final drive R.H. (72'' gauge tractor) has plain faced surface on transmission side (Original equipment on tractors up to serial number 3018001) when stock is exhausted, order 1 - D29794, 4 - 14-1228, 4 - 92-12, and 4 - 25-1112Img
Alts
Ref.
74Qty
1Availability
Part #
D29794Description
X; SPACER - final drive R.H. (72'' gauge tractor) has plain faced surface on transmission side (Original equipment on tractors serial number 3018001 and after) see 11974Img
Alts
Ref.
75Qty
1Availability
Part #
NLSDescription
NO LONGER SERVICED; SPACER - final drive L.H. (Standard 48'' gauge tractor) has plain faced surface on transmission side (Original equip.on tractors up to ser. no. 3017316) when stock is exhausted, for Drawbar Models order 1-D29729, 4-14-1228, 4-92-12, 4-25-1112Img
Alts
Ref.
75Qty
1Availability
Part #
32659Description
ROLLER; SPACER - final drive L.H (36'' gauge tractor) has plain faced surface on transmission sideImg
Alts
Ref.
75Qty
1Availability
Part #
11978Description
PULLER; SPACER - final drive L.H. (42'' gauge tractor) has plain faced surface on transmission side (Original equipment on tractors up to serial number 3018001) when stock is exhausted, order 1 - D29729, 4 - 14-1228, 4 - 92-12, and 4 - 25-1112)Img
Alts
Ref.
75Qty
1Availability
Part #
11971Description
O-RING; SPACER - final drive L.H. (60'' gauge tractor) has plain faced surface on transmission side (Original equipment on tractors up to serial number 3018001) when stock is exhausted, order 1 - D29793, 4 - 14-1228, 4 - 92-12, and 4 - 25-1112Img
Alts
Ref.
75Qty
1Availability
Part #
D29793Description
SPACER; - final drive L.H. (60'' gauge tractor) has plain faced surface on transmission side (Original equipment on tractors serial #3018001 and after)Img
Alts
Ref.
75Qty
1Availability
Part #
11975Description
FITTING; SPACER - final drive L.H. (72'' gauge tractor) has plain faced surface on transmission side (Original equipment on tractorsup to serial number 3018001) when stock is exhausted, order 1 - D29795, 4 - 14-1228, 4 - 92-12, and 4 - 25-1112Img
Alts
Ref.
75Qty
1Availability
Part #
D29795Description
X; SPACER - final drive L.H. (72'' gauge tractor) has plain faced surface on transmission side (Original equipment on tractors serial number 3018001 and after) See 11975Img
Alts
Ref.
76Qty
12Availability
Part #
46505Description
STUD; STD - final drive spacer to transmission (9/16'' x 1'')Img
Alts
Ref.
77Qty
12Availability
Part #
131-675Description
LOCK NUT 9/16''-18, GB; NUT - lock, (9/16'' - 18 NF)Img
Alts
Ref.
78Qty
8Availability
Part #
14-1028Description
BOLT Hex, 5/8'' - 18 x 1-3/4'', Gr 5; (Used up to tractor S/N 3018001) see 14-1228 Hex, 5/8''-18 x 1 3/4'', G5Img
Alts
Ref.
Qty
8Availability
Part #
14-1228Description
BOLT Hex, 3/4'' - 16 x 1-3/4'', Gr 5; HHCS - 3/4'' - 16 NF x 1-3/4'' (Used on tractor serial #3018001 and after) see 14-1028Img
Alts
Ref.
80Qty
8Availability
Part #
25-1110Description
NUT 5/8''-18, G5; - hex (5/8'' - 18 NF)Img
Alts
Ref.
81Qty
2Availability
Part #
O8849ABDescription
X; SEAL - ''o'' ring final drive spacer outer flangeImg
Alts