-
21PINION; crankshaft, 33 teeth
-
31DRIVING SPROCKET; 1/4 x 3/4 Woodruff 91, crankshaft pinion
-
41WOODRUFF KEY #91, 1/4'' x 3/4'', HT; 1/4 x 3/4 Woodruff 91, fan drive pulley
-
51PULLEY; fan drive
-
61BACK-UP RING; 1-14 hex, jam, crankshaft, for tractors equipped with front PTO
-
71NUT 1''-14, Thin; crankshaft, used on tractors with starting crank
-
81CRANK; ASSY, starting, international tractors equipped with starting crank
-
102BEARING SET; BEARING ASSEMBLY, crankshaft front and center, 2 halves, standard
-
102KIT; BEARING ASSEMBLY, crankshaft front and center, 2 halves, .002 undersize
-
102KIT; BEARING ASSEMBLY, crankshaft front and center, 2 halves, .010 undersize
-
102BEARING ASSY; ASSEMBLY, crankshaft front and center, 2 halves, .020 undersize
-
102CRANKSHAFT BEARING; BEARING ASSEMBLY, crankshaft front and center, 2 halves, .030 undersize
-
111BEARING SET; BEARING ASSEMBLY, crankshaft rear, 2 halves, standard
-
111BEARING ASSY; BEARING ASSEMBLY, crankshaft rear, 2 halves, .002 undersize
-
111BEARING ASSY; ASSEMBLY, crankshaft rear, 2 halves, .010 undersize
-
111BEARING ASSY; BEARING ASSEMBLY, crankshaft rear, 2 halves, .020 undersize
-
111BEARING ASSY; BEARING ASSEMBLY, crankshaft rear, 2 halves, .030 undersize
-
121PIN; flywheel dowel
-
131FLYWHEEL; W/RING GEAR
-
141GEAR; flywheel ring, 134 teeth
-
154BOLT (SPREADER) Wheel, 3/8'' - 24 x 1 1/4''; BOLT, flywheel
-
2LOCK; flywheel bolt
-
161NOT SOLD SEPARAT; RING, oil seal wear, not serviced separately order oil seal assembly, 378193R91
-
1BEARING SET; crankshaft, standard, consists of two bearings, 375755R11 and one bearing, 375762R11
-
1SET; BEARING SET, crankshaft, .002 undersize, consists of two bearings, 375757R11 and one bearing, 375764R11
-
1SET; BEARING SET, crankshaft, .010 undersize, consists of two bearings, 376660R11 and one bearing, 376661R11
-
1SET; BEARING SET, crankshaft, .020 undersize, consists of two bearings, 376663R11 and one bearing, 376664R11
-
1BEARING SET; crankshaft, .030 undersize, consists of two bearings, 375756R11 and one bearing, 375763R11
-
ARBALL BEARING 20mm ID x 47mm OD x 14mm W; pilot, end of crankshaft next to flywheel
Ref.
3Qty
1Availability
Part #
218211Description
DRIVING SPROCKET; 1/4 x 3/4 Woodruff 91, crankshaft pinionImg
Alts
Ref.
4Qty
1Availability
Part #
126-117Description
WOODRUFF KEY #91, 1/4'' x 3/4'', HT; 1/4 x 3/4 Woodruff 91, fan drive pulleyImg
Alts
Ref.
6Qty
1Availability
Part #
219760Description
BACK-UP RING; 1-14 hex, jam, crankshaft, for tractors equipped with front PTOImg
Alts
Ref.
7Qty
1Availability
Part #
V84199Description
NUT 1''-14, Thin; crankshaft, used on tractors with starting crankImg
Alts
Ref.
8Qty
1Availability
Part #
53385DCXDescription
CRANK; ASSY, starting, international tractors equipped with starting crankImg
Alts
Ref.
10Qty
2Availability
Part #
375755R11Description
BEARING SET; BEARING ASSEMBLY, crankshaft front and center, 2 halves, standardImg
Alts
Ref.
10Qty
2Availability
Part #
375757R11Description
KIT; BEARING ASSEMBLY, crankshaft front and center, 2 halves, .002 undersizeImg
Alts
Ref.
10Qty
2Availability
Part #
376660R11Description
KIT; BEARING ASSEMBLY, crankshaft front and center, 2 halves, .010 undersizeImg
Alts
Ref.
10Qty
2Availability
Part #
376663R11Description
BEARING ASSY; ASSEMBLY, crankshaft front and center, 2 halves, .020 undersizeImg
Alts
Ref.
10Qty
2Availability
Part #
375756R11Description
CRANKSHAFT BEARING; BEARING ASSEMBLY, crankshaft front and center, 2 halves, .030 undersizeImg
Alts
Ref.
11Qty
1Availability
Part #
375762R11Description
BEARING SET; BEARING ASSEMBLY, crankshaft rear, 2 halves, standardImg
Alts
Ref.
11Qty
1Availability
Part #
375764R11Description
BEARING ASSY; BEARING ASSEMBLY, crankshaft rear, 2 halves, .002 undersizeImg
Alts
Ref.
11Qty
1Availability
Part #
376661R11Description
BEARING ASSY; ASSEMBLY, crankshaft rear, 2 halves, .010 undersizeImg
Alts
Ref.
11Qty
1Availability
Part #
376664R11Description
BEARING ASSY; BEARING ASSEMBLY, crankshaft rear, 2 halves, .020 undersizeImg
Alts
Ref.
11Qty
1Availability
Part #
375763R11Description
BEARING ASSY; BEARING ASSEMBLY, crankshaft rear, 2 halves, .030 undersizeImg
Alts
Ref.
15Qty
4Availability
Part #
358246R1Description
BOLT (SPREADER) Wheel, 3/8'' - 24 x 1 1/4''; BOLT, flywheelImg
Alts
Ref.
16Qty
1Availability
Part #
NSSDescription
NOT SOLD SEPARAT; RING, oil seal wear, not serviced separately order oil seal assembly, 378193R91Img
Alts
Ref.
Qty
1Availability
Part #
375769R91Description
BEARING SET; crankshaft, standard, consists of two bearings, 375755R11 and one bearing, 375762R11Img
Alts
Ref.
Qty
1Availability
Part #
377274R91Description
SET; BEARING SET, crankshaft, .002 undersize, consists of two bearings, 375757R11 and one bearing, 375764R11Img
Alts
Ref.
Qty
1Availability
Part #
376659R91Description
SET; BEARING SET, crankshaft, .010 undersize, consists of two bearings, 376660R11 and one bearing, 376661R11Img
Alts
Ref.
Qty
1Availability
Part #
376662R91Description
SET; BEARING SET, crankshaft, .020 undersize, consists of two bearings, 376663R11 and one bearing, 376664R11Img
Alts
Ref.
Qty
1Availability
Part #
375770R91Description
BEARING SET; crankshaft, .030 undersize, consists of two bearings, 375756R11 and one bearing, 375763R11Img
Alts
Ref.
Qty
ARAvailability
Part #
ST553Description
BALL BEARING 20mm ID x 47mm OD x 14mm W; pilot, end of crankshaft next to flywheelImg
Alts