TABLE OF CONTENTS
DIAGRAM
PART LIST
Clear callout
Select All
Ref.
Qty
Part #
Alts
Description
Image
-
11TANK; Weld Assy.
-
10BOLT Hex, 1/2'' - 13 x 1'', Gr 5;
-
22DECAL; Safety Red Reflective
-
31COVER; Drain
-
1BOLT Hex, 7/16'' - 14 x 1 1/4'', Gr 5, Full Thd;
-
1WASHER 0.47'' ID x 0.92'' OD x 0.07'' Thk; SAE, 7/16''
-
1NUT 7/16''-14, GC; Nut, Lock, GC, 7/16''-14
-
41AXLE; Weld Assy.
-
4BOLT 1/2'' - 13 x 1-1/4'', Full Thd, Gr 5;
-
4LOCK NUT 1/2'' - 13, Gr C; Nut, Lock, GC, 1/2''-13
-
52WHEEL; Disc, 20'' Drop Center
-
5A2WHEEL; Disc, Semi-drop Center, Includes: Ref. 5B, W/Chamfered Bolt Holes
-
5B2RING; Lock
-
61BOLT Hex, 1'' - 8 x 2-1/2'', Gr 5; Weld Assy.
-
2BOLT Hex, 5/8'' - 11 x 1 1/4'', Gr 5, Full Thd;
-
2LOCK NUT 5/8'' - 11, Gr C; Nut, Lock, GC, 5/8''-11
-
581SEAL; Seal, Oil
-
71TONGUE; Weld Assy., R.H.
-
7BOLT 1/2'' - 13 x 1-1/4'', Full Thd, Gr 5;
-
4WASHER 0.56'' ID x 1.38'' OD x 0.11'' Thk;
-
81TONGUE; Weld Assy., L.H.
-
7BOLT 1/2'' - 13 x 1-1/4'', Full Thd, Gr 5;
-
4WASHER 0.56'' ID x 1.38'' OD x 0.11'' Thk;
-
91LUG; Mount, PTO
-
102SPARE PART; Plate Weld Assy., Hitch
-
6BOLT Hex, 5/8'' - 11 x 6'', Gr 5; Screw, Cap, HH, G5, 5/8''-11 x 6''
-
651COTTER PIN 5/32'' x 1 1/4''; Pin, Split, (Cotter), 5/32'' x 1 1/4''
-
6LOCK WASHER 5/8'' ID x 0.634'' OD x .156'' Thk CST ZND; Washer, Lock, 5/8''
-
6NUT Hex, 5/8'' - 11, Gr 5; G5, 5/8''-11
-
111JACK; Assembly, Refer to Fig. 4 for Component Breakdown
-
121COLLAR; Jack Attaching
-
1GROOVED PIN 7.94mm OD x 63.5mm L; Pin, Grooved, 5/16'' x 2 1/2'', Type A
-
131FLANGED BEARING; ., Front, Includes: Collar
-
1LUBE NIPPLE 45 Degree, 1/8'' NPT x 7/8'' lg; Fitting, Lube, 45?, 1/8''
-
4LOCK NUT 1/2'' - 13, Gr C; Nut, Lock, GC, 1/2''-13
-
141SEAL; Front
-
151ROTOR; Assy., Includes: Ref. 16 thru 21
-
164PLATE; Anchor, Rotor, Replacement on rotor requires a welding operation, Refer to Caution Note in Fig. 1
-
171SHAFT; Stub, Replacement for rotor drive end requires a welding operation, Refer to Cauton Note in Fig. 1
-
17AARSPARE PART; Tab, Rotor, Requires Welding, Refer to Caution Note in Fig. 1
-
184SPARE PART; Flinger Weld Assy.
-
194BUSHING;
-
204WASHER; Special, Replaces 65503
-
214BOLT Hex, 3/4'' - 10 x 2 1/2'', Gr 5; Screw, Cap, HH, G5, 3/4''-10 x 2-1/2''
-
4NUT 3/4'' - 10, Gr C; Nut, Lock, GC, 3/4''-10
-
221SEAL; Seal, Rear
-
231BEARING COVER; Plate, Rear Rotor Bearing
-
241FLANGED BEARING Ball, 34.9mm ID x 72mm OD x 37.7mm W; ., Rear, Includes: Collar
-
1LUBE NIPPLE 3/16'' x .55'' lg, Drive; NIPPLE, LUBE, 3/16'' x .55'' lg, Drive
-
1LUBE NIPPLE 45 Degree, 1/8'' NPT x 7/8'' lg; Fitting, Lube, 45?, 1/8''
-
4BOLT 1/2''-13 x 1.813'' OAL, Gr 5;
-
4LOCK NUT 1/2'' - 13, Gr C; Nut, Lock, GC, 1/2''-13
-
2532SPARE PART; Flail Assy., w/Hardware
-
32BOLT 1/2''-13 x 1.813'' OAL, Gr 5;
-
32WASHER .530'' ID x 1.125'' OD x .183'' Thk; Special
-
32LOCK NUT 1/2'' - 13, Gr C; Nut, Lock, GC, 1/2''-13
-
261SHIELD; Splash;Description rear & front laction on Ref. 26, 27, 28 & 33 only applicable if manure is going to be spread from the right side. These items would be reversed front going to the rear & rear coming front if manure delivery is going to be made from the left si;Used on & ASN 4626
-
5BOLT Hex, 1/2'' - 13 x 1'', Gr 5;
-
5WASHER 0.56'' ID x 1.38'' OD x 0.11'' Thk;
-
271SHIELD; Splash;Description rear & front laction on Ref. 26, 27, 28 & 33 only applicable if manure is going to be spread from the right side. These items would be reversed front going to the rear & rear coming front if manure delivery is going to be made from the left si;Used on & ASN 4626
-
5BOLT Hex, 1/2'' - 13 x 1'', Gr 5;
-
5WASHER 0.56'' ID x 1.38'' OD x 0.11'' Thk;
-
281PANEL; Upper Rear End;Description rear & front laction on Ref. 26, 27, 28 & 33 only applicable if manure is going to be spread from the right side. These items would be reversed front going to the rear & rear coming front if manure delivery is going to be made from the left si
-
4BOLT Hex, 1/2'' - 13 x 1'', Gr 5;
-
291DECAL SMV; SMV
-
301PIVOT Hex, 7/8'' - 14 x 2 1/4'', Gr 5; Weld Assy., Rear
-
2BOLT Hex, 1/2'' - 13 x 1'', Gr 5;
-
312COVER; Corner
-
321PANEL; Upper Side
-
10BOLT 1/2'' - 13 x 1-1/4'', Full Thd, Gr 5;
-
10BOLT Hex, 1/2'' - 13 x 1'', Gr 5;
-
20WASHER 0.56'' ID x 1.38'' OD x 0.11'' Thk;
-
331PANEL Hex, 1''-8 x 1 3/4'', G5, Full Thd; Upper Front End;Description rear & front laction on Ref. 26, 27, 28 & 33 only applicable if manure is going to be spread from the right side. These items would be reversed front going to the rear & rear coming front if manure delivery is going to be made from the left si
-
2BOLT Hex, 1/2'' - 13 x 1'', Gr 5;
-
341SPARE PART; Pivot Weld Assy.
-
2BOLT Hex, 1/2'' - 13 x 1'', Gr 5;
-
351LID; Weld Assy.
-
361BOLT Hex, 7/8'' - 14 x 2'', Gr 5; Strap, Hinge
-
4BOLT Hex, 1/2'' - 13 x 1'', Gr 5;
-
4WASHER 0.56'' ID x 1.38'' OD x 0.11'' Thk;
-
371STOP; Lid, Rear
-
2BOLT Hex, 1/2'' - 13 x 1'', Gr 5;
-
381SPARE PART; Stop, Lid, Front
-
2BOLT Hex, 1/2'' - 13 x 1'', Gr 5;
-
392SPACER; Support
-
402SUPPORT; Lid Extension
-
4BOLT 1/2'' - 13 x 1-1/4'', Full Thd, Gr 5;
-
411LEVER; Weld Assy., Extension
-
2BOLT 1/2''-13 x 1.813'' OAL, Gr 5;
-
422HANDLE GRIP; Grip, Safety
-
432NO LONGER SERVICED; Bushing
-
441EXTENSION; Lid Weld Assy., Extension
-
2BOLT Hex, 3/4'' - 10 x 1 3/4'', Gr 5, Full Thd;
-
2WASHER 0.81'' ID x 1.47'' OD x 0.13'' Thk; SAE, 3/4''
-
2NUT 3/4'' - 10, Gr C; Nut, Lock, GC, 3/4''-10
-
451BRACKET; R.H. Shield Mounting, Top
-
1BOLT 1/2''-13 x 1.813'' OAL, Gr 5;
-
461BRACKET; L.H., Shield Mounting, Top
-
471BRACKET; Weld Assy., Lever Mounting
-
2BOLT 1/2''-13 x 1.813'' OAL, Gr 5;
-
481BOLT Hex, 7/8'' - 14 x 4'', Gr 5; Weld Assy.
-
1WASHER 1.06'' ID x 2.5'' OD x 0.17'' Thk;
-
491BUSHING;
-
501CONNECTING LINK; Link
-
1BOLT Hex, 1/2'' - 13 x 2'', Gr 5; Screw, Cap, HH, G5, 1/2''-13 x 2''
-
1BOLT 1/2'' - 13 x 1-1/4'', Full Thd, Gr 5;
-
2WASHER 0.56'' ID x 1.38'' OD x 0.11'' Thk;
-
511DRIVING SPROCKET; Sprocket, 29T, For 540 RPM
-
511SPROCKET; 40T, For 1000 RPM
-
522SERRATED SCREW 1/2'' x 1 3/4''; Set, Sq Hd, Cup Pt, 1/2'' x 1-3/4''
-
531KEY; Machinee, 1/2'' Sq x 2-1/4''
-
541SPROCKET; 15T, For 540 RPM, Std
-
2SUPPORT; Bolt, Shear, 7/16'' x 2-3/4'', w/Locknut
-
541SPROCKET; 17T, For 540 RPM, Optional
-
2SUPPORT; Bolt, Shear, 7/16'' x 2-3/4'', w/Locknut
-
541DRIVING SPROCKET; Sprocket, 13T, Std For 1000 RPM, Optional for 540 RPM
-
2SUPPORT; Bolt, Shear, 7/16'' x 2-3/4'', w/Locknut
-
552BOLT Hex, Tap, 1/2'' - 13 x 2.50'', Gr 5; Screw, Cap, HH, Tap, G5, 1/2'' x 2''
-
561LOCK PIN; Hub Assy., Reduction, Includes: Ref. 60 & 61
-
571SPINDLE; Shaft, Drive
-
591ROLLER BEARING; Bearing, Cone
-
601BEARING CUP 65.08mm OD x 13.97mm W; Bearing, Cup
-
611BEARING CUP 59.16mm OD x 11.81mm W; Cup, Tapered Roller Bearing
-
621BEARING CONE 31.75mm ID x 16.76mm W; Cone, Tapered Roller Bearing
-
631WASHER; Hardened
-
641SLOTTED NUT 7/8''-14; Nut, Slotted, G2, 7/8''-14
-
661DUST CAP 2 - 3/8'' OD; Cap, Hub
-
671CHAIN; Assy., Rotor Drive, R.H., RC100, 45 Pitches, For 540 RPM
-
ARCONNECTING LINK; Link, Roller, RC 100
-
ARLINK 31.75mm Pitch; Link, Offset, Roller, RC 100, Cotter Style
-
ARCLAMP 1/2'', Insul, 1/4'' Bolt; Link, Coupler
-
671CHAIN; Assy., Rotor Drive, R.H., RC100, 50 Pitches, For 1000 RPM
-
ARCONNECTING LINK; Link, Roller, RC 100
-
ARLINK 31.75mm Pitch; Link, Offset, Roller, RC 100, Cotter Style
-
ARCONNECTING LINK; Link, Coupler
-
691BRACKET; Weld Assy., Shield Mounting
-
701SHIELD; Drive Chain, Replaces 196195
-
2BOLT Hex, 3/8'' - 16 x 1'', Gr 5;
-
4WASHER 0.47'' ID x 0.92'' OD x 0.07'' Thk; SAE, 3/8'' ID x .065'' Thk
-
711SHIELD; Used on & Between S/N 5100 & 5524
-
2BOLT Hex, 3/8'' - 16 x 1'', Gr 5;
-
4WASHER 0.41'' ID x 0.81'' OD x 0.07'' Thk; SAE, 3/8''
-
711SHIELD; Used on ASN5525
-
2BOLT Hex, 3/8'' - 16 x 1'', Gr 5;
-
4WASHER 0.41'' ID x 0.81'' OD x 0.07'' Thk; SAE, 3/8''
-
721SHIELD; Weld Assy., R.H.;Used on & Between S/N 5100 & 5524
-
721SHIELD; Weld Assy., R.H.;Used on ASN5525
-
731SHIELD; Weld Assy., L.H.;Used on & Between S/N 5100 & 5524
-
731SHIELD; Weld Assy., L.H.;Used on ASN5525
-
741STRAP; Assy.;Used on & Between S/N 5100 & 5524
-
751SUPPORT; Weld Assy., L.H. Drive;Components for Optional L.H. Spread
-
2WASHER 0.56'' ID x 1.38'' OD x 0.11'' Thk;
-
2LOCK NUT 1/2'' - 13, Gr C; Nut, Lock, GC, 1/2''-13
-
762DRIVING SPROCKET; Sprocket Assy., Idler, Includes: Ref. 77 & 78;Components for Optional L.H. Spread
-
772BALL BEARING 1.125'' ID x 2.4409'' OD x 1.4375''; Bearing, Ball, Fafnir;Components for Optional L.H. Spread
-
782COLLAR 28.6mm ID x 44.45mm OD x 16mm W; Set, Fafnir;Components for Optional L.H. Spread
-
2SET SCREW Hex Soc, 5/16''-18 x 5/16''; Screw, Set, HS, Cup Pt, 5/16''-18 x 5/16''
-
782COLLAR; Set, Aetna;Components for Optional L.H. Spread
-
2SET SCREW Hex Soc, 5/16''-18 x 5/16''; Screw, Set, HS, Cup Pt, 5/16''-18 x 5/16''
-
791CHAIN; Assy., Rotor Drive, L.H., RC100, 81 Pitches, For 540 RPM;Components for Optional L.H. Spread
-
ARCONNECTING LINK; Link, Roller, RC 100
-
ARLINK 31.75mm Pitch; Link, Offset, Roller, RC 100, Cotter Style
-
ARCLAMP 1/2'', Insul, 1/4'' Bolt; Link, Coupler
-
791CHAIN; Assy., Rotor Drive, L.H., RC100, 86 Pitches, For 1000 RPM;Components for Optional L.H. Spread
-
ARCONNECTING LINK; Link, Roller, RC 100
-
ARLINK 31.75mm Pitch; Link, Offset, Roller, RC 100, Cotter Style
-
ARCONNECTING LINK; Link, Coupler
-
4LOCK NUT PREVAILING TORQUE, 3/8'' - 16, Gr C, Directional; Nut, Lock, GC, 3/8''-16
-
4LOCK NUT PREVAILING TORQUE, 3/8'' - 16, Gr C, Directional; Nut, Lock, GC, 3/8''-16
-
4LOCK NUT PREVAILING TORQUE, 3/8'' - 16, Gr C, Directional; Nut, Lock, GC, 3/8''-16
-
7NUT 1/2''-13, G5;
-
7NUT 1/2''-13, G5;
-
1NUT 1/2''-13, G5;
-
1NUT 1/2''-13, G5;
-
2NUT 1/2''-13, G5;
-
2NUT 1/2''-13, G5;
-
20NUT 1/2''-13, G5;
-
2NUT 1/2''-13, G5;
-
2NUT 1/2''-13, G5;
-
4NUT 1/2''-13, G5;
-
2NUT 1/2''-13, G5;
-
2NUT 1/2''-13, G5;
-
4NUT 1/2''-13, G5;
-
2NUT 1/2''-13, G5;
-
1NUT 1/2''-13, G5;
-
2NUT 1/2''-13, G5;
-
2NUT 1/2''-13, G5;
-
2NUT 1/2''-13, G5;
-
2NUT 1/2''-13, G5;
-
10LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''
-
7LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''
-
7LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''
-
5LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''
-
5LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''
-
4LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''
-
2LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''
-
20LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''
-
2LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''
-
2LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''
-
4LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''
-
2LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''
-
2LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''
-
4LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''
-
2LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''
-
1LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''
-
2LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''
-
2LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''
-
2LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''
-
1COTTER PIN 3/16'' OD x 1-1/2'' OAL; Pin, Split (Cotter), 3/16'' x 1 1/2''
Select All
Ref.
Qty
1Availability
Part #
9627887Description
BOLT Hex, 7/16'' - 14 x 1 1/4'', Gr 5, Full Thd;Img
Alts
Ref.
Qty
1Availability
Part #
87363Description
WASHER 0.47'' ID x 0.92'' OD x 0.07'' Thk; SAE, 7/16''Img
Alts
Ref.
Qty
1Availability
Part #
280980Description
NUT 7/16''-14, GC; Nut, Lock, GC, 7/16''-14Img
Alts
Ref.
Qty
4Availability
Part #
87670Description
BOLT 1/2'' - 13 x 1-1/4'', Full Thd, Gr 5;Img
Alts
Ref.
Qty
4Availability
Part #
88871Description
LOCK NUT 1/2'' - 13, Gr C; Nut, Lock, GC, 1/2''-13Img
Alts
Ref.
5AQty
2Availability
Part #
86604271Description
WHEEL; Disc, Semi-drop Center, Includes: Ref. 5B, W/Chamfered Bolt HolesImg
Alts
Ref.
6Qty
1Availability
Part #
413-1640Description
BOLT Hex, 1'' - 8 x 2-1/2'', Gr 5; Weld Assy.Img
Alts
Ref.
Qty
2Availability
Part #
280319Description
BOLT Hex, 5/8'' - 11 x 1 1/4'', Gr 5, Full Thd;Img
Alts
Ref.
Qty
2Availability
Part #
85700693Description
LOCK NUT 5/8'' - 11, Gr C; Nut, Lock, GC, 5/8''-11Img
Alts
Ref.
Qty
7Availability
Part #
87670Description
BOLT 1/2'' - 13 x 1-1/4'', Full Thd, Gr 5;Img
Alts
Ref.
Qty
4Availability
Part #
80700Description
WASHER 0.56'' ID x 1.38'' OD x 0.11'' Thk;Img
Alts
Ref.
Qty
7Availability
Part #
87670Description
BOLT 1/2'' - 13 x 1-1/4'', Full Thd, Gr 5;Img
Alts
Ref.
Qty
4Availability
Part #
80700Description
WASHER 0.56'' ID x 1.38'' OD x 0.11'' Thk;Img
Alts
Ref.
Qty
6Availability
Part #
88264Description
BOLT Hex, 5/8'' - 11 x 6'', Gr 5; Screw, Cap, HH, G5, 5/8''-11 x 6''Img
Alts
Ref.
65Qty
1Availability
Part #
84887Description
COTTER PIN 5/32'' x 1 1/4''; Pin, Split, (Cotter), 5/32'' x 1 1/4''Img
Alts
Ref.
Qty
6Availability
Part #
86729275Description
LOCK WASHER 5/8'' ID x 0.634'' OD x .156'' Thk CST ZND; Washer, Lock, 5/8''Img
Alts
Ref.
11Qty
1Availability
Part #
128437Description
JACK; Assembly, Refer to Fig. 4 for Component BreakdownImg
Alts
Ref.
Qty
1Availability
Part #
81824Description
GROOVED PIN 7.94mm OD x 63.5mm L; Pin, Grooved, 5/16'' x 2 1/2'', Type AImg
Alts
Ref.
13Qty
1Availability
Part #
130114Description
FLANGED BEARING; ., Front, Includes: CollarImg
Alts
Ref.
Qty
1Availability
Part #
80717Description
LUBE NIPPLE 45 Degree, 1/8'' NPT x 7/8'' lg; Fitting, Lube, 45?, 1/8''Img
Alts
Ref.
Qty
4Availability
Part #
88871Description
LOCK NUT 1/2'' - 13, Gr C; Nut, Lock, GC, 1/2''-13Img
Alts
Ref.
15Qty
1Availability
Part #
196220Description
ROTOR; Assy., Includes: Ref. 16 thru 21Img
Alts
Ref.
16Qty
4Availability
Part #
222204Description
PLATE; Anchor, Rotor, Replacement on rotor requires a welding operation, Refer to Caution Note in Fig. 1Img
Alts
Ref.
17Qty
1Availability
Part #
196270Description
SHAFT; Stub, Replacement for rotor drive end requires a welding operation, Refer to Cauton Note in Fig. 1Img
Alts
Ref.
17AQty
ARAvailability
Part #
273869Description
SPARE PART; Tab, Rotor, Requires Welding, Refer to Caution Note in Fig. 1Img
Alts
Ref.
21Qty
4Availability
Part #
9706701Description
BOLT Hex, 3/4'' - 10 x 2 1/2'', Gr 5; Screw, Cap, HH, G5, 3/4''-10 x 2-1/2''Img
Alts
Ref.
Qty
4Availability
Part #
280375Description
NUT 3/4'' - 10, Gr C; Nut, Lock, GC, 3/4''-10Img
Alts
Ref.
23Qty
1Availability
Part #
196218Description
BEARING COVER; Plate, Rear Rotor BearingImg
Alts
Ref.
24Qty
1Availability
Part #
135099Description
FLANGED BEARING Ball, 34.9mm ID x 72mm OD x 37.7mm W; ., Rear, Includes: CollarImg
Alts
Ref.
Qty
1Availability
Part #
80722Description
LUBE NIPPLE 3/16'' x .55'' lg, Drive; NIPPLE, LUBE, 3/16'' x .55'' lg, DriveImg
Alts
Ref.
Qty
1Availability
Part #
80717Description
LUBE NIPPLE 45 Degree, 1/8'' NPT x 7/8'' lg; Fitting, Lube, 45?, 1/8''Img
Alts
Ref.
Qty
4Availability
Part #
88871Description
LOCK NUT 1/2'' - 13, Gr C; Nut, Lock, GC, 1/2''-13Img
Alts
Ref.
Qty
32Availability
Part #
262183Description
WASHER .530'' ID x 1.125'' OD x .183'' Thk; SpecialImg
Alts
Ref.
Qty
32Availability
Part #
88871Description
LOCK NUT 1/2'' - 13, Gr C; Nut, Lock, GC, 1/2''-13Img
Alts
Ref.
26Qty
1Availability
Part #
272878Description
SHIELD; Splash;Description rear & front laction on Ref. 26, 27, 28 & 33 only applicable if manure is going to be spread from the right side. These items would be reversed front going to the rear & rear coming front if manure delivery is going to be made from the left si;Used on & ASN 4626Img
Alts
Ref.
Qty
5Availability
Part #
80700Description
WASHER 0.56'' ID x 1.38'' OD x 0.11'' Thk;Img
Alts
Ref.
27Qty
1Availability
Part #
272877Description
SHIELD; Splash;Description rear & front laction on Ref. 26, 27, 28 & 33 only applicable if manure is going to be spread from the right side. These items would be reversed front going to the rear & rear coming front if manure delivery is going to be made from the left si;Used on & ASN 4626Img
Alts
Ref.
Qty
5Availability
Part #
80700Description
WASHER 0.56'' ID x 1.38'' OD x 0.11'' Thk;Img
Alts
Ref.
28Qty
1Availability
Part #
271854Description
PANEL; Upper Rear End;Description rear & front laction on Ref. 26, 27, 28 & 33 only applicable if manure is going to be spread from the right side. These items would be reversed front going to the rear & rear coming front if manure delivery is going to be made from the left siImg
Alts
Ref.
30Qty
1Availability
Part #
271838Description
PIVOT Hex, 7/8'' - 14 x 2 1/4'', Gr 5; Weld Assy., RearImg
Alts
Ref.
Qty
10Availability
Part #
87670Description
BOLT 1/2'' - 13 x 1-1/4'', Full Thd, Gr 5;Img
Alts
Ref.
Qty
20Availability
Part #
80700Description
WASHER 0.56'' ID x 1.38'' OD x 0.11'' Thk;Img
Alts
Ref.
33Qty
1Availability
Part #
271853Description
PANEL Hex, 1''-8 x 1 3/4'', G5, Full Thd; Upper Front End;Description rear & front laction on Ref. 26, 27, 28 & 33 only applicable if manure is going to be spread from the right side. These items would be reversed front going to the rear & rear coming front if manure delivery is going to be made from the left siImg
Alts
Ref.
36Qty
1Availability
Part #
14-1432Description
BOLT Hex, 7/8'' - 14 x 2'', Gr 5; Strap, HingeImg
Alts
Ref.
Qty
4Availability
Part #
80700Description
WASHER 0.56'' ID x 1.38'' OD x 0.11'' Thk;Img
Alts
Ref.
Qty
4Availability
Part #
87670Description
BOLT 1/2'' - 13 x 1-1/4'', Full Thd, Gr 5;Img
Alts
Ref.
Qty
2Availability
Part #
88725Description
BOLT Hex, 3/4'' - 10 x 1 3/4'', Gr 5, Full Thd;Img
Alts
Ref.
Qty
2Availability
Part #
87381Description
WASHER 0.81'' ID x 1.47'' OD x 0.13'' Thk; SAE, 3/4''Img
Alts
Ref.
Qty
2Availability
Part #
280375Description
NUT 3/4'' - 10, Gr C; Nut, Lock, GC, 3/4''-10Img
Alts
Ref.
48Qty
1Availability
Part #
14-1464Description
BOLT Hex, 7/8'' - 14 x 4'', Gr 5; Weld Assy.Img
Alts
Ref.
Qty
1Availability
Part #
9706716Description
BOLT Hex, 1/2'' - 13 x 2'', Gr 5; Screw, Cap, HH, G5, 1/2''-13 x 2''Img
Alts
Ref.
Qty
1Availability
Part #
87670Description
BOLT 1/2'' - 13 x 1-1/4'', Full Thd, Gr 5;Img
Alts
Ref.
Qty
2Availability
Part #
80700Description
WASHER 0.56'' ID x 1.38'' OD x 0.11'' Thk;Img
Alts
Ref.
51Qty
1Availability
Part #
166136Description
DRIVING SPROCKET; Sprocket, 29T, For 540 RPMImg
Alts
Ref.
52Qty
2Availability
Part #
80382Description
SERRATED SCREW 1/2'' x 1 3/4''; Set, Sq Hd, Cup Pt, 1/2'' x 1-3/4''Img
Alts
Ref.
Qty
2Availability
Part #
130153Description
SUPPORT; Bolt, Shear, 7/16'' x 2-3/4'', w/LocknutImg
Alts
Ref.
Qty
2Availability
Part #
130153Description
SUPPORT; Bolt, Shear, 7/16'' x 2-3/4'', w/LocknutImg
Alts
Ref.
54Qty
1Availability
Part #
168703Description
DRIVING SPROCKET; Sprocket, 13T, Std For 1000 RPM, Optional for 540 RPMImg
Alts
Ref.
Qty
2Availability
Part #
130153Description
SUPPORT; Bolt, Shear, 7/16'' x 2-3/4'', w/LocknutImg
Alts
Ref.
55Qty
2Availability
Part #
9849637Description
BOLT Hex, Tap, 1/2'' - 13 x 2.50'', Gr 5; Screw, Cap, HH, Tap, G5, 1/2'' x 2''Img
Alts
Ref.
56Qty
1Availability
Part #
80130047Description
LOCK PIN; Hub Assy., Reduction, Includes: Ref. 60 & 61Img
Alts
Ref.
60Qty
1Availability
Part #
86516467Description
BEARING CUP 65.08mm OD x 13.97mm W; Bearing, CupImg
Alts
Ref.
61Qty
1Availability
Part #
36723Description
BEARING CUP 59.16mm OD x 11.81mm W; Cup, Tapered Roller BearingImg
Alts
Ref.
62Qty
1Availability
Part #
36726Description
BEARING CONE 31.75mm ID x 16.76mm W; Cone, Tapered Roller BearingImg
Alts
Ref.
64Qty
1Availability
Part #
280172Description
SLOTTED NUT 7/8''-14; Nut, Slotted, G2, 7/8''-14Img
Alts
Ref.
67Qty
1Availability
Part #
166152Description
CHAIN; Assy., Rotor Drive, R.H., RC100, 45 Pitches, For 540 RPMImg
Alts
Ref.
Qty
ARAvailability
Part #
86977432Description
LINK 31.75mm Pitch; Link, Offset, Roller, RC 100, Cotter StyleImg
Alts
Ref.
Qty
ARAvailability
Part #
515-21127Description
CLAMP 1/2'', Insul, 1/4'' Bolt; Link, CouplerImg
Alts
Ref.
67Qty
1Availability
Part #
238280Description
CHAIN; Assy., Rotor Drive, R.H., RC100, 50 Pitches, For 1000 RPMImg
Alts
Ref.
Qty
ARAvailability
Part #
86977432Description
LINK 31.75mm Pitch; Link, Offset, Roller, RC 100, Cotter StyleImg
Alts
Ref.
Qty
4Availability
Part #
87363Description
WASHER 0.47'' ID x 0.92'' OD x 0.07'' Thk; SAE, 3/8'' ID x .065'' ThkImg
Alts
Ref.
71Qty
1Availability
Part #
273323Description
SHIELD; Used on & Between S/N 5100 & 5524Img
Alts
Ref.
Qty
4Availability
Part #
87016Description
WASHER 0.41'' ID x 0.81'' OD x 0.07'' Thk; SAE, 3/8''Img
Alts
Ref.
Qty
4Availability
Part #
87016Description
WASHER 0.41'' ID x 0.81'' OD x 0.07'' Thk; SAE, 3/8''Img
Alts
Ref.
72Qty
1Availability
Part #
273324Description
SHIELD; Weld Assy., R.H.;Used on & Between S/N 5100 & 5524Img
Alts
Ref.
72Qty
1Availability
Part #
273875Description
SHIELD; Weld Assy., R.H.;Used on ASN5525Img
Alts
Ref.
73Qty
1Availability
Part #
273325Description
SHIELD; Weld Assy., L.H.;Used on & Between S/N 5100 & 5524Img
Alts
Ref.
73Qty
1Availability
Part #
273876Description
SHIELD; Weld Assy., L.H.;Used on ASN5525Img
Alts
Ref.
74Qty
1Availability
Part #
273326Description
STRAP; Assy.;Used on & Between S/N 5100 & 5524Img
Alts
Ref.
75Qty
1Availability
Part #
218550Description
SUPPORT; Weld Assy., L.H. Drive;Components for Optional L.H. SpreadImg
Alts
Ref.
Qty
2Availability
Part #
80700Description
WASHER 0.56'' ID x 1.38'' OD x 0.11'' Thk;Img
Alts
Ref.
Qty
2Availability
Part #
88871Description
LOCK NUT 1/2'' - 13, Gr C; Nut, Lock, GC, 1/2''-13Img
Alts
Ref.
76Qty
2Availability
Part #
166149Description
DRIVING SPROCKET; Sprocket Assy., Idler, Includes: Ref. 77 & 78;Components for Optional L.H. SpreadImg
Alts
Ref.
77Qty
2Availability
Part #
132295Description
BALL BEARING 1.125'' ID x 2.4409'' OD x 1.4375''; Bearing, Ball, Fafnir;Components for Optional L.H. SpreadImg
Alts
Ref.
78Qty
2Availability
Part #
45876Description
COLLAR 28.6mm ID x 44.45mm OD x 16mm W; Set, Fafnir;Components for Optional L.H. SpreadImg
Alts
Ref.
Qty
2Availability
Part #
80429Description
SET SCREW Hex Soc, 5/16''-18 x 5/16''; Screw, Set, HS, Cup Pt, 5/16''-18 x 5/16''Img
Alts
Ref.
78Qty
2Availability
Part #
130270Description
COLLAR; Set, Aetna;Components for Optional L.H. SpreadImg
Alts
Ref.
Qty
2Availability
Part #
80429Description
SET SCREW Hex Soc, 5/16''-18 x 5/16''; Screw, Set, HS, Cup Pt, 5/16''-18 x 5/16''Img
Alts
Ref.
79Qty
1Availability
Part #
238353Description
CHAIN; Assy., Rotor Drive, L.H., RC100, 81 Pitches, For 540 RPM;Components for Optional L.H. SpreadImg
Alts
Ref.
Qty
ARAvailability
Part #
86977432Description
LINK 31.75mm Pitch; Link, Offset, Roller, RC 100, Cotter StyleImg
Alts
Ref.
Qty
ARAvailability
Part #
515-21127Description
CLAMP 1/2'', Insul, 1/4'' Bolt; Link, CouplerImg
Alts
Ref.
79Qty
1Availability
Part #
238354Description
CHAIN; Assy., Rotor Drive, L.H., RC100, 86 Pitches, For 1000 RPM;Components for Optional L.H. SpreadImg
Alts
Ref.
Qty
ARAvailability
Part #
86977432Description
LINK 31.75mm Pitch; Link, Offset, Roller, RC 100, Cotter StyleImg
Alts
Ref.
Qty
4Availability
Part #
88902Description
LOCK NUT PREVAILING TORQUE, 3/8'' - 16, Gr C, Directional; Nut, Lock, GC, 3/8''-16Img
Alts
Ref.
Qty
4Availability
Part #
88902Description
LOCK NUT PREVAILING TORQUE, 3/8'' - 16, Gr C, Directional; Nut, Lock, GC, 3/8''-16Img
Alts
Ref.
Qty
4Availability
Part #
88902Description
LOCK NUT PREVAILING TORQUE, 3/8'' - 16, Gr C, Directional; Nut, Lock, GC, 3/8''-16Img
Alts
Ref.
Qty
10Availability
Part #
80679Description
LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''Img
Alts
Ref.
Qty
7Availability
Part #
80679Description
LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''Img
Alts
Ref.
Qty
7Availability
Part #
80679Description
LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''Img
Alts
Ref.
Qty
5Availability
Part #
80679Description
LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''Img
Alts
Ref.
Qty
5Availability
Part #
80679Description
LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''Img
Alts
Ref.
Qty
4Availability
Part #
80679Description
LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''Img
Alts
Ref.
Qty
2Availability
Part #
80679Description
LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''Img
Alts
Ref.
Qty
20Availability
Part #
80679Description
LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''Img
Alts
Ref.
Qty
2Availability
Part #
80679Description
LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''Img
Alts
Ref.
Qty
2Availability
Part #
80679Description
LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''Img
Alts
Ref.
Qty
4Availability
Part #
80679Description
LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''Img
Alts
Ref.
Qty
2Availability
Part #
80679Description
LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''Img
Alts
Ref.
Qty
2Availability
Part #
80679Description
LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''Img
Alts
Ref.
Qty
4Availability
Part #
80679Description
LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''Img
Alts
Ref.
Qty
2Availability
Part #
80679Description
LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''Img
Alts
Ref.
Qty
1Availability
Part #
80679Description
LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''Img
Alts
Ref.
Qty
2Availability
Part #
80679Description
LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''Img
Alts
Ref.
Qty
2Availability
Part #
80679Description
LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''Img
Alts
Ref.
Qty
2Availability
Part #
80679Description
LOCK WASHER 1/20.507 CST ZND; WASHER, LOCK, 1/2''Img
Alts
Ref.
Qty
1Availability
Part #
80754Description
COTTER PIN 3/16'' OD x 1-1/2'' OAL; Pin, Split (Cotter), 3/16'' x 1 1/2''Img
Alts