TABLE OF CONTENTS
DIAGRAM
PART LIST
Clear callout
Select All
Ref.
Qty
Part #
Alts
Description
Image
-
11GASKET KIT; Valve Grind, Incl. 2 -15A, - 44511033, Engines With 9 mm Fuel Injection Nozzle, Also Order Required Cylinder Head Gasket, See Figure 02-17, REF 2, No Longer Available, Order 87405727, See Figure 02-39
-
11GASKET KIT; Valve Grind, Incl. 2 - 15A, 44511034 - , Engines With 7 mm Fuel Injection Nozzle, Also Order Required Cylinder Head Gasket, See Figure 02-17, REF 2, No Longer Available, Order 87405727, See Figure 02-39
-
21GASKET; Thermostat Housing, Replaces J920020, See Figure 02-17, 02-18
-
38SEAL; Intake And Exhaust, See Figure 02-19, 02-20
-
41GASKET Bolt Hole (Ctr to Ctr) 44.5mm x 85.9mm; Turbocharger To Manifold, Not Used In This Application
-
54MANIFOLD GASKET; Exhaust Manifold, No Longer Available, Order J927154, See Figure 02-11
-
54GASKET 0.38mm Thk; See Figure 02-11
-
61GASKET; Intake Manifold, No Longer Available, Order J938153, See Figure 02-11
-
61MANIFOLD GASKET 0.8mm Thk; See Figure 02-11
-
71GASKET Bolt Hole (Ctr to Ctr) 50mm; Turbo Oil Drain Tube, Not Used In This Application
-
81O-RING 30mm ID x 48mm OD x 3mm Thk; Oil Fill Cap, See Figure 02-10
-
94GASKET; Rocker Arm Cover, See Figure 02-17, No Longer Available, Order J930906, See Figure 02-17
-
94GASKET; See Figure 02-17
-
104SEAL 9mm Injector Tip; Injection Nozzle, 9 mm Injector Tip, See Figure 03-09
-
114SEAL; Connector, See Figure 03-01, 03-03
-
124SEAL 7mm Injector Tip; Injection Nozzle, 7 mm Injector Tip, See Figure 03-10
-
134SEAL Square, 1.68mm Thk x 15.6mm ID, -16; Body To Nut, See Figure 03-09, 03-10, 7 mm
-
141GASKET 1.02mm Thk; Not Used In This Application
-
151GAUGE; Cylinder Head, Bolt Length, Use With A77792
-
15A4O-RING 0.07'' Thk x 0.364'' ID, -12, Cl 5, 75 Duro; Cover Bolt, See Figure 02-17, No Longer Available, Order J910824
-
15A4O-RING 0.07'' Thk x 0.364'' ID, -12, Cl 5, 75 Duro; See Figure 02-17
-
161GASKET KIT; Engine Block, Incl. 16 - 34, No Longer Available, Order A77860, See Figure 02-41
-
171SEALING RING 72.39mm ID x 90.39mm OD x 9mm Thk; Front Access Cover, See Figure 02-08, 02-09
-
181GASKET 1.02mm Thk; Front Cover, See Figure 02-08
-
191GASKET; See Figure 02-08, No Longer Available, Order J938156
-
191GASKET 0.79mm Thk; Gear Housing, See Figure 02-08
-
201GASKET; Timing Pin Housing, Not Used In This Application
-
211O-RING;
-
221GASKET; Access Cover Plate, See Figure 02-08, Replaces J913192, No Longer Available, Order 144169C2
-
221GASKET 0.79mm Thk; See Figure 02-08
-
231O-RING 0.21'' Thk x 3.475'' ID, -341, Cl 5, 75 Duro; Water Pump, See Figure 02-06
-
241GASKET; Tappet Cover, Replaces J904056, Not Used In This Application
-
251GASKET; Rear Cover Retainer, Crankshaft, Not Used In This Application
-
261SEAL Square, 5.16mm Thk x 50.17mm ID; 50 mm ID, Water Inlet Connection, See Figure 02-24
-
271GASKET; Oil Cooler Core, Replaces J914387 and J918256, See Figure 02-13
-
281GASKET; Filter Head, Replaces J912532, See Figure 02-13, No Longer Available, Order J929792
-
281GASKET 1.2mm Thk; See Figure 02-13
-
291SEALING WASHER 22.2mm ID x 26.9mm OD x 1.75mm Thk; Plug, Oil Pan, See Figure 02-15
-
301SEAL 41mm ID x 43mm OD x 2.5mm H; 38 mm (1-1/2 inch) ID, Engine Oil Fill Tube, See Figure 02-24
-
311GASKET; Pump Mounting, Fuel Injection, See Figure 03-06
-
321SEAL 157mm ID x 163.18mm OD x 7.03mm Thk; SEALRING Flywheel Housing To Block, See Figure 02-29
-
331GASKET; Mounting, Fuel Transfer Pump, Not Used In This Application
-
344SEAL; Cover Bolt, See Figure 03-01
Select All
Select
Ref.
1Qty
1Availability
Part #
A77672Description
GASKET KIT; Valve Grind, Incl. 2 -15A, - 44511033, Engines With 9 mm Fuel Injection Nozzle, Also Order Required Cylinder Head Gasket, See Figure 02-17, REF 2, No Longer Available, Order 87405727, See Figure 02-39Img
Alts
Select
Ref.
1Qty
1Availability
Part #
A77792Description
GASKET KIT; Valve Grind, Incl. 2 - 15A, 44511034 - , Engines With 7 mm Fuel Injection Nozzle, Also Order Required Cylinder Head Gasket, See Figure 02-17, REF 2, No Longer Available, Order 87405727, See Figure 02-39Img
Alts
Select
Ref.
2Qty
1Availability
Part #
J923331Description
GASKET; Thermostat Housing, Replaces J920020, See Figure 02-17, 02-18Img
Alts
Select
Ref.
3Qty
8Availability
Part #
J901097Description
SEAL; Intake And Exhaust, See Figure 02-19, 02-20Img
Alts
Select
Ref.
4Qty
1Availability
Part #
J901356Description
GASKET Bolt Hole (Ctr to Ctr) 44.5mm x 85.9mm; Turbocharger To Manifold, Not Used In This ApplicationImg
Alts
Select
Ref.
5Qty
4Availability
Part #
J905443Description
MANIFOLD GASKET; Exhaust Manifold, No Longer Available, Order J927154, See Figure 02-11Img
Alts
Select
Ref.
5Qty
4Availability
Part #
J927154Description
GASKET 0.38mm Thk; See Figure 02-11Img
Alts
Select
Ref.
6Qty
1Availability
Part #
J914028Description
GASKET; Intake Manifold, No Longer Available, Order J938153, See Figure 02-11Img
Alts
Select
Ref.
6Qty
1Availability
Part #
J938153Description
MANIFOLD GASKET 0.8mm Thk; See Figure 02-11Img
Alts
Select
Ref.
7Qty
1Availability
Part #
J914388Description
GASKET Bolt Hole (Ctr to Ctr) 50mm; Turbo Oil Drain Tube, Not Used In This ApplicationImg
Alts
Select
Ref.
8Qty
1Availability
Part #
J902363Description
O-RING 30mm ID x 48mm OD x 3mm Thk; Oil Fill Cap, See Figure 02-10Img
Alts
Select
Ref.
9Qty
4Availability
Part #
J902666Description
GASKET; Rocker Arm Cover, See Figure 02-17, No Longer Available, Order J930906, See Figure 02-17Img
Alts
Select
Ref.
10Qty
4Availability
Part #
J900808Description
SEAL 9mm Injector Tip; Injection Nozzle, 9 mm Injector Tip, See Figure 03-09Img
Alts
Select
Ref.
11Qty
4Availability
Part #
J903380Description
SEAL; Connector, See Figure 03-01, 03-03Img
Alts
Select
Ref.
12Qty
4Availability
Part #
J906659Description
SEAL 7mm Injector Tip; Injection Nozzle, 7 mm Injector Tip, See Figure 03-10Img
Alts
Select
Ref.
13Qty
4Availability
Part #
J909356Description
SEAL Square, 1.68mm Thk x 15.6mm ID, -16; Body To Nut, See Figure 03-09, 03-10, 7 mmImg
Alts
Select
Ref.
14Qty
1Availability
Part #
J914856Description
GASKET 1.02mm Thk; Not Used In This ApplicationImg
Alts
Select
Ref.
15Qty
1Availability
Part #
J823921Description
GAUGE; Cylinder Head, Bolt Length, Use With A77792Img
Alts
Select
Ref.
15AQty
4Availability
Part #
J282133Description
O-RING 0.07'' Thk x 0.364'' ID, -12, Cl 5, 75 Duro; Cover Bolt, See Figure 02-17, No Longer Available, Order J910824Img
Alts
Select
Ref.
15AQty
4Availability
Part #
J910824Description
O-RING 0.07'' Thk x 0.364'' ID, -12, Cl 5, 75 Duro; See Figure 02-17Img
Alts
Select
Ref.
16Qty
1Availability
Part #
A77671Description
GASKET KIT; Engine Block, Incl. 16 - 34, No Longer Available, Order A77860, See Figure 02-41Img
Alts
Select
Ref.
17Qty
1Availability
Part #
J903475Description
SEALING RING 72.39mm ID x 90.39mm OD x 9mm Thk; Front Access Cover, See Figure 02-08, 02-09Img
Alts
Select
Ref.
18Qty
1Availability
Part #
J914385Description
GASKET 1.02mm Thk; Front Cover, See Figure 02-08Img
Alts
Select
Ref.
19Qty
1Availability
Part #
J916131Description
GASKET; See Figure 02-08, No Longer Available, Order J938156Img
Alts
Select
Ref.
19Qty
1Availability
Part #
J938156Description
GASKET 0.79mm Thk; Gear Housing, See Figure 02-08Img
Alts
Select
Ref.
20Qty
1Availability
Part #
J905595Description
GASKET; Timing Pin Housing, Not Used In This ApplicationImg
Alts
Select
Ref.
22Qty
1Availability
Part #
J919601Description
GASKET; Access Cover Plate, See Figure 02-08, Replaces J913192, No Longer Available, Order 144169C2Img
Alts
Select
Ref.
22Qty
1Availability
Part #
144169C2Description
GASKET 0.79mm Thk; See Figure 02-08Img
Alts
Select
Ref.
23Qty
1Availability
Part #
238-5341Description
O-RING 0.21'' Thk x 3.475'' ID, -341, Cl 5, 75 Duro; Water Pump, See Figure 02-06Img
Alts
Select
Ref.
24Qty
1Availability
Part #
J922078Description
GASKET; Tappet Cover, Replaces J904056, Not Used In This ApplicationImg
Alts
Select
Ref.
25Qty
1Availability
Part #
J914386Description
GASKET; Rear Cover Retainer, Crankshaft, Not Used In This ApplicationImg
Alts
Select
Ref.
26Qty
1Availability
Part #
J906697Description
SEAL Square, 5.16mm Thk x 50.17mm ID; 50 mm ID, Water Inlet Connection, See Figure 02-24Img
Alts
Select
Ref.
27Qty
1Availability
Part #
J926760Description
GASKET; Oil Cooler Core, Replaces J914387 and J918256, See Figure 02-13Img
Alts
Select
Ref.
28Qty
1Availability
Part #
J918257Description
GASKET; Filter Head, Replaces J912532, See Figure 02-13, No Longer Available, Order J929792Img
Alts
Select
Ref.
28Qty
1Availability
Part #
J929792Description
GASKET 1.2mm Thk; See Figure 02-13Img
Alts
Select
Ref.
29Qty
1Availability
Part #
J902425Description
SEALING WASHER 22.2mm ID x 26.9mm OD x 1.75mm Thk; Plug, Oil Pan, See Figure 02-15Img
Alts
Select
Ref.
30Qty
1Availability
Part #
J906696Description
SEAL 41mm ID x 43mm OD x 2.5mm H; 38 mm (1-1/2 inch) ID, Engine Oil Fill Tube, See Figure 02-24Img
Alts
Select
Ref.
31Qty
1Availability
Part #
J914389Description
GASKET; Pump Mounting, Fuel Injection, See Figure 03-06Img
Alts
Select
Ref.
32Qty
1Availability
Part #
J912473Description
SEAL 157mm ID x 163.18mm OD x 7.03mm Thk; SEALRING Flywheel Housing To Block, See Figure 02-29Img
Alts
Select
Ref.
33Qty
1Availability
Part #
J914304Description
GASKET; Mounting, Fuel Transfer Pump, Not Used In This ApplicationImg
Alts
Select
Ref.
34Qty
4Availability
Part #
J900267Description
SEAL; Cover Bolt, See Figure 03-01Img
Alts