TABLE OF CONTENTS
DIAGRAM
PART LIST
Clear callout
Select All
Ref.
Qty
Part #
Alts
Description
Image
-
1SERVICE KIT; Grid Heater, Incl. Ref 1 - 33 and Instructions, Also Includes 8603092 Warning Decal, Explosion Hazard, Do Not Use Ether, If Used, No Longer Available, Order 87368406 Service Kit
-
1SERVICE KIT; Grid Heater, Incl. Ref 2 - 23, 25 - 38 and Instructions, Also Includes 8603092 Warning Decal, Explosion Hazard, Incl (1) Relay (Ref 35) and Harness (Ref 34) With Diode Which Removes Grid Heater Function During Engine Cranking for Cold Start Control
-
11PLATE; Cold Start, Without Mounting Holes For Engine Crank Relay (Ref 35), If Used, Included in 87430868 Kit
-
21CLAMP 3/4'', Insul, 5/16'' Bolt; (19 mm, M8 Bolt)
-
33BOLT Hex, M8 x 1.25 x 40mm, Cl 8.8, Full Thd;
-
43SPACER 9.8mm ID x 12.9mm OD x 11mm L;
-
53O-RING 0.07'' Thk x 0.301'' ID, -11, Cl 5, 75 Duro;
-
63THREADED INSERT M8 x 1.25; M8 x 1-1/4
-
71RELAY 12V, 150A; Cold Start
-
81HEATER; Grid Heater, Replaces 87409046
-
91JUNCTION BLOCK Fuse; Fuse Block
-
101FUSE 300A, Grey; 300 amp
-
112BOLT Hex, M6 x 1 x 35mm, Cl 8.8, Full Thd;
-
121PLATE 25mm W x 102mm L x 10mm Thk; 10 mm Thick Spacer Bar
-
133BOLT Hex, M6 x 1 x 20mm, Cl 8.8, Full Thd;
-
1411WASHER 6.6mm ID x 12mm OD x 1.6mm Thk;
-
156LOCK NUT M6 x 1, Cl 8;
-
161CARRIAGE BOLT Sht Sq Nk, M6 x 1 x 16mm, Cl 8.8;
-
175LOCK WASHER 8mm ID;
-
182NUT Hex, M8 x 1.25, Cl 10.9;
-
192BELLEVILLE WASHER M6 Bolt Size x 14mm OD x 1.3mm Thk;
-
202NUT Hex, M6 x 1, Cl 10.9;
-
211BAR; 90 mm Jumper Wire, Fuse Relay
-
221CABLE ASSY.; 500 mm Wire, Relay to Grid Heater
-
231CABLE ASSY. 1250mm L; 1250 mm Wire, Starter to Fuse Block
-
241WIRE HARNESS; Controller Harness, 4 End Connectors, Cold Start Control, Attaches to Engine Harness, Without Diode Connection Or Crank Relay Connection, If Used, Included in 87430868 Kit
-
251CABLE TIE 9.95''-12.1'' lg; CABLE STRAP Replaces D150521 292 mm Long Nylon Tie Strap Used On Some Models
-
261HEATER; Grid
-
272GASKET 93mm L x 98mm L;
-
281GROUND CABLE 150mm L; 150 mm Ground Wire
-
292WASHER 6.6mm ID x 12mm OD x 1.6mm Thk;
-
302NUT Hex, M6 x 1, Cl 10.9;
-
311CLAMP 3/4'', Insul, 1/2'' Bolt; (19 mm, M12 Bolt)
-
321BOLT Hex, M12 x 1.75 x 25mm, Cl 8.8, Full Thd;
-
331WASHER 13.5mm ID x 24mm OD x 3mm Thk;
-
1SERVICE KIT; Harness and One (1) Engine Crank Relay, Harness Removes Grid Heater Function During Engine Cranking, Includes One Each Ref 34 - 37, If Used
-
341WIRE HARNESS; Controller Harness, 6 End Connectors, Includes L71879 Diode, Cold Start Control, Attaches to Engine Harness, Used On Models With One (1) Engine Crank Relay (Ref 35), If Used
-
351-2RELAY 12V, 40 Amp; Mini, 12V, 40A, Engine Crank, If Used
-
361-2SCREW HWH, #10 - 32 x 1/2''; If Used
-
371-2NUT #10-32; If Used
-
381BRACKET; Cold Start, Used On Models With One (1) Crank Relay (Ref 35), If Used, Not Included In 87368411 Service Kit, Purchase Separately
-
38A1BRACKET 2mm Thk; Cold Start, Used On Models With Two (2) Crank Relays (Ref 35), If Used, Not Included In Service Kits, Purchase Separately
-
1SERVICE KIT; Harness and Two (2) Engine Crank Relays, Harness With Provisions to De-Activate the KKSB During Engine Cranking, Includes Ref 39 Harness W/Resistor and Two (2) Each Ref 35 - 37
-
391WIRE HARNESS; Controller Harness, 10 End Connectors, Includes (1) 87516581 Resistor and (1) L71879 Diode, Attaches to Engine Harness, Used On Models With Two (2) Engine Crank Relays (Ref 35), If Used
Select All
Select
Ref.
Qty
1Availability
Part #
87430868Description
SERVICE KIT; Grid Heater, Incl. Ref 1 - 33 and Instructions, Also Includes 8603092 Warning Decal, Explosion Hazard, Do Not Use Ether, If Used, No Longer Available, Order 87368406 Service KitImg
Alts
Select
Ref.
Qty
1Availability
Part #
87368406Description
SERVICE KIT; Grid Heater, Incl. Ref 2 - 23, 25 - 38 and Instructions, Also Includes 8603092 Warning Decal, Explosion Hazard, Incl (1) Relay (Ref 35) and Harness (Ref 34) With Diode Which Removes Grid Heater Function During Engine Cranking for Cold Start ControlImg
Alts
Select
Ref.
1Qty
1Availability
Part #
87410603Description
PLATE; Cold Start, Without Mounting Holes For Engine Crank Relay (Ref 35), If Used, Included in 87430868 KitImg
Alts
Select
Ref.
2Qty
1Availability
Part #
515-22190Description
CLAMP 3/4'', Insul, 5/16'' Bolt; (19 mm, M8 Bolt)Img
Alts
Select
Ref.
3Qty
3Availability
Part #
614-8040Description
BOLT Hex, M8 x 1.25 x 40mm, Cl 8.8, Full Thd;Img
Alts
Select
Ref.
4Qty
3Availability
Part #
407962A1Description
SPACER 9.8mm ID x 12.9mm OD x 11mm L;Img
Alts
Select
Ref.
5Qty
3Availability
Part #
238-5011Description
O-RING 0.07'' Thk x 0.301'' ID, -11, Cl 5, 75 Duro;Img
Alts
Select
Ref.
6Qty
3Availability
Part #
87417383Description
THREADED INSERT M8 x 1.25; M8 x 1-1/4Img
Alts
Select
Ref.
8Qty
1Availability
Part #
47132002Description
HEATER; Grid Heater, Replaces 87409046Img
Alts
Select
Ref.
9Qty
1Availability
Part #
440038A1Description
JUNCTION BLOCK Fuse; Fuse BlockImg
Alts
Select
Ref.
11Qty
2Availability
Part #
614-6035Description
BOLT Hex, M6 x 1 x 35mm, Cl 8.8, Full Thd;Img
Alts
Select
Ref.
12Qty
1Availability
Part #
87414237Description
PLATE 25mm W x 102mm L x 10mm Thk; 10 mm Thick Spacer BarImg
Alts
Select
Ref.
13Qty
3Availability
Part #
614-6020Description
BOLT Hex, M6 x 1 x 20mm, Cl 8.8, Full Thd;Img
Alts
Select
Ref.
14Qty
11Availability
Part #
895-11006Description
WASHER 6.6mm ID x 12mm OD x 1.6mm Thk;Img
Alts
Select
Ref.
16Qty
1Availability
Part #
811-6016Description
CARRIAGE BOLT Sht Sq Nk, M6 x 1 x 16mm, Cl 8.8;Img
Alts
Select
Ref.
19Qty
2Availability
Part #
322357Description
BELLEVILLE WASHER M6 Bolt Size x 14mm OD x 1.3mm Thk;Img
Alts
Select
Ref.
21Qty
1Availability
Part #
87410265Description
BAR; 90 mm Jumper Wire, Fuse RelayImg
Alts
Select
Ref.
22Qty
1Availability
Part #
87419616Description
CABLE ASSY.; 500 mm Wire, Relay to Grid HeaterImg
Alts
Select
Ref.
23Qty
1Availability
Part #
87419615Description
CABLE ASSY. 1250mm L; 1250 mm Wire, Starter to Fuse BlockImg
Alts
Select
Ref.
24Qty
1Availability
Part #
87433544Description
WIRE HARNESS; Controller Harness, 4 End Connectors, Cold Start Control, Attaches to Engine Harness, Without Diode Connection Or Crank Relay Connection, If Used, Included in 87430868 KitImg
Alts
Select
Ref.
25Qty
1Availability
Part #
L18337Description
CABLE TIE 9.95''-12.1'' lg; CABLE STRAP Replaces D150521 292 mm Long Nylon Tie Strap Used On Some ModelsImg
Alts
Select
Ref.
28Qty
1Availability
Part #
87413162Description
GROUND CABLE 150mm L; 150 mm Ground WireImg
Alts
Select
Ref.
29Qty
2Availability
Part #
895-11006Description
WASHER 6.6mm ID x 12mm OD x 1.6mm Thk;Img
Alts
Select
Ref.
31Qty
1Availability
Part #
515-25190Description
CLAMP 3/4'', Insul, 1/2'' Bolt; (19 mm, M12 Bolt)Img
Alts
Select
Ref.
32Qty
1Availability
Part #
614-12025Description
BOLT Hex, M12 x 1.75 x 25mm, Cl 8.8, Full Thd;Img
Alts
Select
Ref.
33Qty
1Availability
Part #
896-11012Description
WASHER 13.5mm ID x 24mm OD x 3mm Thk;Img
Alts
Select
Ref.
Qty
1Availability
Part #
87368411Description
SERVICE KIT; Harness and One (1) Engine Crank Relay, Harness Removes Grid Heater Function During Engine Cranking, Includes One Each Ref 34 - 37, If UsedImg
Alts
Select
Ref.
34Qty
1Availability
Part #
87368095Description
WIRE HARNESS; Controller Harness, 6 End Connectors, Includes L71879 Diode, Cold Start Control, Attaches to Engine Harness, Used On Models With One (1) Engine Crank Relay (Ref 35), If UsedImg
Alts
Select
Ref.
35Qty
1-2Availability
Part #
87436836Description
RELAY 12V, 40 Amp; Mini, 12V, 40A, Engine Crank, If UsedImg
Alts
Select
Ref.
36Qty
1-2Availability
Part #
87301687Description
SCREW HWH, #10 - 32 x 1/2''; If UsedImg
Alts
Select
Ref.
38Qty
1Availability
Part #
87362555Description
BRACKET; Cold Start, Used On Models With One (1) Crank Relay (Ref 35), If Used, Not Included In 87368411 Service Kit, Purchase SeparatelyImg
Alts
Select
Ref.
38AQty
1Availability
Part #
87397601Description
BRACKET 2mm Thk; Cold Start, Used On Models With Two (2) Crank Relays (Ref 35), If Used, Not Included In Service Kits, Purchase SeparatelyImg
Alts
Select
Ref.
Qty
1Availability
Part #
87397279Description
SERVICE KIT; Harness and Two (2) Engine Crank Relays, Harness With Provisions to De-Activate the KKSB During Engine Cranking, Includes Ref 39 Harness W/Resistor and Two (2) Each Ref 35 - 37Img
Alts
Select
Ref.
39Qty
1Availability
Part #
87396228Description
WIRE HARNESS; Controller Harness, 10 End Connectors, Includes (1) 87516581 Resistor and (1) L71879 Diode, Attaches to Engine Harness, Used On Models With Two (2) Engine Crank Relays (Ref 35), If UsedImg
Alts