PREVIOUS
-
026 - BACKHOE MOUNTING PARTS, USED ON MODELS WITHOUT DRAFT-O-MATIC
TABLE OF CONTENTS
DIAGRAM
PART LIST
Clear callout
Serial Number Window
Build Date
Select All
Ref.
Qty
Part #
Alts
Description
Image
  • 1
    1
    D30723
    X; SUPPORT ARM - lower R.H. (Early production) When stock is exhausted use D35940 support arm
  • 1
    D35940
    ARM; SUPPORT ARM - lower R.H. (Late production)
  • 2
    1
    D30722
    X; SUPPORT ARM - lower L.H. (Early production) When stock is exhausted use D35941 support arm
  • 1
    D35941
    ARM; SUPPORT ARM - lower L.H. (Late production)
  • 3
    2
    13-1236
    BOLT Hex, 3/4'' - 10 x 2-1/4'', Gr 5; 
  • 4
    2
    230-41112
    LOCK NUT 3/4''-10, GA; NUT - hex., lock (3/4'' - 10 NC)
  • 5
    2
    D31495
    BLOCK; NUT - wrench and hammer (Early production) If used
  • 6
    2
    D30714
    WASHER; - cone (Use with D31495 nut)
  • 7
    2
    D34027
    NUT; - star, special (Late production) If used
  • 8
    2
    D30726
    ARM; SUPPORT ARM - upper
  • 9
    2
    D32520
    STUD; ASSEMBLY - in loader frame, early production (Not shown) Use D37615
  • 2
    D24476
    X; BOLT - special, intermediate production (When stock is exhausted use D37615)
  • 2
    D37615
    BOLT; BOLT - special, late production
  • 10
    2
    25-1620
    NUT 1 1/4''-7, G5, Hvy; - hex. (1-1/4'' - 7 NC) Early production (If used)
  • 2
    25-1220
    SLOTTED NUT 1 1/4''-12, G5; NUT - hex., slotted (1-1/4'' - 7 NC) Late production (If used)
  • 11
    2
    132-157
    COTTER PIN Ext Prong Sq Cut, 1/4'' x 2 1/2''; Pin, Split (Cotter), , Used with D37615 1/4'' x 2 1/2''
  • 12
    2
    D31496
    SPECIAL NUT; NUT - wrench and hammer
  • 13
    2
    D30717
    WASHER; - cone, 15 degrees
  • 14
    2
    D30716
    BOLT; - special
  • 15
    1
    D31721
    X; SUPPORT ARM - lower R.H. (Used before serial number 4103251) Use D35943 support arm and D34027 nut, used on models with draft-o-matic
  • 16
    1
    D31722
    X; SUPPORT ARM - lower, L.H. (Used before serial number 4103251) Use D35944 support arm and D34023 nut, used on models with draft-o-matic
  • 17
    1
    13-1236
    BOLT Hex, 3/4'' - 10 x 2-1/4'', Gr 5; Used on models with Draft-o-matic Hex, 3/4''-10 x 2 1/4'', G5
  • 18
    2
    230-41112
    LOCK NUT 3/4''-10, GA; NUT - hex., lock (3/4'' - 10 NC), used on models with draft-o-matic
  • 19
    2
    B18206
    SNAP RING #87, Ext; Ring, Snap, (Early production) if used, used on models with draft-o-matic #87, Ext
  • 20
    2
    25-1010
    NUT 5/8''-11, G5; Late production (if used), used on models with Draft-o-matic 5/8''-11, G5
  • 21
    2
    92-10
    LOCK WASHER 5/8''; WASHER, LOCK, , Used on models with Draft-o-matic 5/8''
  • 22
    2
    95-10
    WASHER 5/8''; - plain (), used on models with draft-o-matic 5/8''
  • 23
    2
    B18206
    SNAP RING #87, Ext; Ring, Snap, , used on models with draft-o-matic #87, Ext
  • 24
    2
    D31495
    BLOCK; NUT - wrench and hammer (Early production) If used on models with draft-o-matic
  • 25
    2
    D30714
    WASHER; - cone, 15 degrees (Use with D31495 nut), used on models with draft-o-matic
  • 26
    2
    D34027
    NUT; - star, special (Late production) If used, used on models with draft-o-matic
  • 29
    2
    D32520
    STUD; ASSEMBLY - in loader frame (Early production) Not shown (Use D37615 bolt), used on models with draft-o-matic
  • 2
    D24476
    X; BOLT - special (Intermediate production) when stock is exhausted, use D37615 bolt, used on models with draft-o-matic
  • 2
    D37615
    BOLT; BOLT - special (Late production), used on models with draft-o-matic
  • 30
    2
    D30717
    WASHER; - cone, 15 degrees, used on models with draft-o-matic
  • 31
    2
    D31496
    SPECIAL NUT; NUT - wrench and hammer (Early production) Use with D32520, used on models with draft-o-matic
  • 32
    2
    25-1620
    NUT 1 1/4''-7, G5, Hvy; - hex. (1-1/4'' - 7 NC) Intermediate production (If used), used on models with draft-o-matic
  • 2
    25-1220
    SLOTTED NUT 1 1/4''-12, G5; NUT - hex., slotted (1-1/4'' - 7 NC) Use with D37615, used on models with draft-o-matic
  • 33
    2
    132-157
    COTTER PIN Ext Prong Sq Cut, 1/4'' x 2 1/2''; Pin, Split (Cotter), , Used on models with draft-o-matic 1/4'' x 2 1/2''
  • 34
    2
    D31496
    SPECIAL NUT; NUT - wrench and hammer, used on models with draft-o-matic
  • 35
    2
    D30717
    WASHER; - cone, 15 degrees, used on models with draft-o-matic
  • 36
    2
    D30716
    BOLT; - special, used on models with draft-o-matic
  • 38
    1
    D31720
    PIPE; LINK - transport, L.H., used on models with draft-o-matic
Select All

Select

Ref.

1

Qty

1

Availability

Part #

D30723

Description

X; SUPPORT ARM - lower R.H. (Early production) When stock is exhausted use D35940 support arm

Img

Alts

Select

Ref.

Qty

1

Availability

Part #

D35940

Description

ARM; SUPPORT ARM - lower R.H. (Late production)

Img

Alts

Select

Ref.

2

Qty

1

Availability

Part #

D30722

Description

X; SUPPORT ARM - lower L.H. (Early production) When stock is exhausted use D35941 support arm

Img

Alts

Select

Ref.

Qty

1

Availability

Part #

D35941

Description

ARM; SUPPORT ARM - lower L.H. (Late production)

Img

Alts

Select

Ref.

3

Qty

2

Availability

Part #

13-1236

Description

BOLT Hex, 3/4'' - 10 x 2-1/4'', Gr 5; 

Img

Alts

Select

Ref.

4

Qty

2

Availability

Part #

230-41112

Description

LOCK NUT 3/4''-10, GA; NUT - hex., lock (3/4'' - 10 NC)

Img

Alts

Select

Ref.

5

Qty

2

Availability

Part #

D31495

Description

BLOCK; NUT - wrench and hammer (Early production) If used

Img

Alts

Select

Ref.

6

Qty

2

Availability

Part #

D30714

Description

WASHER; - cone (Use with D31495 nut)

Img

Alts

Select

Ref.

7

Qty

2

Availability

Part #

D34027

Description

NUT; - star, special (Late production) If used

Img

Alts

Select

Ref.

8

Qty

2

Availability

Part #

D30726

Description

ARM; SUPPORT ARM - upper

Img

Alts

Select

Ref.

9

Qty

2

Availability

Part #

D32520

Description

STUD; ASSEMBLY - in loader frame, early production (Not shown) Use D37615

Img

Alts

Select

Ref.

Qty

2

Availability

Part #

D24476

Description

X; BOLT - special, intermediate production (When stock is exhausted use D37615)

Img

Alts

Select

Ref.

Qty

2

Availability

Part #

D37615

Description

BOLT; BOLT - special, late production

Img

Alts

Select

Ref.

10

Qty

2

Availability

Part #

25-1620

Description

NUT 1 1/4''-7, G5, Hvy; - hex. (1-1/4'' - 7 NC) Early production (If used)

Img

Alts

Select

Ref.

Qty

2

Availability

Part #

25-1220

Description

SLOTTED NUT 1 1/4''-12, G5; NUT - hex., slotted (1-1/4'' - 7 NC) Late production (If used)

Img

Alts

Select

Ref.

11

Qty

2

Availability

Part #

132-157

Description

COTTER PIN Ext Prong Sq Cut, 1/4'' x 2 1/2''; Pin, Split (Cotter), , Used with D37615 1/4'' x 2 1/2''

Img

Alts

Select

Ref.

12

Qty

2

Availability

Part #

D31496

Description

SPECIAL NUT; NUT - wrench and hammer

Img

Alts

Select

Ref.

13

Qty

2

Availability

Part #

D30717

Description

WASHER; - cone, 15 degrees

Img

Alts

Select

Ref.

14

Qty

2

Availability

Part #

D30716

Description

BOLT; - special

Img

Alts

Select

Ref.

15

Qty

1

Availability

Part #

D31721

Description

X; SUPPORT ARM - lower R.H. (Used before serial number 4103251) Use D35943 support arm and D34027 nut, used on models with draft-o-matic

Img

Alts

Select

Ref.

16

Qty

1

Availability

Part #

D31722

Description

X; SUPPORT ARM - lower, L.H. (Used before serial number 4103251) Use D35944 support arm and D34023 nut, used on models with draft-o-matic

Img

Alts

Select

Ref.

17

Qty

1

Availability

Part #

13-1236

Description

BOLT Hex, 3/4'' - 10 x 2-1/4'', Gr 5; Used on models with Draft-o-matic Hex, 3/4''-10 x 2 1/4'', G5

Img

Alts

Select

Ref.

18

Qty

2

Availability

Part #

230-41112

Description

LOCK NUT 3/4''-10, GA; NUT - hex., lock (3/4'' - 10 NC), used on models with draft-o-matic

Img

Alts

Select

Ref.

19

Qty

2

Availability

Part #

B18206

Description

SNAP RING #87, Ext; Ring, Snap, (Early production) if used, used on models with draft-o-matic #87, Ext

Img

Alts

Select

Ref.

20

Qty

2

Availability

Part #

25-1010

Description

NUT 5/8''-11, G5; Late production (if used), used on models with Draft-o-matic 5/8''-11, G5

Img

Alts

Select

Ref.

21

Qty

2

Availability

Part #

92-10

Description

LOCK WASHER 5/8''; WASHER, LOCK, , Used on models with Draft-o-matic 5/8''

Img

Alts

Select

Ref.

22

Qty

2

Availability

Part #

95-10

Description

WASHER 5/8''; - plain (), used on models with draft-o-matic 5/8''

Img

Alts

Select

Ref.

23

Qty

2

Availability

Part #

B18206

Description

SNAP RING #87, Ext; Ring, Snap, , used on models with draft-o-matic #87, Ext

Img

Alts

Select

Ref.

24

Qty

2

Availability

Part #

D31495

Description

BLOCK; NUT - wrench and hammer (Early production) If used on models with draft-o-matic

Img

Alts

Select

Ref.

25

Qty

2

Availability

Part #

D30714

Description

WASHER; - cone, 15 degrees (Use with D31495 nut), used on models with draft-o-matic

Img

Alts

Select

Ref.

26

Qty

2

Availability

Part #

D34027

Description

NUT; - star, special (Late production) If used, used on models with draft-o-matic

Img

Alts

Select

Ref.

29

Qty

2

Availability

Part #

D32520

Description

STUD; ASSEMBLY - in loader frame (Early production) Not shown (Use D37615 bolt), used on models with draft-o-matic

Img

Alts

Select

Ref.

Qty

2

Availability

Part #

D24476

Description

X; BOLT - special (Intermediate production) when stock is exhausted, use D37615 bolt, used on models with draft-o-matic

Img

Alts

Select

Ref.

Qty

2

Availability

Part #

D37615

Description

BOLT; BOLT - special (Late production), used on models with draft-o-matic

Img

Alts

Select

Ref.

30

Qty

2

Availability

Part #

D30717

Description

WASHER; - cone, 15 degrees, used on models with draft-o-matic

Img

Alts

Select

Ref.

31

Qty

2

Availability

Part #

D31496

Description

SPECIAL NUT; NUT - wrench and hammer (Early production) Use with D32520, used on models with draft-o-matic

Img

Alts

Select

Ref.

32

Qty

2

Availability

Part #

25-1620

Description

NUT 1 1/4''-7, G5, Hvy; - hex. (1-1/4'' - 7 NC) Intermediate production (If used), used on models with draft-o-matic

Img

Alts

Select

Ref.

Qty

2

Availability

Part #

25-1220

Description

SLOTTED NUT 1 1/4''-12, G5; NUT - hex., slotted (1-1/4'' - 7 NC) Use with D37615, used on models with draft-o-matic

Img

Alts

Select

Ref.

33

Qty

2

Availability

Part #

132-157

Description

COTTER PIN Ext Prong Sq Cut, 1/4'' x 2 1/2''; Pin, Split (Cotter), , Used on models with draft-o-matic 1/4'' x 2 1/2''

Img

Alts

Select

Ref.

34

Qty

2

Availability

Part #

D31496

Description

SPECIAL NUT; NUT - wrench and hammer, used on models with draft-o-matic

Img

Alts

Select

Ref.

35

Qty

2

Availability

Part #

D30717

Description

WASHER; - cone, 15 degrees, used on models with draft-o-matic

Img

Alts

Select

Ref.

36

Qty

2

Availability

Part #

D30716

Description

BOLT; - special, used on models with draft-o-matic

Img

Alts

Select

Ref.

38

Qty

1

Availability

Part #

D31720

Description

PIPE; LINK - transport, L.H., used on models with draft-o-matic

Img

Alts