DIA KIT, HARVESTER - 51644482

51644482 - Blow-Off Kit to Clean Engine Area - NEW HOLLAND CONSTRUCTION

Part # 51644482

Check if this Part Fits Your Equipment

Blow-Off Kit #51644482 provides two perforated and rotating pressurized tubes. Every two minutes, for 5 seconds, these tubes blast air at 8.7 bar to remove dust from the engine area. During their operation cycle, the air tubes swivel back and forth 120°. This rotation is obtained by an electric motor and a cranking linkage. The kit requires an engine air compressor.

*This item is a Dealer Installed Accessory.

Package Weight:
  • 27.0 kg
Package Length:
  • 1600 mm
Package Width:
  • 300 mm
Package Height:
  • 850 mm
Package Quantity
  • 1

Blow-Off Kit #51644482 provides two perforated and rotating pressurized tubes. Every two minutes, for 5 seconds, these tubes blast air at 8.7 bar to remove dust from the engine area. During their operation cycle, the air tubes swivel back and forth 120°. This rotation is obtained by an electric motor and a cranking linkage. The kit requires an engine air compressor.

*This item is a Dealer Installed Accessory.

This part is used in the following kits and product bundles:

Part Number
Description
Quantity

This part is used in the following kits and product bundles:

  • Part Number
    #XXXXXX
    Description
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Quantity
    3
  • Part Number
    #XXXXXX
    Description
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Quantity
    3
  • Part Number
    #XXXXXX
    Description
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Quantity
    3
  • Part Number
    #XXXXXX
    Description
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Quantity
    3
  • Part Number
    #XXXXXX
    Description
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Quantity
    3
  • Part Number
    #XXXXXX
    Description
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Quantity
    3

This part is used in the following kits and product bundles:

  • Part Number
    #XXXXXX
    Description
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Quantity
    3
  • Part Number
    #XXXXXX
    Description
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Quantity
    3
  • Part Number
    #XXXXXX
    Description
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Quantity
    3
  • Part Number
    #XXXXXX
    Description
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Quantity
    3
  • Part Number
    #XXXXXX
    Description
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Quantity
    3
  • Part Number
    #XXXXXX
    Description
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Quantity
    3

This part is used in the following kits and product bundles:

Type
Part Number
Description

This part is used in the following kits and product bundles:

  • Type
    Kit
    Part Number
    #XXXXXX
    Description
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Type
    Kit
    Part Number
    #XXXXXX
    Description
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Type
    Kit
    Part Number
    #XXXXXX
    Description
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Type
    Kit
    Part Number
    #XXXXXX
    Description
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Type
    Kit
    Part Number
    #XXXXXX
    Description
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Type
    Kit
    Part Number
    #XXXXXX
    Description
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.

There are no fitments for this product.

    Check fitment and access technical drawings #51644482

  • Model Name
  • EQUIPMENT FITMENT
  • Product Type
  • Product Line

Designed to guarantee top performance in all weather conditions, choose Alternator #84141452 for your tractor and harvesting equipment

High Power
  • New generation able to supply high eleltrical demand
  • optimal charging speed at all temperatures
Maintenance Free
  • Superior design to ensure long lifespan with zero maintenance
High Power
  • New generation able to supply high eleltrical demand
  • optimal charging speed at all temperatures
Maintenance Free
  • Superior design to ensure long lifespan with zero maintenance

Blow-Off Kit #51644482 provides two perforated and rotating pressurized tubes. Every two minutes, for 5 seconds, these tubes blast air at 8.7 bar to remove dust from the engine area. During their operation cycle, the air tubes swivel back and forth 120°. This rotation is obtained by an electric motor and a cranking linkage. The kit requires an engine air compressor.

*This item is a Dealer Installed Accessory.

Package Weight:
  • 27.0 kg
Package Length:
  • 1600 mm
Package Width:
  • 300 mm
Package Height:
  • 850 mm
Package Quantity
  • 1

This part is used in the following kits and product bundles:

Part Number
Description
Quantity
  • #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    3
  • #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    3
  • #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    3
  • #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    3
  • #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    3
  • #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    3

This part is used in the following kits and product bundles:

  • Part Number
    120056
    Description
    Hex Bolt - Cl 8.8 - M6 x 50.
    Quantity
    1
  • Part Number
    120104
    Description
    Hex Bolt - Full Thread - M8 x 20 mm L.
    Quantity
    9
  • Part Number
    120242
    Description
    SET SCREW.
    Quantity
    2
  • Part Number
    300645
    Description
    CIRCLIP.
    Quantity
    2
  • Part Number
    300647
    Description
    Snap Ring - 51.6 mm OD x 1.75 mm Thk.
    Quantity
    2
  • Part Number
    300868
    Description
    PIN.
    Quantity
    1
  • Part Number
    9516263
    Description
    FITTING.
    Quantity
    2
  • Part Number
    9706748
    Description
    P-Type Clamp - Coated - 15.9 mm W.
    Quantity
    1
  • Part Number
    322357
    Description
    Belleville Washer - 14 mm OD x 1.3 mm Thk.
    Quantity
    10
  • Part Number
    322358
    Description
    Belleville Lock Washer - M8 Bolt Size x 18mm OD x 1.4mm Thick.
    Quantity
    11
  • Part Number
    86566989
    Description
    Cable Tie - Black - 208 mm L x 4.8 mm W.
    Quantity
    9
  • Part Number
    335168
    Description
    FERRULE.
    Quantity
    4
  • Part Number
    335170
    Description
    TUERCA DE UNION.
    Quantity
    4
  • Part Number
    338413
    Description
    PERNO.
    Quantity
    2
  • Part Number
    86629499
    Description
    Cojinete de bolas con muesca profunda - 20 mm de diámetro interno × 42 mm de diámetro externo × 12 mm de ancho.
    Quantity
    2
  • Part Number
    370016
    Description
    ANILLO DE RESORTE.
    Quantity
    2
  • Part Number
    86639313
    Description
    ARANDELA.
    Quantity
    1
  • Part Number
    378246
    Description
    ARANDELA.
    Quantity
    2
  • Part Number
    86977790
    Description
    Pero hexagonal - Cl 8.8 - M6 x 1 x 45.
    Quantity
    2
  • Part Number
    84432361
    Description
    TUBO.
    Quantity
    1
  • Part Number
    84021569
    Description
    ANILLO DE CIERRE.
    Quantity
    2
  • Part Number
    84021570
    Description
    ANILLO DE CIERRE.
    Quantity
    2
  • Part Number
    84022290
    Description
    VÁLVULA HIDRÁULICA.
    Quantity
    1
  • Part Number
    84036064
    Description
    Filtro neumático - 190 mm de largo x 60 mm de alto x 60 mm de ancho.
    Quantity
    1
  • Part Number
    412439
    Description
    Rótula cable - Zincada - 39 mm de largo × 19 mm de ancho.
    Quantity
    2
  • Part Number
    84042903
    Description
    RACOR EN T.
    Quantity
    2
  • Part Number
    727874
    Description
    Cojinete de bolas con muesca profunda - 6303 - 17 mm de diámetro interno × 47 mm de diámetro externo × 14 mm de ancho.
    Quantity
    2
  • Part Number
    433007
    Description
    Abrazadera.
    Quantity
    6
  • Part Number
    433100
    Description
    SOPORTE.
    Quantity
    3
  • Part Number
    43362
    Description
    Tuerca hexagonal - Cl 10 - M8 x 1,25.
    Quantity
    5
  • Part Number
    84168531
    Description
    GUÍA.
    Quantity
    2
  • Part Number
    84264205
    Description
    MUELLE COMPRESOR.
    Quantity
    2
  • Part Number
    895-30100
    Description
    ARANDELA.
    Quantity
    4

This part is used in the following kits and product bundles:

Type
Part Number
Description
  • Kit
    #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Kit
    #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Kit
    #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Kit
    #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Kit
    #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Kit
    #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.

This part is used in the following kits and product bundles:

There are no fitments for this product.

    Check fitment and access technical drawings #51644482

DELIVERY INFO

Select a dealer to see delivery options

Qty

1
ADD TO CART