TABLE DES MATIÈRES
SCHÉMA
LISTE DES PIÈCES
EFFACER TOUT
Sélectionner Tout
Ref.
Qté
N° de pièce
Alts
Description
Image
-
11POULIE 251.46mm OD; Sheave, Refer to Fig. 4
-
21COURROIE V-Belt, 0.88in W x 83.75in L; Refer to Fig. 4
-
31POULIE DE RENVOI; Idler
-
1VIS A TETE BOMBEE Sq Nk, 1/2'' - 13 x 2 1/2'', Gr 5;
-
1ENTRETOISE 14.6 mm ID x 35.17 mm OD x 3.4 mm Thk;
-
ARRONDELLE 0.56'' ID x 1.38'' OD x 0.11'' Thk;
-
1RONDELLE FREIN 1/20.507 CST ZND;
-
1ECROU 1/2''-13, G5;
-
41ENTRETOISE; Spacer
-
51ARBRE; Wobble Shaft
-
5A1BOITIER CONVERTISSEU; Shaft, Wobble;215875 Wobble includes Refs. 5 thru 30 plus belt 214252, which must be replaced by belt 225915, Ref. 2, for use on the 472 or 478.;BSN 901824
-
5A1BOITIER CONVERTISSEU; Wobble Box, Shaft;Not shown;87029643 Wobble includes Refs. 5 thru 29 plus belt 225915;ASN 901824
-
61SUPPORT; Support;Welded Bearing Support;BSN 901824
-
61SUPPORT; Support;Cast Bearing Support;ASN 901824
-
2VIS 1/2''-13 x 1.813'' OAL, Gr 5;
-
1VIS Hex, 5/8'' - 11 x 1-3/4'', Gr 5;
-
2VIS Hex, 5/8'' - 11 x 4'', Gr 5;
-
1VIS A TETE BOMBEE Sht Sq Nk, 5/8'' - 11 x 3 3/4'', Gr 5;
-
2RONDELLE FREIN 1/20.507 CST ZND;
-
2RONDELLE 0.56'' ID x 1.38'' OD x 0.11'' Thk;
-
2ECROU 1/2''-13, G5;
-
4RONDELLE FREIN 5/8'' ID x 0.634'' OD x .156'' Thk CST ZND;
-
3ECROU Hex, 5/8'' - 11, Gr 5;
-
71TUYAU 1/8'' NPT x 1/8'' NPT; Line, Grease
-
81RACCORD 1/8'' - 27 NPT x 1/8'' - 27 NPT; Pipe, 1/8''
-
91GRAISSEUR 1/8'' NPT;
-
102CUVETTE DE ROULEMENT 82.58mm OD x 16.51mm W;
-
112CONE DE ROULEMENT 50mm ID x 21.5mm W;
-
122CUVETTE DE ROULEMENT 59.16mm OD x 11.94mm W;
-
132CONE DE ROULEMENT 35 mm ID x 16.764 mm;
-
142RONDELLE .766'' ID x 1.075'' OD;
-
152ECROU A CRENEAUX 3/4''-16;
-
2GOUPILLE FENDUE 1/8'' OD x 1-1/4'' OAL;
-
162CAPUCHON DE MOYEU;
-
171SEAL 63.5mm ID x 82.75mm OD x 6.76mm Thk;
-
181MOYEU;
-
192ROULEMENT ROULEAUX CYL. 0.7505'' ID x 1.825'' OD x 0.655'';
-
202CUVETTE DE ROULEMENT 45.26mm OD x 12.06mm W;
-
21ARCALE .003'' Thk;
-
ARCALE .005'' Thk;
-
ARCALE .0075 Thk;
-
ARCALE; .020''
-
222COUVERCLE; Bearing Retainer
-
2GRAISSEUR 90 Degree, 1/4'' NPT x 3/4'' L, Drive;
-
4VIS Hex, 3/8'' - 16 x 1 1/4'', Gr 5;
-
4RONDELLE FREIN 3/8 0.381 CST ZND;
-
231CHAPE; Yoke, Includes: Ref. 24;BSN 901824
-
231CHAPE; Yoke, Includes: Ref. 24;One-piece;ASN 901824
-
241BAGUE 12.75mm ID x 25.4mm OD x 21.44mm L;
-
251ROULEMENT A BILLES 25.4mm ID x 52mm OD x 15mm W;
-
261COLLIER; Bearing
-
271GASKET;
-
281CHAPEAU DE ROULEMENT 2.187'' ID x 4.25'' OD x 0.25''; Bearing
-
1GRAISSEUR FITTING LUBE 1/4-28 SPCL TAP;
-
2VIS Hex, 3/8'' - 16 x 1'', Gr 5;
-
2RONDELLE FREIN 3/8 0.381 CST ZND;
-
291SUPPORT; Pivot Arm;Welded;BSN 901824
-
291SUPPORT; Pivot Arm;Cast;ASN 901824
-
3VIS 1/2'' - 13 x 1-1/4'', Full Thd, Gr 5;
-
3RONDELLE 0.53'' ID x 1.06'' OD x 0.1'' Thk;
-
3RONDELLE FREIN 1/20.507 CST ZND;
-
301ENTRETOISE; BSN Only, Not Used ASN
-
311COUTEAU; Smooth, Riveted, Includes: Ref. 32, 34, 35 & 37 - 41;BSN 644501
-
1COUTEAU; Smooth, Bolted, Includes: Ref. 32, 34, 35 & 37 - 41;BSN 644501
-
1COUTEAU; Underserr, Riveted, Includes: 32, 34, 35 & 37 - 41;BSN 644501
-
1COUTEAU; Underserr, Bolted, Includes: Ref. 32, 34, 35 & 37 - 41;BSN & ASN 644501
-
1COUTEAU; Overserr, Riveted, Includes: Ref. 32, 34, 35, 36, 37 (9622744), 38 (9622715), 39, 40 & 41;ASN 644502
-
1COUTEAU; Overserr, Bolted, Includes: Ref. 32, 34, 35, 36, 37 (9622744), 38 (9622715), 39, 40 & 41;ASN 644502
-
321TETE DE LAME;
-
331VIS Hex, 1/2'' - 20 x 4'', Gr 8;
-
1ECROU 1/2''-20, GC;
-
341VIS Hex, 3/8'' - 16 x 2-1/2'', Gr 5;
-
2RONDELLE 10.3mm ID x 22.2mm OD x 2.7mm Thk, HTS, ZND; (3/8'')
-
1CONTRE-ECROU PREVAILING TORQUE, 3/8'' - 16, Gr C, Directional;
-
351BAGUE 12.7mm ID x 46.15mm OD x 58.98mm L; Rubber, Knife Head
-
361SECTION DE COUTEAU; BSN 644501
-
1PAS VENDU SÉPARÉMENT; Knifeback;ASN 644502
-
3729SECTION DE COUTEAU; Smooth;BSN 644501
-
28SECTION DE COUTEAU; Smooth;ASN 644502
-
29SECTION DE COUTEAU; Underserr, Black;BSN 644501
-
28SECTION DE COUTEAU; Underserr, Black;ASN 644502
-
29SECTION DE COUTEAU; Underserr, Chrome;BSN 644501
-
28SECTION DE COUTEAU; Underserr, Chrome;ASN 644502
-
24SECTION DE COUTEAU 14 SPI, OVERSERRATED CUTITNG EDGE, OIL PROTECTIVE FINISH, STRAIGHT THRU MOUNTING HOLES; Overserrated
-
381SECTION DE COUTEAU; half, Knife;BSN 644501
-
1SECTION DE COUTEAU; End, Underserrated, Full Section + Half Section;ASN 644502
-
1SECTION DE COUTEAU; End, RH, Overserr
-
3950RIVET Button, 5.33mm OD x 15.75mm L; Button Hd, #5-1/2, 7/32''x 5/8'';Rivets are available in Rivet Assortment 70622, which includes: (75) 46436, (12) 65744, (6) 120436, & (7) 13736 CSK Rivets #5, 1/2'' 9/16''.
-
ARKIT; Bolts & Nuts, 5/8'', Knife, Includes: (50) Nuts & (50) Bolts
-
404RIVET Button, 8.28mm OD x 23.8mm L; Button Hd, #5-1/2 , 7/32''x 15/16'';Rivets are available in Rivet Assortment 70622, which includes: (75) 46436, (12) 65744, (6) 120436, & (7) 13736 CSK Rivets #5, 1/2'' 9/16''.
-
ARKIT; Bolts & Nuts, 7/8'', Knife, Includes: (25) Nuts & (25) Bolts
-
415RIVET Button, 8.28mm OD x 30.2mm L; Button Hd, #5-1/2, 7/32''x 1-3/16'';Rivets are available in Rivet Assortment 70622, which includes: (75) 46436, (12) 65744, (6) 120436, & (7) 13736 CSK Rivets #5, 1/2'' 9/16''.
-
5KIT; Kit, 1-1/8'', Knife
-
421COLLIER; Knife End, Riveted Knife;Refs. 45 - 53 may be used as optional items in lieu of Refs. 42 - 44.
-
-PINCE LAME; End, Bolted Knife;Refs. 45 - 53 may be used as optional items in lieu of Refs. 42 - 44.
-
435PINCE LAME; Low, Riveted Knife;Refs. 45 - 53 may be used as optional items in lieu of Refs. 42 - 44.
-
5PINCE LAME; High, Bollted Knife;Refs. 45 - 53 may be used as optional items in lieu of Refs. 42 - 44.
-
5PINCE LAME; High, Bolted Knife, Requires 139188 Shim;Refs. 45 - 53 may be used as optional items in lieu of Refs. 42 - 44.
-
5CALE .090'' Thk; Refs. 45 - 53 may be used as optional items in lieu of Refs. 42 - 44.
-
4414GUARD; Double, Std., Gray;Refs. 45 - 53 may be used as optional items in lieu of Refs. 42 - 44.
-
4414GUARD; Double, Std., Yellow;Refs. 45 - 53 may be used as optional items in lieu of Refs. 42 - 44.
-
1VIS Hex, 7/16'' - 14 x 1 1/4'', Gr 5, Full Thd;
-
1VIS A TETE BOMBEE Sq Nk, 7/16'' - 14 x 1 3/4'', Gr 5;
-
28ECROU 7/16''-14, G5;
-
16VIS A TETE BOMBEE Sq Nk, 7/16'' - 14 x 1 1/2'', Gr 5;
-
10VIS A TETE BOMBEE Sq Nk, 7/16'' - 14 x 1 1/4'', Gr 5, Full Thd;
-
451GUARD; Stub, Special, RH;Applicable to Machines W/Stub Guards; (SN Break) From 1
-
1VIS A TETE BOMBEE Sq Nk, 7/16'' - 14 x 2'', Gr 5;
-
1RONDELLE 0.56'' ID x 1.38'' OD x 0.11'' Thk;
-
2ECROU 7/16''-14, G5;
-
462GUARD; End, Gray
-
462GUARD; Yellow
-
2VIS Hex, 7/16'' - 14 x 1 1/4'', Gr 5, Full Thd; Use W/PN 86521589, End Guard
-
2VIS A TETE BOMBEE Sq Nk, 7/16'' - 14 x 1 3/4'', Gr 5;
-
2ECROU 7/16''-14, G5;
-
4713GUARD; Stub, Double;Applicable to Machines W/Stub Guards
-
2VIS A TETE BOMBEE Sq Nk, 7/16'' - 14 x 2'', Gr 5;
-
24VIS A TETE BOMBEE Sq Nk, 7/16'' - 14 x 1 1/2'', Gr 5;
-
26ECROU 7/16''-14, G5;
-
481GUARD; Stub, Special, LH;Applicable to Machines W/Stub Guards
-
1VIS A TETE BOMBEE Sq Nk, 7/16'' - 14 x 2'', Gr 5;
-
1VIS Hex, 7/16'' - 14 x 1 1/4'', Gr 5, Full Thd;
-
2ECROU 7/16''-14, G5;
-
491COLLIER; Hold-down, Stub Guards, R.H. End;Applicable to Machines W/Stub Guards;Used with Riveted Knife
-
1PINCE LAME; Hold-down, Stub Guards, R.H. End;Applicable to Machines W/Stub Guards;Used with Bolted Knife
-
503PINCE LAME; Holddown, High;Applicable to Machines W/Stub Guards;Used with Riveted Knife
-
3PINCE LAME; Hold-down, Stub Guards, High;Applicable to Machines W/Stub Guards;Used with Bolted Knife
-
5111COLLIER; Hold-down, High, Used w/(3) Ref. 49;Applicable to Machines W/Stub Guards;Used with Riveted Knife
-
5111PINCE LAME; Holddown, High;Applicable to Machines W/Stub Guards;Used with Bolted Knife
-
5214CALE 26.99mm OD x 0.25mm Thk; 1-1/4'' x 4-1/4'' x .010'';Applicable to Machines W/Stub Guards
-
5328CALE; 1'' x 4'' x .036'';Applicable to Machines W/Stub Guards
-
54ARKIT; Kit, Knife Head;Kit consists of (25) 848083 Lock Nuts, (11) 84805 1'' Knife Bolts, (9) 851735 7/8'' Knife Bolts & (5) 1-1/8'' 851736 Knife Bolts.
-
551KIT; Adjustable Hold Down, Includes Ref 56 - 62, Standard on machines ASN
-
561PINCE LAME Heat Treated;
-
571PINCE LAME; Pressure Bar
-
581BOULON DE CHARRUE 3/8'' - 16 x 1 1/8'' , Gr 5;
-
591ECROU A EMBASE Flg, 3/8'' - 16;
-
601CALE 26.99mm OD x 0.25mm Thk; 0.010''
-
611CALE .090'' Thk;
-
621CALE; 0.060''
-
63ARKIT; Underserrated, RH, End, Includes: Ref. 38 (2), Bolts (6) & Nuts (6)
-
64ARKIT; Overserrated, RH, End, Includes: Ref. 38 (2), Bolts (6) & Nuts (6)
Sélectionner Tout
Ref.
1Qté
1Disponibilité
N° de pièce
221126Description
POULIE 251.46mm OD; Sheave, Refer to Fig. 4Img
Alts
Ref.
2Qté
1Disponibilité
N° de pièce
225915Description
COURROIE V-Belt, 0.88in W x 83.75in L; Refer to Fig. 4Img
Alts
Ref.
Qté
1Disponibilité
N° de pièce
280435Description
VIS A TETE BOMBEE Sq Nk, 1/2'' - 13 x 2 1/2'', Gr 5;Img
Alts
Ref.
Qté
1Disponibilité
N° de pièce
143479Description
ENTRETOISE 14.6 mm ID x 35.17 mm OD x 3.4 mm Thk;Img
Alts
Ref.
Qté
ARDisponibilité
N° de pièce
80700Description
RONDELLE 0.56'' ID x 1.38'' OD x 0.11'' Thk;Img
Alts
Ref.
5AQté
1Disponibilité
N° de pièce
215875Description
BOITIER CONVERTISSEU; Shaft, Wobble;215875 Wobble includes Refs. 5 thru 30 plus belt 214252, which must be replaced by belt 225915, Ref. 2, for use on the 472 or 478.;BSN 901824Img
Alts
Ref.
5AQté
1Disponibilité
N° de pièce
87029643Description
BOITIER CONVERTISSEU; Wobble Box, Shaft;Not shown;87029643 Wobble includes Refs. 5 thru 29 plus belt 225915;ASN 901824Img
Alts
Ref.
6Qté
1Disponibilité
N° de pièce
285289Description
SUPPORT; Support;Welded Bearing Support;BSN 901824Img
Alts
Ref.
6Qté
1Disponibilité
N° de pièce
86554193Description
SUPPORT; Support;Cast Bearing Support;ASN 901824Img
Alts
Ref.
Qté
1Disponibilité
N° de pièce
9627896Description
VIS Hex, 5/8'' - 11 x 1-3/4'', Gr 5;Img
Alts
Ref.
Qté
1Disponibilité
N° de pièce
88420Description
VIS A TETE BOMBEE Sht Sq Nk, 5/8'' - 11 x 3 3/4'', Gr 5;Img
Alts
Ref.
Qté
2Disponibilité
N° de pièce
80700Description
RONDELLE 0.56'' ID x 1.38'' OD x 0.11'' Thk;Img
Alts
Ref.
Qté
4Disponibilité
N° de pièce
86729275Description
RONDELLE FREIN 5/8'' ID x 0.634'' OD x .156'' Thk CST ZND;Img
Alts
Ref.
7Qté
1Disponibilité
N° de pièce
124160Description
TUYAU 1/8'' NPT x 1/8'' NPT; Line, GreaseImg
Alts
Ref.
8Qté
1Disponibilité
N° de pièce
91932Description
RACCORD 1/8'' - 27 NPT x 1/8'' - 27 NPT; Pipe, 1/8''Img
Alts
Ref.
10Qté
2Disponibilité
N° de pièce
287066Description
CUVETTE DE ROULEMENT 82.58mm OD x 16.51mm W;Img
Alts
Ref.
11Qté
2Disponibilité
N° de pièce
199954Description
CONE DE ROULEMENT 50mm ID x 21.5mm W;Img
Alts
Ref.
12Qté
2Disponibilité
N° de pièce
175508Description
CUVETTE DE ROULEMENT 59.16mm OD x 11.94mm W;Img
Alts
Ref.
13Qté
2Disponibilité
N° de pièce
175507Description
CONE DE ROULEMENT 35 mm ID x 16.764 mm;Img
Alts
Ref.
Qté
2Disponibilité
N° de pièce
87395Description
GOUPILLE FENDUE 1/8'' OD x 1-1/4'' OAL;Img
Alts
Ref.
17Qté
1Disponibilité
N° de pièce
223297Description
SEAL 63.5mm ID x 82.75mm OD x 6.76mm Thk;Img
Alts
Ref.
19Qté
2Disponibilité
N° de pièce
67372Description
ROULEMENT ROULEAUX CYL. 0.7505'' ID x 1.825'' OD x 0.655'';Img
Alts
Ref.
20Qté
2Disponibilité
N° de pièce
36725Description
CUVETTE DE ROULEMENT 45.26mm OD x 12.06mm W;Img
Alts
Ref.
Qté
2Disponibilité
N° de pièce
87415Description
GRAISSEUR 90 Degree, 1/4'' NPT x 3/4'' L, Drive;Img
Alts
Ref.
Qté
4Disponibilité
N° de pièce
88011Description
VIS Hex, 3/8'' - 16 x 1 1/4'', Gr 5;Img
Alts
Ref.
23Qté
1Disponibilité
N° de pièce
706022Description
CHAPE; Yoke, Includes: Ref. 24;BSN 901824Img
Alts
Ref.
23Qté
1Disponibilité
N° de pièce
86596555Description
CHAPE; Yoke, Includes: Ref. 24;One-piece;ASN 901824Img
Alts
Ref.
24Qté
1Disponibilité
N° de pièce
127637Description
BAGUE 12.75mm ID x 25.4mm OD x 21.44mm L;Img
Alts
Ref.
25Qté
1Disponibilité
N° de pièce
134130Description
ROULEMENT A BILLES 25.4mm ID x 52mm OD x 15mm W;Img
Alts
Ref.
28Qté
1Disponibilité
N° de pièce
134485Description
CHAPEAU DE ROULEMENT 2.187'' ID x 4.25'' OD x 0.25''; BearingImg
Alts
Ref.
Qté
1Disponibilité
N° de pièce
87414Description
GRAISSEUR FITTING LUBE 1/4-28 SPCL TAP;Img
Alts
Ref.
29Qté
1Disponibilité
N° de pièce
134142Description
SUPPORT; Pivot Arm;Welded;BSN 901824Img
Alts
Ref.
29Qté
1Disponibilité
N° de pièce
86549599Description
SUPPORT; Pivot Arm;Cast;ASN 901824Img
Alts
Ref.
Qté
3Disponibilité
N° de pièce
87670Description
VIS 1/2'' - 13 x 1-1/4'', Full Thd, Gr 5;Img
Alts
Ref.
Qté
3Disponibilité
N° de pièce
87364Description
RONDELLE 0.53'' ID x 1.06'' OD x 0.1'' Thk;Img
Alts
Ref.
30Qté
1Disponibilité
N° de pièce
134139Description
ENTRETOISE; BSN Only, Not Used ASNImg
Alts
Ref.
31Qté
1Disponibilité
N° de pièce
648833Description
COUTEAU; Smooth, Riveted, Includes: Ref. 32, 34, 35 & 37 - 41;BSN 644501Img
Alts
Ref.
Qté
1Disponibilité
N° de pièce
858709Description
COUTEAU; Smooth, Bolted, Includes: Ref. 32, 34, 35 & 37 - 41;BSN 644501Img
Alts
Ref.
Qté
1Disponibilité
N° de pièce
648832Description
COUTEAU; Underserr, Riveted, Includes: 32, 34, 35 & 37 - 41;BSN 644501Img
Alts
Ref.
Qté
1Disponibilité
N° de pièce
858708Description
COUTEAU; Underserr, Bolted, Includes: Ref. 32, 34, 35 & 37 - 41;BSN & ASN 644501Img
Alts
Ref.
Qté
1Disponibilité
N° de pièce
9623792Description
COUTEAU; Overserr, Riveted, Includes: Ref. 32, 34, 35, 36, 37 (9622744), 38 (9622715), 39, 40 & 41;ASN 644502Img
Alts
Ref.
Qté
1Disponibilité
N° de pièce
9623571Description
COUTEAU; Overserr, Bolted, Includes: Ref. 32, 34, 35, 36, 37 (9622744), 38 (9622715), 39, 40 & 41;ASN 644502Img
Alts
Ref.
34Qté
1Disponibilité
N° de pièce
87936Description
VIS Hex, 3/8'' - 16 x 2-1/2'', Gr 5;Img
Alts
Ref.
Qté
2Disponibilité
N° de pièce
285072Description
RONDELLE 10.3mm ID x 22.2mm OD x 2.7mm Thk, HTS, ZND; (3/8'')Img
Alts
Ref.
Qté
1Disponibilité
N° de pièce
88902Description
CONTRE-ECROU PREVAILING TORQUE, 3/8'' - 16, Gr C, Directional;Img
Alts
Ref.
35Qté
1Disponibilité
N° de pièce
254132Description
BAGUE 12.7mm ID x 46.15mm OD x 58.98mm L; Rubber, Knife HeadImg
Alts
Ref.
Qté
1Disponibilité
N° de pièce
NSSDescription
PAS VENDU SÉPARÉMENT; Knifeback;ASN 644502Img
Alts
Ref.
37Qté
29Disponibilité
N° de pièce
26622Description
SECTION DE COUTEAU; Smooth;BSN 644501Img
Alts
Ref.
Qté
28Disponibilité
N° de pièce
26622Description
SECTION DE COUTEAU; Smooth;ASN 644502Img
Alts
Ref.
Qté
29Disponibilité
N° de pièce
86616945Description
SECTION DE COUTEAU; Underserr, Black;BSN 644501Img
Alts
Ref.
Qté
28Disponibilité
N° de pièce
86616945Description
SECTION DE COUTEAU; Underserr, Black;ASN 644502Img
Alts
Ref.
Qté
29Disponibilité
N° de pièce
706226Description
SECTION DE COUTEAU; Underserr, Chrome;BSN 644501Img
Alts
Ref.
Qté
28Disponibilité
N° de pièce
706226Description
SECTION DE COUTEAU; Underserr, Chrome;ASN 644502Img
Alts
Ref.
Qté
24Disponibilité
N° de pièce
86615988Description
SECTION DE COUTEAU 14 SPI, OVERSERRATED CUTITNG EDGE, OIL PROTECTIVE FINISH, STRAIGHT THRU MOUNTING HOLES; OverserratedImg
Alts
Ref.
38Qté
1Disponibilité
N° de pièce
187216Description
SECTION DE COUTEAU; half, Knife;BSN 644501Img
Alts
Ref.
Qté
1Disponibilité
N° de pièce
630555Description
SECTION DE COUTEAU; End, Underserrated, Full Section + Half Section;ASN 644502Img
Alts
Ref.
Qté
1Disponibilité
N° de pièce
86617760Description
SECTION DE COUTEAU; End, RH, OverserrImg
Alts
Ref.
39Qté
50Disponibilité
N° de pièce
46436Description
RIVET Button, 5.33mm OD x 15.75mm L; Button Hd, #5-1/2, 7/32''x 5/8'';Rivets are available in Rivet Assortment 70622, which includes: (75) 46436, (12) 65744, (6) 120436, & (7) 13736 CSK Rivets #5, 1/2'' 9/16''.Img
Alts
Ref.
Qté
ARDisponibilité
N° de pièce
86507777Description
KIT; Bolts & Nuts, 5/8'', Knife, Includes: (50) Nuts & (50) BoltsImg
Alts
Ref.
40Qté
4Disponibilité
N° de pièce
65474Description
RIVET Button, 8.28mm OD x 23.8mm L; Button Hd, #5-1/2 , 7/32''x 15/16'';Rivets are available in Rivet Assortment 70622, which includes: (75) 46436, (12) 65744, (6) 120436, & (7) 13736 CSK Rivets #5, 1/2'' 9/16''.Img
Alts
Ref.
Qté
ARDisponibilité
N° de pièce
86507778Description
KIT; Bolts & Nuts, 7/8'', Knife, Includes: (25) Nuts & (25) BoltsImg
Alts
Ref.
41Qté
5Disponibilité
N° de pièce
130436Description
RIVET Button, 8.28mm OD x 30.2mm L; Button Hd, #5-1/2, 7/32''x 1-3/16'';Rivets are available in Rivet Assortment 70622, which includes: (75) 46436, (12) 65744, (6) 120436, & (7) 13736 CSK Rivets #5, 1/2'' 9/16''.Img
Alts
Ref.
42Qté
1Disponibilité
N° de pièce
144532Description
COLLIER; Knife End, Riveted Knife;Refs. 45 - 53 may be used as optional items in lieu of Refs. 42 - 44.Img
Alts
Ref.
Qté
-Disponibilité
N° de pièce
850137Description
PINCE LAME; End, Bolted Knife;Refs. 45 - 53 may be used as optional items in lieu of Refs. 42 - 44.Img
Alts
Ref.
43Qté
5Disponibilité
N° de pièce
67357Description
PINCE LAME; Low, Riveted Knife;Refs. 45 - 53 may be used as optional items in lieu of Refs. 42 - 44.Img
Alts
Ref.
Qté
5Disponibilité
N° de pièce
861700Description
PINCE LAME; High, Bollted Knife;Refs. 45 - 53 may be used as optional items in lieu of Refs. 42 - 44.Img
Alts
Ref.
Qté
5Disponibilité
N° de pièce
137651Description
PINCE LAME; High, Bolted Knife, Requires 139188 Shim;Refs. 45 - 53 may be used as optional items in lieu of Refs. 42 - 44.Img
Alts
Ref.
Qté
5Disponibilité
N° de pièce
139188Description
CALE .090'' Thk; Refs. 45 - 53 may be used as optional items in lieu of Refs. 42 - 44.Img
Alts
Ref.
44Qté
14Disponibilité
N° de pièce
86615982Description
GUARD; Double, Std., Gray;Refs. 45 - 53 may be used as optional items in lieu of Refs. 42 - 44.Img
Alts
Ref.
44Qté
14Disponibilité
N° de pièce
87042356Description
GUARD; Double, Std., Yellow;Refs. 45 - 53 may be used as optional items in lieu of Refs. 42 - 44.Img
Alts
Ref.
Qté
1Disponibilité
N° de pièce
9627887Description
VIS Hex, 7/16'' - 14 x 1 1/4'', Gr 5, Full Thd;Img
Alts
Ref.
Qté
1Disponibilité
N° de pièce
88807Description
VIS A TETE BOMBEE Sq Nk, 7/16'' - 14 x 1 3/4'', Gr 5;Img
Alts
Ref.
Qté
16Disponibilité
N° de pièce
88586Description
VIS A TETE BOMBEE Sq Nk, 7/16'' - 14 x 1 1/2'', Gr 5;Img
Alts
Ref.
Qté
10Disponibilité
N° de pièce
86508777Description
VIS A TETE BOMBEE Sq Nk, 7/16'' - 14 x 1 1/4'', Gr 5, Full Thd;Img
Alts
Ref.
45Qté
1Disponibilité
N° de pièce
86617059Description
GUARD; Stub, Special, RH;Applicable to Machines W/Stub Guards; (SN Break) From 1Img
Alts
Ref.
Qté
1Disponibilité
N° de pièce
280804Description
VIS A TETE BOMBEE Sq Nk, 7/16'' - 14 x 2'', Gr 5;Img
Alts
Ref.
Qté
1Disponibilité
N° de pièce
80700Description
RONDELLE 0.56'' ID x 1.38'' OD x 0.11'' Thk;Img
Alts
Ref.
Qté
2Disponibilité
N° de pièce
9627887Description
VIS Hex, 7/16'' - 14 x 1 1/4'', Gr 5, Full Thd; Use W/PN 86521589, End GuardImg
Alts
Ref.
Qté
2Disponibilité
N° de pièce
86508778Description
VIS A TETE BOMBEE Sq Nk, 7/16'' - 14 x 1 3/4'', Gr 5;Img
Alts
Ref.
47Qté
13Disponibilité
N° de pièce
86617061Description
GUARD; Stub, Double;Applicable to Machines W/Stub GuardsImg
Alts
Ref.
Qté
2Disponibilité
N° de pièce
280804Description
VIS A TETE BOMBEE Sq Nk, 7/16'' - 14 x 2'', Gr 5;Img
Alts
Ref.
Qté
24Disponibilité
N° de pièce
88586Description
VIS A TETE BOMBEE Sq Nk, 7/16'' - 14 x 1 1/2'', Gr 5;Img
Alts
Ref.
48Qté
1Disponibilité
N° de pièce
86617060Description
GUARD; Stub, Special, LH;Applicable to Machines W/Stub GuardsImg
Alts
Ref.
Qté
1Disponibilité
N° de pièce
280804Description
VIS A TETE BOMBEE Sq Nk, 7/16'' - 14 x 2'', Gr 5;Img
Alts
Ref.
Qté
1Disponibilité
N° de pièce
9627887Description
VIS Hex, 7/16'' - 14 x 1 1/4'', Gr 5, Full Thd;Img
Alts
Ref.
49Qté
1Disponibilité
N° de pièce
577311Description
COLLIER; Hold-down, Stub Guards, R.H. End;Applicable to Machines W/Stub Guards;Used with Riveted KnifeImg
Alts
Ref.
Qté
1Disponibilité
N° de pièce
850136Description
PINCE LAME; Hold-down, Stub Guards, R.H. End;Applicable to Machines W/Stub Guards;Used with Bolted KnifeImg
Alts
Ref.
50Qté
3Disponibilité
N° de pièce
288074Description
PINCE LAME; Holddown, High;Applicable to Machines W/Stub Guards;Used with Riveted KnifeImg
Alts
Ref.
Qté
3Disponibilité
N° de pièce
850135Description
PINCE LAME; Hold-down, Stub Guards, High;Applicable to Machines W/Stub Guards;Used with Bolted KnifeImg
Alts
Ref.
51Qté
11Disponibilité
N° de pièce
287458Description
COLLIER; Hold-down, High, Used w/(3) Ref. 49;Applicable to Machines W/Stub Guards;Used with Riveted KnifeImg
Alts
Ref.
51Qté
11Disponibilité
N° de pièce
288074Description
PINCE LAME; Holddown, High;Applicable to Machines W/Stub Guards;Used with Bolted KnifeImg
Alts
Ref.
52Qté
14Disponibilité
N° de pièce
86622663Description
CALE 26.99mm OD x 0.25mm Thk; 1-1/4'' x 4-1/4'' x .010'';Applicable to Machines W/Stub GuardsImg
Alts
Ref.
53Qté
28Disponibilité
N° de pièce
86622662Description
CALE; 1'' x 4'' x .036'';Applicable to Machines W/Stub GuardsImg
Alts
Ref.
54Qté
ARDisponibilité
N° de pièce
86562960Description
KIT; Kit, Knife Head;Kit consists of (25) 848083 Lock Nuts, (11) 84805 1'' Knife Bolts, (9) 851735 7/8'' Knife Bolts & (5) 1-1/8'' 851736 Knife Bolts.Img
Alts
Ref.
55Qté
1Disponibilité
N° de pièce
86518945Description
KIT; Adjustable Hold Down, Includes Ref 56 - 62, Standard on machines ASNImg
Alts
Ref.
58Qté
1Disponibilité
N° de pièce
86517871Description
BOULON DE CHARRUE 3/8'' - 16 x 1 1/8'' , Gr 5;Img
Alts
Ref.
59Qté
1Disponibilité
N° de pièce
86521609Description
ECROU A EMBASE Flg, 3/8'' - 16;Img
Alts
Ref.
60Qté
1Disponibilité
N° de pièce
86622663Description
CALE 26.99mm OD x 0.25mm Thk; 0.010''Img
Alts
Ref.
63Qté
ARDisponibilité
N° de pièce
86592481Description
KIT; Underserrated, RH, End, Includes: Ref. 38 (2), Bolts (6) & Nuts (6)Img
Alts
Ref.
64Qté
ARDisponibilité
N° de pièce
86592482Description
KIT; Overserrated, RH, End, Includes: Ref. 38 (2), Bolts (6) & Nuts (6)Img
Alts
