TABLE OF CONTENTS
DIAGRAM
PART LIST
Clear callout
Select All
Ref.
Qty
Part #
Alts
Description
Image
-
11SEAL; SEAL, pitman brg front oil, 4 for wire balers
-
2SLOTTED NUT 7/16''-14, G5; 7/16-14 C-Z slt hex.
-
2PIN; 3/32 x 1-1/2 znp cot.
-
21LUBE NIPPLE 1/8''-27 x .66 lg; NIPPLE, LUBE, , PTF 1/8''-27 x .66 lg
-
31BEARING ASSY; ASSY, pitman front, for wire balers
-
41BEARING LINER; INSERT, pitman brg front, 2 for wire baler
-
51BEARING ASSY 4.5'' OD x 2.97''; BEARING ASSY, pitman front, 435 & 445 twine balers
-
3BOLT Hex, 1/2'' - 13 x 3'', Gr 5; SCREW, 1/2-13 x 3 hex-hd cap
-
3LOCK NUT 1/2''-13, GB; NUT, 1/2-13 C-Z hex lock
-
2LOCK WASHER 1/2''; WASHER, LOCK, 1/2'';the 3rd bolt and nut attach #2 to #4 - see hole on top of #4
-
616SHIM; pitman brg, (or as required) 435 & 445 twine baler
-
71PITMAN; ASSY, 435 & 445 twine balers
-
82BUSHING 31.8mm ID x 34.95mm OD x 44.7mm L; BUSHING, pitman rear, order ref no. 7 for twine balers, order ref no. 10 for wire baler
-
91LUBE NIPPLE 65 Degree, 1/8'' NPT x 1.20'' lg; FITTING, 1/8-27 PTF 65 deg angle lub
-
101TUBE 35.75'' Length; PITMAN ASSY, 445 wire baler
-
111SUPPORT; BLOCK ASSY, plunger pitman
-
121BLOCK; pitman
-
4CARRIAGE BOLT Sht Sq Nk, 1/2'' - 13 x 1 1/2'', Gr 5; BOLT, 1/2 x 1-1/2 pln crg type 5
-
4LOCK NUT 1/2''-13, GB; NUT, 1/2-13 hex lock
-
4LOCK WASHER 1/2''; WASHER, LOCK, 1/2''
-
131STRIP; SCRAPER, plunger front
-
1SNAP RING Hex, 5/8'' - 11 x 2'', Gr 5; SCREW, 5/8-11 x 2 C-Z hex-hd cap
-
1LOCK WASHER 5/8''; WASHER, LOCK, 5/8''
-
1WASHER; 21/32 x 1-1/4 x 16 ga C-Z
-
2WASHER; 21/32 x 1-1/4 x 7 ga C-Z
-
146SPH ROLLER BEARING Ball, 0.628 ID x 2 OD x 15 mm; plunger roller
-
1NO LONGER SERVICED; SCREW, 5-11 x 1-1/2 C-Z hex-hd cap
-
1LOCK WASHER 5/8''; WASHER, LOCK, 5/8''
-
1WASHER; 21/32 x 1-1/4 x 7 ga C-Z
-
151ROLLER; MOUNT ASSY, roller LH
-
162PAD; wearing lower
-
4BOLT Hex, 5/16'' - 18 x 5/8'', Gr 5; SCREW, 5/16-18 x 5/8 C-Z hex-hd cap
-
4LOCK WASHER 5/16'' ID x 19/32'' OD x 1/8'' Thk; WASHER, LOCK, 5/16''
-
184SHIM; plunger lower (or as required)
-
193SHIM 45.72mm OD x 0.76mm Thk; plunger upper right (or as required)
-
201BLOCK; plunger upper right
-
2BOLT Hex, 5/16'' - 18 x 1'', Gr 2; 5/16 x 1 C-Z hex-hd mach
-
2NUT; 5/16-18 C-Z tee type G
-
2LOCK WASHER 5/16'' ID x 19/32'' OD x 1/8'' Thk; WASHER, LOCK, 5/16''
-
211PLUNGER; ASSY
-
221KNIFE; hay
-
3CARRIAGE BOLT #3, 5/8'' - 11 x 1 1/2'', Gr 2; BOLT, 5/8 x 1-1/2 C-Z no. 3 plow repair hd
-
3NUT Hex, 5/8'' - 11, Gr 5; 5/8-11 C-Z hex
-
3LOCK WASHER 5/8''; WASHER, LOCK, 5/8''
-
231BLOCK; plunger upper center
-
2CARRIAGE BOLT Sq Nk, 3/8'' - 16 x 1 3/4'', Gr 2; BOLT, 3/8 x 1-3/4 C-Z sq-nk crg
-
2NUT 3/8'' - 16, Gr 5;
-
2LOCK WASHER Helical Spring, 3/8''; WASHER, LOCK, 3/8''
-
241BOLT Eye, 5/8'' - 11 x 4.69''; plunger eye
-
2NUT Hex, 1/2'' - 13, Gr 5; NUT, 1/2''-13, G5
-
251SCRAPER; plunger rear
-
1BOLT Short NK, 5/16''-18 x 1'', G2, Full Thd; CARRIAGE, Short NK, 5/16''-18 x 1'', G2, Full Thd
-
1NUT 5/16''-18, G5;
-
1LOCK WASHER 5/16'' ID x 19/32'' OD x 1/8'' Thk; WASHER, LOCK, 5/16''
-
1BEARING WASHER 5/16'', SAE; WASHER, 11/32 x 11/16 x 16 ga C-Z
-
262STUD; roller mount LH
-
272ANGLE; plunger guide
-
1BOLT Hex, 3/8'' - 16 x 5/8'', Gr 5; SCREW, 3/8-16 x 5/8 C-Z hex-hd cap, 11 for twine balers, 9 for wire baler
-
1LOCK WASHER Helical Spring, 3/8''; WASHER, LOCK, , 12 for twine balers, 10 for wire balers 3/8''
-
1BOLT Hex, 3/8'' - 16 x 3/4'', Gr 5, Full Thd; 3/8-16 x 3/4 C-Z hex-hd cap, 2 for wire baler
-
1LOCK WASHER Int Tooth, 3/8''; WASHER, LOCK, , 2 for wire baler Int Tooth, 3/8''
-
6WASHER; 13/32 x 1 x 22 ga C-Z
-
1BOLT Hex, 3/8'' - 16 x 1'', Gr 5; 3/8-16 x 1 znd hex-hd cap
-
292BOLT Eye, 1/2'' - 13 x 2.70''; plunger guide eye
-
2JAM NUT Jam, 1/2''-13, G5; 1/2-13 znp hex. jam
-
2NUT Hex, 1/2'' - 13, Gr 5; NUT, 1/2''-13, G5
-
1WASHER; 13/32 x 7/8 x 11 ga C-Z (or as required)
-
301STOP; ARM ASSY, plunger stop, replaces 674066R1 and 674069R1
-
1WASHER; 17/32 x 7/8 x 16 ga C-Z
-
1COTTER PIN 3/16'' x 1''; PIN, SPLIT (COTTER), 3/16'' x 1''
-
311BRACKET; plunger stop mounting
-
2CARRIAGE BOLT Short Nk, 3/8'' - 16 x 3/4'', Gr 2, Full Thd; BOLT, 3/8 x 3/4 C-Z sq-nk crg
-
2NUT 3/8'' - 16, Gr 5;
-
2LOCK WASHER Helical Spring, 3/8''; WASHER, LOCK, 3/8''
-
321CLEVIS; plunger stop link
-
331LINKAGE; LINK, plunger stop
-
1NUT Hex, 1/2'' - 13, Gr 5; NUT, 1/2''-13, G5
-
2COTTER PIN 1/8'' x 1''; PIN, SPLIT (COTTER), 1/8'' x 1''
-
2WASHER; 17/32 x 1-1/2 x 16 ga C-Z
-
341BUSHING; plunger roller mount
-
1SNAP RING Hex, 5/8'' - 11 x 2'', Gr 5; SCREW, 5/8-11 x 2 C-Z hex-hd cap
-
1LOCK WASHER Ext-Int Tooth, 5/8''; WASHER, 5/8 C-Z int-ext tooth lock
-
1WASHER; 21/32 x 1-3/8 x 11 ga C-Z
-
352BEARING ASSY; BEARING ASSY, plunger roller
-
361SPRING; plunger stop
-
371ANCHOR; plunger stop spring
-
381COMPRESSION SPRING; plunger stop relief
-
391LUBE NIPPLE Angled Con. Head, 90?, M10 x 1 x 18mm L, Self Tapping; FITTING, 1/8-27 PTF 90 deg angle lub
-
401PIVOT; ASSY, plunger stop
-
1BOLT Hex, 3/8'' - 16 x 1 1/4'', Gr 2; 3/8 x 1-1/4 C-Z hex-hd mach
-
1NUT 3/8'' - 16, Gr 5;
-
1LOCK WASHER Helical Spring, 3/8''; WASHER, LOCK, 3/8''
-
411STOP; plunger
-
421ANGLE; plunger guide thrust, replaces 674055R1
-
4PLOW BOLT #3, 3/8'' - 16 x 1 1/4'', Gr 2; BOLT, 3/8-16 x 1-1/4 znd no. 3 plow
-
2CARRIAGE BOLT #3, 3/8'' - 16 x 2'', Gr 2; BOLT, 3/8-16 x 2 znd no. 3 plow
-
6NUT 3/8'' - 16, Gr 5;
-
6LOCK WASHER Helical Spring, 3/8''; WASHER, LOCK, 3/8''
-
4WASHER; 13/32 x 7/8 x 11 ga C-Z
-
431PLATE; EXTENSION, bottom plate
-
441SLEEVE; ASSY, plunger stop spring
-
1WASHER; 1-1/32 x 1-1/2 x 11 ga C-Z
-
1LOCK PIN 1/4'' x 1 1/4'', Slotted; Pin, 1/4'' x 1 1/4'', Slotted
-
1WASHER; 25/32 x 1-1/4 x 11 ga C-Z
-
1SPLIT PIN/SAFETY PIN; PIN, 3/8 x 2-1/4 znp std-hd
-
1KNIFE; 1/8'' x 3/4''
-
1WASHER; 13/32 x 1 x 16 ga C-Z
-
451PLATE; STRIP, plunger thrust
-
6BOLT Hex, 5/16'' - 18 x 3/4'', Gr 5; SCREW, 5/16-18 x 3/4 znd hex-hd cap
-
2BOLT Hex, 5/16'' - 18 1'', Full Thd, Gr 5; 5/16-18 x 1 znd hex-hd cap
-
1BOLT Hex, 5/16'' - 18 x 1 1/8'', Gr 5, Full Thd; SCREW, 5/16-18 x 1-1/8 znd hex-hd cap
-
9LOCK WASHER 5/16'' ID x 19/32'' OD x 1/8'' Thk; WASHER, LOCK, 5/16''
-
9WASHER; 11/32 x 3/4 x 7 ga C-Z
-
461NIPPLE, LUBE; NIPPLE, plunger stop
Select All
Ref.
1Qty
1Availability
Part #
665728R1Description
SEAL; SEAL, pitman brg front oil, 4 for wire balersImg
Alts
Ref.
Qty
2Availability
Part #
425-127Description
SLOTTED NUT 7/16''-14, G5; 7/16-14 C-Z slt hex.Img
Alts
Ref.
2Qty
1Availability
Part #
109461Description
LUBE NIPPLE 1/8''-27 x .66 lg; NIPPLE, LUBE, , PTF 1/8''-27 x .66 lgImg
Alts
Ref.
3Qty
1Availability
Part #
665716R11Description
BEARING ASSY; ASSY, pitman front, for wire balersImg
Alts
Ref.
4Qty
1Availability
Part #
664975R1Description
BEARING LINER; INSERT, pitman brg front, 2 for wire balerImg
Alts
Ref.
5Qty
1Availability
Part #
495177R21Description
BEARING ASSY 4.5'' OD x 2.97''; BEARING ASSY, pitman front, 435 & 445 twine balersImg
Alts
Ref.
Qty
3Availability
Part #
179893Description
BOLT Hex, 1/2'' - 13 x 3'', Gr 5; SCREW, 1/2-13 x 3 hex-hd capImg
Alts
Ref.
Qty
3Availability
Part #
664573R1Description
LOCK NUT 1/2''-13, GB; NUT, 1/2-13 C-Z hex lockImg
Alts
Ref.
Qty
2Availability
Part #
103323Description
LOCK WASHER 1/2''; WASHER, LOCK, 1/2'';the 3rd bolt and nut attach #2 to #4 - see hole on top of #4Img
Alts
Ref.
6Qty
16Availability
Part #
495278R2Description
SHIM; pitman brg, (or as required) 435 & 445 twine balerImg
Alts
Ref.
7Qty
1Availability
Part #
667943R91Description
PITMAN; ASSY, 435 & 445 twine balersImg
Alts
Ref.
8Qty
2Availability
Part #
664976R1Description
BUSHING 31.8mm ID x 34.95mm OD x 44.7mm L; BUSHING, pitman rear, order ref no. 7 for twine balers, order ref no. 10 for wire balerImg
Alts
Ref.
9Qty
1Availability
Part #
127743Description
LUBE NIPPLE 65 Degree, 1/8'' NPT x 1.20'' lg; FITTING, 1/8-27 PTF 65 deg angle lubImg
Alts
Ref.
10Qty
1Availability
Part #
665714R91Description
TUBE 35.75'' Length; PITMAN ASSY, 445 wire balerImg
Alts
Ref.
11Qty
1Availability
Part #
668358R91Description
SUPPORT; BLOCK ASSY, plunger pitmanImg
Alts
Ref.
Qty
4Availability
Part #
673707R1Description
CARRIAGE BOLT Sht Sq Nk, 1/2'' - 13 x 1 1/2'', Gr 5; BOLT, 1/2 x 1-1/2 pln crg type 5Img
Alts
Ref.
Qty
4Availability
Part #
664573R1Description
LOCK NUT 1/2''-13, GB; NUT, 1/2-13 hex lockImg
Alts
Ref.
Qty
1Availability
Part #
271723Description
SNAP RING Hex, 5/8'' - 11 x 2'', Gr 5; SCREW, 5/8-11 x 2 C-Z hex-hd capImg
Alts
Ref.
Qty
1Availability
Part #
492-11062Description
LOCK WASHER 5/8''; WASHER, LOCK, 5/8''Img
Alts
Ref.
14Qty
6Availability
Part #
667925R91Description
SPH ROLLER BEARING Ball, 0.628 ID x 2 OD x 15 mm; plunger rollerImg
Alts
Ref.
Qty
1Availability
Part #
NLSDescription
NO LONGER SERVICED; SCREW, 5-11 x 1-1/2 C-Z hex-hd capImg
Alts
Ref.
Qty
1Availability
Part #
492-11062Description
LOCK WASHER 5/8''; WASHER, LOCK, 5/8''Img
Alts
Ref.
Qty
4Availability
Part #
180075Description
BOLT Hex, 5/16'' - 18 x 5/8'', Gr 5; SCREW, 5/16-18 x 5/8 C-Z hex-hd capImg
Alts
Ref.
Qty
4Availability
Part #
80681Description
LOCK WASHER 5/16'' ID x 19/32'' OD x 1/8'' Thk; WASHER, LOCK, 5/16''Img
Alts
Ref.
18Qty
4Availability
Part #
668368R1Description
SHIM; plunger lower (or as required)Img
Alts
Ref.
19Qty
3Availability
Part #
668365R1Description
SHIM 45.72mm OD x 0.76mm Thk; plunger upper right (or as required)Img
Alts
Ref.
Qty
2Availability
Part #
18474R1Description
BOLT Hex, 5/16'' - 18 x 1'', Gr 2; 5/16 x 1 C-Z hex-hd machImg
Alts
Ref.
Qty
2Availability
Part #
80681Description
LOCK WASHER 5/16'' ID x 19/32'' OD x 1/8'' Thk; WASHER, LOCK, 5/16''Img
Alts
Ref.
Qty
3Availability
Part #
21538R1Description
CARRIAGE BOLT #3, 5/8'' - 11 x 1 1/2'', Gr 2; BOLT, 5/8 x 1-1/2 C-Z no. 3 plow repair hdImg
Alts
Ref.
Qty
3Availability
Part #
280374Description
NUT Hex, 5/8'' - 11, Gr 5; 5/8-11 C-Z hexImg
Alts
Ref.
Qty
3Availability
Part #
492-11062Description
LOCK WASHER 5/8''; WASHER, LOCK, 5/8''Img
Alts
Ref.
Qty
2Availability
Part #
18422R1Description
CARRIAGE BOLT Sq Nk, 3/8'' - 16 x 1 3/4'', Gr 2; BOLT, 3/8 x 1-3/4 C-Z sq-nk crgImg
Alts
Ref.
Qty
2Availability
Part #
120382Description
LOCK WASHER Helical Spring, 3/8''; WASHER, LOCK, 3/8''Img
Alts
Ref.
24Qty
1Availability
Part #
667922R1Description
BOLT Eye, 5/8'' - 11 x 4.69''; plunger eyeImg
Alts
Ref.
Qty
2Availability
Part #
120378Description
NUT Hex, 1/2'' - 13, Gr 5; NUT, 1/2''-13, G5Img
Alts
Ref.
Qty
1Availability
Part #
12872R1Description
BOLT Short NK, 5/16''-18 x 1'', G2, Full Thd; CARRIAGE, Short NK, 5/16''-18 x 1'', G2, Full ThdImg
Alts
Ref.
Qty
1Availability
Part #
80681Description
LOCK WASHER 5/16'' ID x 19/32'' OD x 1/8'' Thk; WASHER, LOCK, 5/16''Img
Alts
Ref.
Qty
1Availability
Part #
120393Description
BEARING WASHER 5/16'', SAE; WASHER, 11/32 x 11/16 x 16 ga C-ZImg
Alts
Ref.
Qty
1Availability
Part #
180118Description
BOLT Hex, 3/8'' - 16 x 5/8'', Gr 5; SCREW, 3/8-16 x 5/8 C-Z hex-hd cap, 11 for twine balers, 9 for wire balerImg
Alts
Ref.
Qty
1Availability
Part #
120382Description
LOCK WASHER Helical Spring, 3/8''; WASHER, LOCK, , 12 for twine balers, 10 for wire balers 3/8''Img
Alts
Ref.
Qty
1Availability
Part #
113-206Description
BOLT Hex, 3/8'' - 16 x 3/4'', Gr 5, Full Thd; 3/8-16 x 3/4 C-Z hex-hd cap, 2 for wire balerImg
Alts
Ref.
Qty
1Availability
Part #
138542Description
LOCK WASHER Int Tooth, 3/8''; WASHER, LOCK, , 2 for wire baler Int Tooth, 3/8''Img
Alts
Ref.
Qty
1Availability
Part #
180122Description
BOLT Hex, 3/8'' - 16 x 1'', Gr 5; 3/8-16 x 1 znd hex-hd capImg
Alts
Ref.
29Qty
2Availability
Part #
674056R1Description
BOLT Eye, 1/2'' - 13 x 2.70''; plunger guide eyeImg
Alts
Ref.
Qty
2Availability
Part #
120238Description
JAM NUT Jam, 1/2''-13, G5; 1/2-13 znp hex. jamImg
Alts
Ref.
Qty
2Availability
Part #
120378Description
NUT Hex, 1/2'' - 13, Gr 5; NUT, 1/2''-13, G5Img
Alts
Ref.
Qty
1Availability
Part #
21741R1Description
WASHER; 13/32 x 7/8 x 11 ga C-Z (or as required)Img
Alts
Ref.
30Qty
1Availability
Part #
201581C1Description
STOP; ARM ASSY, plunger stop, replaces 674066R1 and 674069R1Img
Alts
Ref.
Qty
1Availability
Part #
18481R1Description
COTTER PIN 3/16'' x 1''; PIN, SPLIT (COTTER), 3/16'' x 1''Img
Alts
Ref.
Qty
2Availability
Part #
18508R1Description
CARRIAGE BOLT Short Nk, 3/8'' - 16 x 3/4'', Gr 2, Full Thd; BOLT, 3/8 x 3/4 C-Z sq-nk crgImg
Alts
Ref.
Qty
2Availability
Part #
120382Description
LOCK WASHER Helical Spring, 3/8''; WASHER, LOCK, 3/8''Img
Alts
Ref.
Qty
1Availability
Part #
120378Description
NUT Hex, 1/2'' - 13, Gr 5; NUT, 1/2''-13, G5Img
Alts
Ref.
Qty
2Availability
Part #
137185Description
COTTER PIN 1/8'' x 1''; PIN, SPLIT (COTTER), 1/8'' x 1''Img
Alts
Ref.
Qty
1Availability
Part #
271723Description
SNAP RING Hex, 5/8'' - 11 x 2'', Gr 5; SCREW, 5/8-11 x 2 C-Z hex-hd capImg
Alts
Ref.
Qty
1Availability
Part #
178627Description
LOCK WASHER Ext-Int Tooth, 5/8''; WASHER, 5/8 C-Z int-ext tooth lockImg
Alts
Ref.
35Qty
2Availability
Part #
674058R21Description
BEARING ASSY; BEARING ASSY, plunger rollerImg
Alts
Ref.
38Qty
1Availability
Part #
664301R1Description
COMPRESSION SPRING; plunger stop reliefImg
Alts
Ref.
39Qty
1Availability
Part #
332040Description
LUBE NIPPLE Angled Con. Head, 90?, M10 x 1 x 18mm L, Self Tapping; FITTING, 1/8-27 PTF 90 deg angle lubImg
Alts
Ref.
Qty
1Availability
Part #
18495R1Description
BOLT Hex, 3/8'' - 16 x 1 1/4'', Gr 2; 3/8 x 1-1/4 C-Z hex-hd machImg
Alts
Ref.
Qty
1Availability
Part #
120382Description
LOCK WASHER Helical Spring, 3/8''; WASHER, LOCK, 3/8''Img
Alts
Ref.
42Qty
1Availability
Part #
203032C1Description
ANGLE; plunger guide thrust, replaces 674055R1Img
Alts
Ref.
Qty
4Availability
Part #
19020R1Description
PLOW BOLT #3, 3/8'' - 16 x 1 1/4'', Gr 2; BOLT, 3/8-16 x 1-1/4 znd no. 3 plowImg
Alts
Ref.
Qty
2Availability
Part #
19023R1Description
CARRIAGE BOLT #3, 3/8'' - 16 x 2'', Gr 2; BOLT, 3/8-16 x 2 znd no. 3 plowImg
Alts
Ref.
Qty
6Availability
Part #
120382Description
LOCK WASHER Helical Spring, 3/8''; WASHER, LOCK, 3/8''Img
Alts
Ref.
Qty
1Availability
Part #
21648R1Description
LOCK PIN 1/4'' x 1 1/4'', Slotted; Pin, 1/4'' x 1 1/4'', SlottedImg
Alts
Ref.
Qty
1Availability
Part #
22752R1Description
SPLIT PIN/SAFETY PIN; PIN, 3/8 x 2-1/4 znp std-hdImg
Alts
Ref.
Qty
6Availability
Part #
180077Description
BOLT Hex, 5/16'' - 18 x 3/4'', Gr 5; SCREW, 5/16-18 x 3/4 znd hex-hd capImg
Alts
Ref.
Qty
2Availability
Part #
9635884Description
BOLT Hex, 5/16'' - 18 1'', Full Thd, Gr 5; 5/16-18 x 1 znd hex-hd capImg
Alts
Ref.
Qty
1Availability
Part #
180080Description
BOLT Hex, 5/16'' - 18 x 1 1/8'', Gr 5, Full Thd; SCREW, 5/16-18 x 1-1/8 znd hex-hd capImg
Alts
Ref.
Qty
9Availability
Part #
80681Description
LOCK WASHER 5/16'' ID x 19/32'' OD x 1/8'' Thk; WASHER, LOCK, 5/16''Img
Alts