-
12WELLE; - axle, front drive (48'' gauge tractor) 13-3/16'' long (Original equipment) Has 6 splines on coupling end (See D12151)
-
12WELLE; - axle, final drive (48'' gauge tractor) 13-1/4'' long (Replacement) Has 10'' splines on coupling end (See 11845)@@Part of Kit P/N D12151
-
12KUPPLUNG; - final drive (42'' gauge and wider tractors) Original equipment (Has 6 splines) See D12151
-
22X; COUPLING - final drive (48'' gauge tractors only) Replacement (Has 10 splines) See 11831 (Use D32730)@@Part of Kit P/N D12151
-
2X; SNAP RING - D31516 coupling only (Not shown)@@Part of Kit P/N D12151
-
22KUPPLUNG; - final drive (48'' gauge tractors only) Replacement (Has 10 splines) See 11831, D31516, and O8897AB@@Part of Kit P/N D12151
-
1SPRENGRING; SNAP RING - axle shaft retaining (Not shown)
-
22KUPPLUNG; - final drive (36'' gauge tractor)
-
31NIET; HOUING - final drive, L.H. inner (Original equipment) When stock is exhausted, use 1- D29737, 1 - 14-1240, 2 - D29721, and 3 - 131-395
-
31NIET; HOUSING - final drive, R.H. inner (Original equipment) When stock is exhausted, use 1 - D29736, 1 - 14-1240, 2 - D29721, and 3 - 131-395
-
42X; HOUSING - final drive, outer (Use D24658)@@Before ordering outer housings, check the casting number. When replacing 11823 housing with D24658 housing, it will also be necessary to order Ref. 5 - 11 listed under D24658.
-
610SCHRAUBE Hex, 7/16'' - 20 x 2-1/2''; HHCS - 7/16'' - 20 NF x 2-1/2''
-
734SICHERUNGSSCHEIBE 7/16'';
-
834MUTTER 7/16''-20, G5; - hex. (7/16'' - 20 NF)
-
42GEHÄUSE; - final drive, outer@@Before ordering outer housings, check the casting number. When replacing 11823 housing with D24658 housing, it will also be necessary to order Ref. 5 - 11 listed under D24658.
-
518SCHRAUBE Hex, 7/16'' - 14 x 1-1/2'', Gr 5; Hex, 7/16''-14 x 1 1/2, G5
-
610SCHRAUBE Hex, 7/16'' - 14 x 2-1/4'', Gr 5;
-
728SICHERUNGSSCHEIBE 7/16'';
-
828MUTTER 7/16''-14, G5; - hex. (7/16'' - 14 NC)
-
96SCHRAUBE; BOLT - body fit (1/2'' - 13 NC x 2-1/8'')
-
106SICHERUNGSSCHEIBE 1/2'';
-
116MUTTER 1/2''-13, G5; - hex. (1/2'' - 13 NC)
-
124KUGELLAGER; - ball, final drive pinion
-
132WELLE; PINION - final drive (Original equipment) Has 6 splines on coupling end (See D12151)
-
132WELLE; PINION - final drive (48'' gauge tractor only) Replacement (Has 10 splines on coupling end) See 11832@@Part of Kit P/N D12151
-
142LAGER; - ball, final driveshaft (Inner)
-
152GEAR WHEEL; GEAR - final drive
-
162WELLE; - final drive
-
172LAGER; BEARING - ball, final driveshaft (Outer)
-
182NO LONGER SERVICED; SEAL - oil, final driveshaft (When stock is exhausted, use D29517)
-
182DICHTUNG; - oil, final driveshaft (See 40610)
-
192DISTANZSTÜCK; - final driveshaft
-
202DICHTUNG; - seal retainer
-
212HALTERUNG; - seal, driveshaft
-
2212SCHRAUBE Hex, 3/8'' - 16 x 1-1/4'', Gr 5, Full Thd;
-
2312SICHERUNGSSCHEIBE 3/8'';
-
244ABLASSSCHRAUBE; PLUG - pipe, magnetic (1/2'' NPT countersunk head)
-
2516GEWINDEBOLZEN; - mounting, final drive (42'' gauge and wider tractors)
-
2616SICHERUNGSMUTTER 5/8''-18, GB; NUT - lock (5/8'' - 18 NF) 48'' gauge and wider tractors
-
16SICHERUNGSMUTTER 5/8''-18, GA; NUT - lock (5/8'' - 18 NF) 36'' gauge tractors only
-
2ACHSMITTELSTÜCK; KIT - axle shaft (May be used to convert 48'' gauge tractors to use 10 spline axle shaft, coupling, and pinion)@@Includes: P/N's D31519, D31516, 08897AB, D32730 and D31514
-
11WELLE; - axle, final drive (48'' gauge tractor) 13-1/4'' long
-
21X; COUPLING - final drive (48'' gauge tractor) Use D32730 coupling assembly
-
1X; SNAP RING - D31516 coupling only (Not shown)
-
121KUPPLUNG; - final drive (48'' gauge tractor)
-
1SPRENGRING; SNAP RING - D32730 coupling assembly only (Not shown)
-
1DISTANZSTÜCK; - coupling (48'' gauge tractor) Not shown
-
131WELLE; PINION - final drive (48'' gauge tractor)
Select
Ref.
6Menge
10Verfügbarkeit
Teilenummer
14-740Beschreibung
SCHRAUBE Hex, 7/16'' - 20 x 2-1/2''Img
Select
Ref.
5Menge
18Verfügbarkeit
Teilenummer
13-724Beschreibung
SCHRAUBE Hex, 7/16'' - 14 x 1-1/2'', Gr 5Img
Select
Ref.
6Menge
10Verfügbarkeit
Teilenummer
13-736Beschreibung
SCHRAUBE Hex, 7/16'' - 14 x 2-1/4'', Gr 5Img
Select
Ref.
22Menge
12Verfügbarkeit
Teilenummer
13-620Beschreibung
SCHRAUBE Hex, 3/8'' - 16 x 1-1/4'', Gr 5, Full ThdImg
Select
Ref.
26Menge
16Verfügbarkeit
Teilenummer
231-46110Beschreibung
SICHERUNGSMUTTER 5/8''-18, GBImg
Select
Ref.
Menge
16Verfügbarkeit
Teilenummer
131-154Beschreibung
SICHERUNGSMUTTER 5/8''-18, GAImg