84379690 - KIT D'ENTRETIEN - CASE IH
Part # 84379690
DELIVERY INFO
Upper Cross Auger Kit #84379690 provides a smaller diameter auger that mounts to the top of the back beam. It helps transport large bushy crops like rape to the center deck. Otherwise, these large crops would go to the back sheet and then stop because they're not heavy enough for the side drapers to move across.
Package Weight:
- 272.109 kg
Package Length:
- 5969 mm
Package Width:
- 940 mm
Package Height:
- 940 mm
Package Quantity
- 1
Upper Cross Auger Kit #84379690 provides a smaller diameter auger that mounts to the top of the back beam. It helps transport large bushy crops like rape to the center deck. Otherwise, these large crops would go to the back sheet and then stop because they're not heavy enough for the side drapers to move across.
This part is used in the following kits and product bundles:
-
Rondelle de blocage Belleville de 10 mm (Di) x 22 mm (De) x 1,6 mm d'épaisseur16
-
Rondelle Belleville - 27 mm DE x 1,8 mm d'ép.8
-
Contre-écrou de classe 8 - M10 x 1,512
-
Roulement à billes - 25 mm (DI) x 52 mm (DE) x 15 mm (l) 2478291
-
Boulon de carrosserie - Cl 8,8 - M12 x 1,75 x 304
-
Boulon à tête hexagonale - Filetage complet – M8 x 20 mm L12
-
Boulon à tête hexagonale - Filetage complet - Cl 8.8 - M10 x 164
-
Vis à tête bombée - M8 x 1,2533
-
VIS A TETE BOMBEE2
-
Écrou hexagonal - 12 mm D6
-
Rondelle Belleville - 14 mm DE x 1,3 mm d'ép.5
-
Rondelle de blocage Belleville - Boulon M8 x 18 mm (De) x 1,4 mm d'épaisseur57
-
Elbow1
-
Cable Tie - Black - 208 mm L x 4.8 mm W8
-
Washer - 6.6 mm ID x 12 mm OD x 1.6 mm Thk3
-
Set Screw Collar - Zinc-Plated - 25 mm ID x 37 mm OD x 13 mm W1
-
Bearing Flange - Zinc-Plated - 52 mm ID x 80 mm L x 94 mm W x 7 mm Thk2
-
PIN1
-
Hex Lock Nut - M6 x 11
-
AUGER1
-
AUGER1
-
AUGER1
-
CARRIAGE BOLT12
-
Bolt - Cl 8.8 - M12 x 1002
-
SUPPORT1
-
HYDRAULIC HOSE2
-
HYDRAULIC MOTOR1
-
PIN4
-
BRACKET1
-
Right-Hand Bracket - Dark Gray1
-
Mechanical Cables and Controls - Dark Gray1
-
BRACKET1
-
SHIELD2
-
BRACKET2
-
BRACKET4
-
PADDLE4
-
STRIPPER1
-
STRIPPER1
-
Spacer4
-
BRACKET1
-
Upper Cross Hose - SAE 100R16 - 12.7 mm ID x 480 mm L2
-
JOINT2
-
VALVE1
-
Hex Bolt - Full Thread - M10 x 1.75 x 20 mm L4
-
Hex Nut - Cl 10 - M8 x 1.2545
-
BRACKET1
-
Coiled Pin - 3/8" x 2 1/2"1
-
PILLOW BLOCK2
-
Tube Clamp - 84 mm L x 21 mm H x 20 mm W2
-
STRIPPER1
-
STRIPPER1
-
BOLT3
-
Hex Nut - M6 x 14
-
SEAL1
This part is used in the following kits and product bundles:
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Quantity3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Quantity3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Quantity3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Quantity3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Quantity3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Quantity3
This part is used in the following kits and product bundles:
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Quantity3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Quantity3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Quantity3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Quantity3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Quantity3
-
Part NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.Quantity3
This part is used in the following kits and product bundles:
This part is used in the following kits and product bundles:
-
TypeKitPart NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
TypeKitPart NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
TypeKitPart NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
TypeKitPart NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
TypeKitPart NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
TypeKitPart NumberDescriptionLorem, ipsum dolor sit amet consectetur adipisicing elit.
There are no fitments for this product.
-
Model Name -
EQUIPMENT FITMENT -
Product Type -
Product Line
Check fitment and access technical drawings #84379690
Designed to guarantee top performance in all weather conditions, choose Alternator #84141452 for your tractor and harvesting equipment
High Power
- New generation able to supply high eleltrical demand
- optimal charging speed at all temperatures
Maintenance Free
- Superior design to ensure long lifespan with zero maintenance
High Power
- New generation able to supply high eleltrical demand
- optimal charging speed at all temperatures
Maintenance Free
- Superior design to ensure long lifespan with zero maintenance
Upper Cross Auger Kit #84379690 provides a smaller diameter auger that mounts to the top of the back beam. It helps transport large bushy crops like rape to the center deck. Otherwise, these large crops would go to the back sheet and then stop because they're not heavy enough for the side drapers to move across.
Package Weight:
- 272.109 kg
Package Length:
- 5969 mm
Package Width:
- 940 mm
Package Height:
- 940 mm
Package Quantity
- 1
This part is used in the following kits and product bundles:
-
Lorem, ipsum dolor sit amet consectetur adipisicing elit.3
-
Lorem, ipsum dolor sit amet consectetur adipisicing elit.3
-
Lorem, ipsum dolor sit amet consectetur adipisicing elit.3
-
Lorem, ipsum dolor sit amet consectetur adipisicing elit.3
-
Lorem, ipsum dolor sit amet consectetur adipisicing elit.3
-
Lorem, ipsum dolor sit amet consectetur adipisicing elit.3
This part is used in the following kits and product bundles:
-
Part NumberDescriptionRondelle de blocage Belleville de 10 mm (Di) x 22 mm (De) x 1,6 mm d'épaisseur.Quantity16
-
Part NumberDescriptionRondelle Belleville - 27 mm DE x 1,8 mm d'ép..Quantity8
-
Part NumberDescriptionContre-écrou de classe 8 - M10 x 1,5.Quantity12
-
Part NumberDescriptionRoulement à billes - 25 mm (DI) x 52 mm (DE) x 15 mm (l) 247829.Quantity1
-
Part NumberDescriptionBoulon de carrosserie - Cl 8,8 - M12 x 1,75 x 30.Quantity4
-
Part NumberDescriptionBoulon à tête hexagonale - Filetage complet – M8 x 20 mm L.Quantity12
-
Part NumberDescriptionBoulon à tête hexagonale - Filetage complet - Cl 8.8 - M10 x 16.Quantity4
-
Part NumberDescriptionVis à tête bombée - M8 x 1,25.Quantity33
-
Part NumberDescriptionVIS A TETE BOMBEE.Quantity2
-
Part NumberDescriptionÉcrou hexagonal - 12 mm D.Quantity6
-
Part NumberDescriptionRondelle Belleville - 14 mm DE x 1,3 mm d'ép..Quantity5
-
Part NumberDescriptionRondelle de blocage Belleville - Boulon M8 x 18 mm (De) x 1,4 mm d'épaisseur.Quantity57
-
Part NumberDescriptionElbow.Quantity1
-
Part NumberDescriptionCable Tie - Black - 208 mm L x 4.8 mm W.Quantity8
-
Part NumberDescriptionWasher - 6.6 mm ID x 12 mm OD x 1.6 mm Thk.Quantity3
-
Part NumberDescriptionSet Screw Collar - Zinc-Plated - 25 mm ID x 37 mm OD x 13 mm W.Quantity1
-
Part NumberDescriptionBearing Flange - Zinc-Plated - 52 mm ID x 80 mm L x 94 mm W x 7 mm Thk.Quantity2
-
Part NumberDescriptionPIN.Quantity1
-
Part NumberDescriptionHex Lock Nut - M6 x 1.Quantity1
-
Part NumberDescriptionAUGER.Quantity1
-
Part NumberDescriptionAUGER.Quantity1
-
Part NumberDescriptionAUGER.Quantity1
-
Part NumberDescriptionCARRIAGE BOLT.Quantity12
-
Part NumberDescriptionBolt - Cl 8.8 - M12 x 100.Quantity2
-
Part NumberDescriptionSUPPORT.Quantity1
-
Part NumberDescriptionHYDRAULIC HOSE.Quantity2
-
Part NumberDescriptionHYDRAULIC MOTOR.Quantity1
-
Part NumberDescriptionPIN.Quantity4
-
Part NumberDescriptionBRACKET.Quantity1
-
Part NumberDescriptionRight-Hand Bracket - Dark Gray.Quantity1
-
Part NumberDescriptionMechanical Cables and Controls - Dark Gray.Quantity1
-
Part NumberDescriptionBRACKET.Quantity1
-
Part NumberDescriptionSHIELD.Quantity2
-
Part NumberDescriptionBRACKET.Quantity2
-
Part NumberDescriptionBRACKET.Quantity4
-
Part NumberDescriptionPADDLE.Quantity4
-
Part NumberDescriptionSTRIPPER.Quantity1
-
Part NumberDescriptionSTRIPPER.Quantity1
-
Part NumberDescriptionSpacer.Quantity4
-
Part NumberDescriptionBRACKET.Quantity1
-
Part NumberDescriptionUpper Cross Hose - SAE 100R16 - 12.7 mm ID x 480 mm L.Quantity2
-
Part NumberDescriptionJOINT.Quantity2
-
Part NumberDescriptionVALVE.Quantity1
-
Part NumberDescriptionHex Bolt - Full Thread - M10 x 1.75 x 20 mm L.Quantity4
-
Part NumberDescriptionHex Nut - Cl 10 - M8 x 1.25.Quantity45
-
Part NumberDescriptionBRACKET.Quantity1
-
Part NumberDescriptionCoiled Pin - 3/8" x 2 1/2".Quantity1
-
Part NumberDescriptionPILLOW BLOCK.Quantity2
-
Part NumberDescriptionTube Clamp - 84 mm L x 21 mm H x 20 mm W.Quantity2
-
Part NumberDescriptionSTRIPPER.Quantity1
-
Part NumberDescriptionSTRIPPER.Quantity1
-
Part NumberDescriptionBOLT.Quantity3
-
Part NumberDescriptionHex Nut - M6 x 1.Quantity4
-
Part NumberDescriptionSEAL.Quantity1
This part is used in the following kits and product bundles:
-
KitLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
KitLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
KitLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
KitLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
KitLorem, ipsum dolor sit amet consectetur adipisicing elit.
-
KitLorem, ipsum dolor sit amet consectetur adipisicing elit.
This part is used in the following kits and product bundles:
There are no fitments for this product.
Check fitment and access technical drawings #84379690
DELIVERY INFO
Qty
Please select a dealer to view prices and stock information.