84589351 - SERVICE-SATZ - CASE IH

Teilenummer 84589351

Passt dieses Teil zu meiner Maschine

Cover more ground and minimize slippage with time-tested and field-proven track technology built to get your crops out efficiently. Track Kit #84589351 features:

• Speeds up to 20 mph — lower speed reductions on other aftermarket tracks accent the problem of not controlling the flow between PGA and transmission
• 36" wide tracks for better flotation (some competitors offer just 32" tracks)
• Center pivot provides equal ground pressure front to rear — not offset like others, with more weight on the rear than the front
• Lower pivot point for better flotation
• Hydraulic tensioning of tracks – not spring or hydraulic over spring like competition
• Includes mounting hardware, track final drives, hydraulic lines/hoses and two truss rods

The ground pressure of the 36" track is 12.2 psi which is about 50% less than an equally equipped combine on flotation tires. See your dealer for fit requirements, as they vary depending on the model and year.

As the Leader of the Track, we can promise better traction and less compaction thanks to uniquely designed track solutions for every application, width and cropping need.

*This item is a Dealer Installed Accessory.

Verpackungseinheit
  • 1

Cover more ground and minimize slippage with time-tested and field-proven track technology built to get your crops out efficiently. Track Kit #84589351 features:

• Speeds up to 20 mph — lower speed reductions on other aftermarket tracks accent the problem of not controlling the flow between PGA and transmission
• 36" wide tracks for better flotation (some competitors offer just 32" tracks)
• Center pivot provides equal ground pressure front to rear — not offset like others, with more weight on the rear than the front
• Lower pivot point for better flotation
• Hydraulic tensioning of tracks – not spring or hydraulic over spring like competition
• Includes mounting hardware, track final drives, hydraulic lines/hoses and two truss rods

The ground pressure of the 36" track is 12.2 psi which is about 50% less than an equally equipped combine on flotation tires. See your dealer for fit requirements, as they vary depending on the model and year.

As the Leader of the Track, we can promise better traction and less compaction thanks to uniquely designed track solutions for every application, width and cropping need.

*This item is a Dealer Installed Accessory.

Dieses Kit beinhaltet folgende Teile:

Teilenummer
Beschreibung
Menge

Dieses Kit beinhaltet folgende Teile:

  • Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Menge
    3
  • Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Menge
    3
  • Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Menge
    3
  • Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Menge
    3
  • Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Menge
    3
  • Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Menge
    3

Dieses Kit beinhaltet folgende Teile:

  • Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Menge
    3
  • Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Menge
    3
  • Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Menge
    3
  • Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Menge
    3
  • Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Menge
    3
  • Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    Menge
    3

Dieser Montagesatz beinhaltet folgende Teile:

Typ
Teilenummer
Beschreibung

Dieser Montagesatz beinhaltet folgende Teile:

  • Typ
    Kit
    Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Typ
    Kit
    Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Typ
    Kit
    Teilenummer
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Typ
    Kit
    Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Typ
    Kit
    Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Typ
    Kit
    Part Number
    #XXXXXX
    Beschreibung
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.

Keine Anwendbarkeit für aktuelles Produkt

    Prüfen Sie die Anwendbarkeit und greifen Sie auf technische Zeichnungen zu: #84589351

  • Modellname
  • ANWENDUNG
  • Produkttyp
  • Produktlinie

Designed to guarantee top performance in all weather conditions, choose Alternator #84141452 for your tractor and harvesting equipment

High Power
  • New generation able to supply high eleltrical demand
  • optimal charging speed at all temperatures
Maintenance Free
  • Superior design to ensure long lifespan with zero maintenance
High Power
  • New generation able to supply high eleltrical demand
  • optimal charging speed at all temperatures
Maintenance Free
  • Superior design to ensure long lifespan with zero maintenance

Cover more ground and minimize slippage with time-tested and field-proven track technology built to get your crops out efficiently. Track Kit #84589351 features:

• Speeds up to 20 mph — lower speed reductions on other aftermarket tracks accent the problem of not controlling the flow between PGA and transmission
• 36" wide tracks for better flotation (some competitors offer just 32" tracks)
• Center pivot provides equal ground pressure front to rear — not offset like others, with more weight on the rear than the front
• Lower pivot point for better flotation
• Hydraulic tensioning of tracks – not spring or hydraulic over spring like competition
• Includes mounting hardware, track final drives, hydraulic lines/hoses and two truss rods

The ground pressure of the 36" track is 12.2 psi which is about 50% less than an equally equipped combine on flotation tires. See your dealer for fit requirements, as they vary depending on the model and year.

As the Leader of the Track, we can promise better traction and less compaction thanks to uniquely designed track solutions for every application, width and cropping need.

*This item is a Dealer Installed Accessory.

Verpackungseinheit
  • 1

Dieses Kit beinhaltet folgende Teile:

Teilenummer
Beschreibung
Menge
  • #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    3
  • #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    3
  • #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    3
  • #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    3
  • #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    3
  • #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
    3

Dieses Kit beinhaltet folgende Teile:

  • Teilenummer
    150006
    Beschreibung
    DRAIN PLUG.
    Menge
    2
  • Teilenummer
    220025
    Beschreibung
    SEALING RING.
    Menge
    2
  • Teilenummer
    236558A1
    Beschreibung
    CLAMP.
    Menge
    2
  • Teilenummer
    300852
    Beschreibung
    NUT.
    Menge
    4
  • Teilenummer
    773187
    Beschreibung
    Cover Plate.
    Menge
    6
  • Teilenummer
    86507066
    Beschreibung
    M8 Flange Nut.
    Menge
    8
  • Teilenummer
    86508568
    Beschreibung
    Hex Bolt - Cl 8.8 - M6 x 1 x 16.
    Menge
    2
  • Teilenummer
    86512135
    Beschreibung
    HEX SOC SCREW.
    Menge
    1
  • Teilenummer
    80140184
    Beschreibung
    WASHER.
    Menge
    4
  • Teilenummer
    87485227
    Beschreibung
    BRACKET.
    Menge
    2
  • Teilenummer
    87485229
    Beschreibung
    BRACKET.
    Menge
    1
  • Teilenummer
    87485233
    Beschreibung
    FASTENER.
    Menge
    1
  • Teilenummer
    87485234
    Beschreibung
    FASTENER.
    Menge
    1
  • Teilenummer
    322357
    Beschreibung
    Belleville Washer - 14 mm OD x 1.3 mm Thk.
    Menge
    6
  • Teilenummer
    87498861
    Beschreibung
    BRACKET.
    Menge
    1
  • Teilenummer
    626826
    Beschreibung
    DOWEL.
    Menge
    4
  • Teilenummer
    84394484
    Beschreibung
    SPACER.
    Menge
    20
  • Teilenummer
    87568013
    Beschreibung
    WASHER.
    Menge
    2
  • Teilenummer
    86977789
    Beschreibung
    BOLT.
    Menge
    1
  • Teilenummer
    86978770
    Beschreibung
    Hydraulic Tube Connector.
    Menge
    3
  • Teilenummer
    84413261
    Beschreibung
    FINAL DRIVE.
    Menge
    2
  • Teilenummer
    84422482
    Beschreibung
    Bulkhead Mount Support.
    Menge
    2
  • Teilenummer
    84423565
    Beschreibung
    Right-Hand Track Tension Tube - 8 mm ID x 10 mm OD x 451 mm L.
    Menge
    1
  • Teilenummer
    84423567
    Beschreibung
    Tuyau de tension pour chenilles gauche - 8 mm (Di) x 10 mm (De) x 438 mm (L).
    Menge
    1
  • Teilenummer
    87000159
    Beschreibung
    COLLIER.
    Menge
    3
  • Teilenummer
    87010704
    Beschreibung
    CONTRE-ECROU EN VRAC.
    Menge
    4
  • Teilenummer
    394632
    Beschreibung
    Rondelle - Acier trempé - 21 mm (DI) x 40 mm (DE) x 4 mm d'ép..
    Menge
    32
  • Teilenummer
    84431546
    Beschreibung
    UNION.
    Menge
    2
  • Teilenummer
    84440951
    Beschreibung
    Arbre - 977 mm L.
    Menge
    1
  • Teilenummer
    84440957
    Beschreibung
    ARBRE D'ENTRAINEMENT.
    Menge
    1
  • Teilenummer
    84446910
    Beschreibung
    ANNEAU D'ARRET.
    Menge
    4
  • Teilenummer
    87024335
    Beschreibung
    Boulon - M20 x 80.
    Menge
    16
  • Teilenummer
    87024336
    Beschreibung
    Contre-écrou hexagonal - Cl 10 - M20 x 2,5.
    Menge
    16
  • Teilenummer
    84038824
    Beschreibung
    Bague d'espacement - 9 mm (Di) x 12 mm (De).
    Menge
    1
  • Teilenummer
    87656137
    Beschreibung
    VIS A EMBASE.
    Menge
    6
  • Teilenummer
    84130548
    Beschreibung
    BRACKET.
    Menge
    1
  • Teilenummer
    87282044
    Beschreibung
    Bouchon de décharge - M18 x 1,5 x 28.
    Menge
    2
  • Teilenummer
    87283497
    Beschreibung
    Autocollant de couple de serrage des boulons.
    Menge
    2
  • Teilenummer
    87670761
    Beschreibung
    VIS A EMBASE.
    Menge
    3
  • Teilenummer
    84149652
    Beschreibung
    Flexible de pression de la chenille hydraulique – SAE 100R17 – 9,53 mm de diam. int. x 1 000 mm de long.
    Menge
    2
  • Teilenummer
    84154339
    Beschreibung
    BROCHE.
    Menge
    4
  • Teilenummer
    87675531
    Beschreibung
    VIS A EMBASE.
    Menge
    2
  • Teilenummer
    87682412
    Beschreibung
    VIS 12 PT.
    Menge
    2
  • Teilenummer
    84172253
    Beschreibung
    COLLIER.
    Menge
    1
  • Teilenummer
    84172484
    Beschreibung
    ENTRETOISE.
    Menge
    1
  • Teilenummer
    84172494
    Beschreibung
    COLLIER.
    Menge
    1
  • Teilenummer
    84177560
    Beschreibung
    RACCORD EN T.
    Menge
    1
  • Teilenummer
    87698834
    Beschreibung
    VIS A EMBASE.
    Menge
    1
  • Teilenummer
    87331950
    Beschreibung
    CAPUCHON.
    Menge
    2
  • Teilenummer
    84817215
    Beschreibung
    BOUCHON.
    Menge
    2
  • Teilenummer
    87367550
    Beschreibung
    Sechskantflansch-Schraube - Cl 12.9 - M22 x 1,5 x 95.
    Menge
    20
  • Teilenummer
    84989399
    Beschreibung
    Stange.
    Menge
    2
  • Teilenummer
    86050300
    Beschreibung
    FLANSCHMUTTER.
    Menge
    4
  • Teilenummer
    86050346
    Beschreibung
    KLEMME.
    Menge
    2
  • Teilenummer
    86500688
    Beschreibung
    Sechskantmutter - M6 x 1.
    Menge
    4

Dieser Montagesatz beinhaltet folgende Teile:

Typ
Teilenummer
Beschreibung
  • Kit
    #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Kit
    #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Kit
    #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Kit
    #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Kit
    #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.
  • Kit
    #XXXXXX
    Lorem, ipsum dolor sit amet consectetur adipisicing elit.

Dieser Montagesatz beinhaltet folgende Teile:

Keine Anwendbarkeit für aktuelles Produkt

    Prüfen Sie die Anwendbarkeit und greifen Sie auf technische Zeichnungen zu: #84589351

LIEFERINFORMATIONEN

Wählen Sie einen Händler aus, um die Lieferoptionen anzuzeigen

Menge

1
ZUM WARENKORB HINZUFÜGEN